| View previous topic :: View next topic |
| Author |
Message |
alextz
n00b
Joined: 04 Jan 2006
Posts: 62
Location: Romania
|
 Posted: Tue Feb 02, 2010 7:11 pm Post subject: DVD drive not working as expected [SOLVED] |
 |
|
Since sometime ago my DVD-RW drive is not working as expected.
If I put a blank/written DVD in it , it doesn't seem to be noticing it, it thinks that there is no media in the drive. If I reboot it finds the disk in it but if i want to eject it, it doesn't do it.The disk is writeable this way. Pressing the button just makes it go out and then back again.
I keep getting like
| Code: |
hda: request sense failure: status=0xd0 { Busy }
hda: possibly failed opcode: 0xa0
|
in dmesg.
Any ideeas?
Last edited by alextz on Sat Feb 06, 2010 4:42 pm; edited 1 time in total |
|
| Back to top |
|
 |
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Feb 03, 2010 1:44 am Post subject: |
|
|
post | Quote: | lspci -k
cat /etc/fstab |
|
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Wed Feb 03, 2010 1:58 am Post subject: |
|
|
I don't know about the first one, but the "no eject" feature
will probably go away once you switch to a pure CONFIG_ATA setup. |
|
| Back to top |
|
|
alextz
n00b
Joined: 04 Jan 2006
Posts: 62
Location: Romania
|
| Posted: Wed Feb 03, 2010 2:51 pm Post subject: |
|
|
lspci -k
| Code: |
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
Subsystem: Giga-byte Technology Device 5000
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
Kernel driver in use: pcieport
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Subsystem: Giga-byte Technology Device a002
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
00:1f.2 SATA controller: Intel Corporation 82801IB (ICH9) 4 port SATA AHCI Controller (rev 02)
Subsystem: Giga-byte Technology Device b005
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2)
Subsystem: Giga-byte Technology Device 3468
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: ahci
03:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: JMicron IDE
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: r8169
|
and cat /etc/fstab
| Code: | /dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sda3 / ext3 noatime 0 1
/dev/sda2 none swap sw 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
/dev/sdb1 /home/ ext3 defaults 0 1
/dev/sdc1 /home/alextz/Hard2 ext4 rw,suid,dev,exec,auto,user,async 0 1
#/dev/fd0 /mnt/floppy auto noauto 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Feb 03, 2010 5:14 pm Post subject: |
|
|
| try commenting out the cdrom line in fstab and allowing dbus/hal/udev to handle it |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Wed Feb 03, 2010 6:46 pm Post subject: |
|
|
| DONAHUE wrote: | | try commenting out the cdrom line in fstab and allowing dbus/hal/udev to handle it |
And if (once) that fails, try the migration.
Actually, try it regardless, it's how it's supposed to be for a few kernel versions. |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Feb 03, 2010 8:16 pm Post subject: |
|
|
@ Void
What do the phrases:
'pure CONFIG_ATA setup'
'try the migration'
mean? Too cryptic for a non Mage like me.
His lspci -k has all appropriate and only libata drivers in use. |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Wed Feb 03, 2010 8:57 pm Post subject: |
|
|
If there's a /dev/hd*, it's most probably not a pure setup,
in case of a cdrom, it should be /dev/sr*. |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Feb 03, 2010 9:19 pm Post subject: |
|
|
@Void
Now I understand you.
Even though he shows the libata drivers in use there may be an interference if <*> ATA/ATAPI/MFM/RLL support ---> is marked in the menuconfig.
