| View previous topic :: View next topic |
| Author |
Message |
mikb
Tux's lil' helper
Joined: 14 Dec 2005
Posts: 124
Location: Sydney Australia
|
 Posted: Wed Aug 18, 2010 12:51 pm Post subject: Problem with b43 and WPA2 |
 |
|
I have a Broadcom 4312 (14e4:4315), using the b43 driver in 2.6.35.
Everything works fine with WPA-PSK (TKIP encryption), but it won't associate to networks using WPA2-PSK (CCMP or AES)
Advice or suggestions?
_________________
With sufficient thrust, pigs fly just fine (RFC 1925, apparently talking about Gentoo) |
|
| Back to top |
|
 |
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Wed Aug 18, 2010 12:59 pm Post subject: |
|
|
Yes, can you post your crypto section from your .config ?
Are you sure that you have enabled AES encryption option ? |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Wed Aug 18, 2010 1:00 pm Post subject: |
|
|
| Also, can you post your dmesg when you try to connect to your AP ? |
|
| Back to top |
|
|
chithanh
Developer
Joined: 05 Aug 2006
Posts: 2158
Location: Berlin, Germany
|
| Posted: Wed Aug 18, 2010 3:05 pm Post subject: |
|
|
| Also helpful may be wpa_supplicant -d output. |
|
| Back to top |
|
|
mikb
Tux's lil' helper
Joined: 14 Dec 2005
Posts: 124
Location: Sydney Australia
|
| Posted: Thu Aug 19, 2010 1:05 pm Post subject: |
|
|
| d2_racing wrote: | Yes, can you post your crypto section from your .config ?
Are you sure that you have enabled AES encryption option ? |
From /usr/src/linux-2.6.35-gentoo-r1/.config:
| Code: |
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
|
I believe that means AES is set.
_________________
With sufficient thrust, pigs fly just fine (RFC 1925, apparently talking about Gentoo) |
|
| Back to top |
|
|
mikb
Tux's lil' helper
Joined: 14 Dec 2005
Posts: 124
Location: Sydney Australia
|
| Posted: Thu Aug 19, 2010 1:20 pm Post subject: |
|
|
| d2_racing wrote: | | Also, can you post your dmesg when you try to connect to your AP ? |
dmesg:
| Code: | [ 6435.082768] wlan0: authenticate with 00:1f:1f:35:7a:b9 (try 1)
[ 6435.084063] wlan0: authenticated
[ 6435.084338] wlan0: associate with 00:1f:1f:35:7a:b9 (try 1)
[ 6435.088358] wlan0: RX AssocResp from 00:1f:1f:35:7a:b9 (capab=0x411 status=0 aid=3)
[ 6435.088362] wlan0: associated
[ 6465.137206] wlan0: deauthenticating from 00:1f:1f:35:7a:b9 by local choice (reason=3)
[ 6465.142230] cfg80211: Calling CRDA to update world regulatory domain
|
/var/log/messages:
| Code: | Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.298896] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.298905] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 44 (44).
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299225] [wpa.c:443] wpa_parse_wpa_ie(): WPA IE: -------------------
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299257] [wpa.c:444] wpa_parse_wpa_ie(): proto 0x4
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299266] [wpa.c:445] wpa_parse_wpa_ie(): pw cipher 0x8
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299274] [wpa.c:446] wpa_parse_wpa_ie(): gr cipher 0x8
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299284] [wpa.c:447] wpa_parse_wpa_ie(): key mgmt 0x2
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299293] [wpa.c:448] wpa_parse_wpa_ie(): capabilities 0x0
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299302] [wpa.c:449] wpa_parse_wpa_ie(): # pmkid 0x0
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299311] [wpa.c:450] wpa_parse_wpa_ie():
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299371] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 70/70/0x46, level -39/217/0xD9, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299382] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299392] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 100 (100).
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299578] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 26/26/0x1A, level -84/172/0xAC, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299592] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:37 tristen NetworkManager[8376]: <debug> [1282223497.299600] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 37 (37).
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) starting connection 'Home'
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): device state change: 4 -> 5 (reason 0)
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0/wireless): access point 'Home' has security, but secrets are required.
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): device state change: 5 -> 6 (reason 0)
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Aug 19 23:11:39 tristen NetworkManager[8376]: <warn> Failed to update connection secrets: 1 802-1x
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): device state change: 6 -> 4 (reason 0)
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): device state change: 4 -> 5 (reason 0)
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0/wireless): connection 'Home' has security, and secrets exist. No new secrets needed.
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Config: added 'ssid' value 'ynefel'
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Config: added 'scan_ssid' value '1'
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Config: added 'psk' value '<omitted>'
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> Config: set interface ap_scan to 1
Aug 19 23:11:39 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: disconnected -> scanning
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.486640] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: scanning -> associating
Aug 19 23:11:40 tristen kernel: [ 6435.082768] wlan0: authenticate with 00:1f:1f:35:7a:b9 (try 1)
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.496079] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.496153] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.496192] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.496226] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:11:40 tristen kernel: [ 6435.084063] wlan0: authenticated
Aug 19 23:11:40 tristen kernel: [ 6435.084338] wlan0: associate with 00:1f:1f:35:7a:b9 (try 1)
Aug 19 23:11:40 tristen kernel: [ 6435.088358] wlan0: RX AssocResp from 00:1f:1f:35:7a:b9 (capab=0x411 status=0 aid=3)
Aug 19 23:11:40 tristen kernel: [ 6435.088362] wlan0: associated
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.503084] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x11003
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.503179] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x11003
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.503214] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x11003
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: associating -> associated
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: associated -> 4-way handshake
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: 4-way handshake -> group handshake
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.515194] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x11043
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): supplicant connection state: group handshake -> completed
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'ynefel'.
