Creating an adhoc wireless network

dE_logics · Advocate Joined: 02 Jan 2009 Posts: 2317 Location: $TERM

Is there any guide or something? Cause apparently nothing is working.

This does not work, but produces no errors -

/sbin/iwconfig eth1 mode ad-hoc
/sbin/iwconfig eth1 key 6572747975
/sbin/iwconfig eth1 channel 9
/sbin/iwconfig eth1 essid ADHOC

The interface eth1 is still inactive and on restarting too nothing happens.

I have eth1_config ( 187.4.2.4/8 ) in conf.d/net
_________________
My blog

dE_logics · Advocate Joined: 02 Jan 2009 Posts: 2317 Location: $TERM

Ok, so this should have worked?
_________________
My blog

eccerr0r · Posted: Thu Jun 17, 2010 3:48 pm Post subject:

I think you still need to ifconfig eth1 up, and set an ip address... can you manually up the interface?

Another issue I ran into (in general) is that sometimes firmware doesn't load properly... any hints of issues in dmesg?

though honestly I've never tried this before, only mucked with managed mode with a dedicated access point.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?

dE_logics · Advocate Joined: 02 Jan 2009 Posts: 2317 Location: $TERM

Up, the interface was up.

Will checkout the dmesg output soon...
_________________
My blog