@alex
if commenting cdrom out of fstab does not change the problem:
recommend running:
| Code: | | grep CONFIG_IDE /usr/src/linux/.config |
which should yield:
| Quote: | | CONFIG_IDE is not set |
if:
is produced instead, I'd recommend reconfiguring, recompiling, resaving the kernel with < > ATA/ATAPI/MFM/RLL support ---> marked in the menuconfig. |
|
| Back to top |
|
|
cyrillic
Watchman
Joined: 19 Feb 2003
Posts: 7313
Location: Groton, Massachusetts USA
|
| Posted: Thu Feb 04, 2010 12:44 am Post subject: |
|
|
| DONAHUE wrote: | | His lspci -k has all appropriate and only libata drivers in use. |
No, you missed one.
| lspci -k: | 03:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: JMicron IDE |
It should say
| Code: | | Kernel driver in use: pata_jmicron |
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Feb 04, 2010 12:54 am Post subject: |
|
|
| Duh, thanks. |
|
| Back to top |
|
|
alextz
n00b
Joined: 04 Jan 2006
Posts: 62
Location: Romania
|
| Posted: Thu Feb 04, 2010 8:51 pm Post subject: |
|
|
| How can I exclude ATA/ATAPI/IDE when my DVD-RW is an IDE drive? |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Feb 04, 2010 9:38 pm Post subject: |
|
|
menuconfig as:
| Quote: | Device Drivers --->
< > ATA/ATAPI/MFM/RLL support --->
SCSI device support --->
*** SCSI support type (disk, tape, CD-ROM) ***
<*> SCSI disk support
< > SCSI tape support
< > SCSI OnStream SC-x0 tape support
<*> SCSI CDROM support
<*> Serial ATA (prod) and Parallel ATA (experimental) drivers --->
--- Serial ATA (prod) and Parallel ATA (experimental) drivers
[*] ATA ACPI Support
[ ] SATA Port Multiplier support
<*> AHCI SATA support
< > Silicon Image 3124/3132 SATA support
[*] ATA SFF support
< > ServerWorks Frodo / Apple K2 SATA support
< > Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support
< > Marvell SATA support (HIGHLY EXPERIMENTAL)
< > NVIDIA SATA support
< > Pacific Digital ADMA support
< > Pacific Digital SATA QStor support
< > Promise SATA TX2/TX4 support
< > Promise SATA SX4 support
< > Silicon Image SATA support
< > SiS 964/965/966/180 SATA support
< > ULi Electronics SATA support
< > VIA SATA support
< > VITESSE VSC-7174 / INTEL 31244 SATA support
< > Initio 162x SATA support
< > ACPI firmware driver for PATA
< > ALi PATA support (Experimental)
< > AMD/NVidia PATA support
< > ARTOP 6210/6260 PATA support
< > ATI PATA support
< > CMD640 PCI PATA support (Very Experimental)
< > CMD64x PATA support
< > CS5510/5520 PATA support
< > CS5530 PATA support (Experimental)
< > Cypress CY82C693 PATA support (Very Experimental)
< > EFAR SLC90E66 support
< > Generic ATA support
< > HPT 366/368 PATA support
< > HPT 370/370A/371/372/374/302 PATA support (Experimental)
< > HPT 372N/302N PATA support (Very Experimental)
< > HPT 343/363 PATA support
< > IT8211/2 PATA support
< > IT8213 PATA support (Experimental)
<*> JMicron PATA support
< > Compaq Triflex PATA support
< > Marvell PATA support via legacy mode
< > Intel PATA MPIIX support
< > Intel PATA old PIIX support
< > NETCELL Revolution RAID support
< > Ninja32/Delkin Cardbus ATA support (Experimental)
< > Nat Semi NS87415 PATA support (Experimental)
< > OPTI621/6215 PATA support (Very Experimental)
< > OPTI FireStar PATA support (Very Experimental)
< > Older Promise PATA controller support (Experimental)
< > RADISYS 82600 PATA support (Very Experimental)
< > PC Tech RZ1000 PATA support
< > SC1200 PATA support (Very Experimental)
< > SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support
< > Promise PATA 2027x support
< > CMD / Silicon Image 680 PATA support
< > SiS PATA support (Experimental)
< > VIA PATA support
< > Winbond SL82C105 PATA support
< > Intel SCH PATA support |
and recompile, resave kernel |
|
| Back to top |
|
|
alextz
n00b
Joined: 04 Jan 2006
Posts: 62
Location: Romania
|
| Posted: Fri Feb 05, 2010 4:12 pm Post subject: |
|
|
Ok, I think it can be marked as SOLVED.
Thank you! |
|
| Back to top |
|
|
|
Kernel & Hardware
