Raptor85 Apprentice
Joined: 29 Dec 2007 Posts: 208
|
Posted: Sun Dec 06, 2009 4:22 am Post subject: SATA_PMP using rt-sources, only first drive seen |
|
|
I'm having some issues getting PMP working on a new kernel, I'm not sure what I'm missing but though everything looks correct it's still seeing only the first drive. This is attempting to connect to a pair of 250GB drives docked in a vantec NST-D200SU hard drive dock. Any thoughts or ideas, something I may have overlooked?
uname -a
Code: | Linux raptop 2.6.31.6-rt19 #1 PREEMPT RT Mon Nov 16 13:48:35 PST 2009 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux |
relevant lspci -v output
Code: | 02:00.0 Mass storage controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
I/O ports at 1410 [size=8]
I/O ports at 1420 [size=4]
I/O ports at 1418 [size=8]
I/O ports at 1424 [size=4]
I/O ports at 1400 [size=16]
Memory at 24000000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 20000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Kernel driver in use: sata_sil
Kernel modules: sata_sil |
grep SATA .config
Code: | CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set |
lsmod | grep sata
dmesg output
Code: | [ 705.000775] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 735.750778] sd 3:0:0:0: [sdb] Stopping disk
[ 735.775000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 735.775899] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 735.776080] sd 3:0:0:0: [sdb] Write Protect is off
[ 735.776090] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 735.776160] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 735.776553] sdb: sdb1 |
|
|