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): device state change: 5 -> 7 (reason 0)
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.516324] [nm-dhcp-dhcpcd.c:143] real_ip4_start(): running: /sbin/dhcpcd -B -K -L -c /usr/libexec/nm-dhcp-client.action wlan0
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> dhcpcd started with pid 9760
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Aug 19 23:11:40 tristen dhcpcd[9760]: version 5.2.7 starting
Aug 19 23:11:40 tristen dhcpcd[9760]: wlan0: broadcasting for a lease
Aug 19 23:11:40 tristen NetworkManager[8376]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Aug 19 23:11:40 tristen NetworkManager[8376]: <debug> [1282223500.534589] [nm-device.c:1373] dhcp_state_changed(): (wlan0): new DHCPv4 client state 7
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1532] [wpa.c:443] wpa_parse_wpa_ie(): WPA IE: -------------------
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1570] [wpa.c:444] wpa_parse_wpa_ie(): proto 0x4
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1580] [wpa.c:445] wpa_parse_wpa_ie(): pw cipher 0x8
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1590] [wpa.c:446] wpa_parse_wpa_ie(): gr cipher 0x8
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1598] [wpa.c:447] wpa_parse_wpa_ie(): key mgmt 0x2
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1606] [wpa.c:448] wpa_parse_wpa_ie(): capabilities 0x0
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1614] [wpa.c:449] wpa_parse_wpa_ie(): # pmkid 0x0
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1622] [wpa.c:450] wpa_parse_wpa_ie():
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1709] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 31/31/0x1F, level -79/177/0xB1, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1720] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1730] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 44 (44).
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1980] [wpa.c:443] wpa_parse_wpa_ie(): WPA IE: -------------------
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.1993] [wpa.c:444] wpa_parse_wpa_ie(): proto 0x4
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2001] [wpa.c:445] wpa_parse_wpa_ie(): pw cipher 0x8
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2009] [wpa.c:446] wpa_parse_wpa_ie(): gr cipher 0x8
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2016] [wpa.c:447] wpa_parse_wpa_ie(): key mgmt 0x2
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2023] [wpa.c:448] wpa_parse_wpa_ie(): capabilities 0x0
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2031] [wpa.c:449] wpa_parse_wpa_ie(): # pmkid 0x0
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2038] [wpa.c:450] wpa_parse_wpa_ie():
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2158] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 70/70/0x46, level -37/219/0xDB, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2169] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2179] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 100 (100).
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2388] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 26/26/0x1A, level -84/172/0xAC, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2402] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:11:42 tristen NetworkManager[8376]: <debug> [1282223502.2410] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 37 (37).
Aug 19 23:12:10 tristen dhcpcd[9760]: timed out
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> (wlan0): DHCPv4 client pid 9760 exited with status 1
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.538548] [nm-device.c:1373] dhcp_state_changed(): (wlan0): new DHCPv4 client state 7
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) scheduled...
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) started...
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> (wlan0): device state change: 7 -> 9 (reason 5)
Aug 19 23:12:10 tristen NetworkManager[8376]: <warn> Activation (wlan0) failed for access point (ynefel)
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> Marking connection 'Home' invalid.
Aug 19 23:12:10 tristen NetworkManager[8376]: <warn> Activation (wlan0) failed.
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) complete.
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.539376] [nm-device.c:3600] failed_to_disconnected(): (wlan0): running failed->disconnected transition
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> (wlan0): device state change: 9 -> 3 (reason 0)
Aug 19 23:12:10 tristen NetworkManager[8376]: <info> (wlan0): deactivating device (reason: 0).
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.539955] [nm-system.c:223] sync_addresses(): (wlan0): syncing addresses (family 2)
Aug 19 23:12:10 tristen kernel: [ 6465.137206] wlan0: deauthenticating from 00:1f:1f:35:7a:b9 by local choice (reason=3)
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.552676] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.554120] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:12:10 tristen kernel: [ 6465.142230] cfg80211: Calling CRDA to update world regulatory domain
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.556955] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1043
Aug 19 23:12:10 tristen NetworkManager[8376]: <debug> [1282223530.557049] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1043
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.295904] [nm-netlink-monitor.c:117] link_msg_handler(): netlink link message: iface idx 3 flags 0x1003
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298394] [wpa.c:443] wpa_parse_wpa_ie(): WPA IE: -------------------
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298438] [wpa.c:444] wpa_parse_wpa_ie(): proto 0x4
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298448] [wpa.c:445] wpa_parse_wpa_ie(): pw cipher 0x8
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298457] [wpa.c:446] wpa_parse_wpa_ie(): gr cipher 0x8
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298465] [wpa.c:447] wpa_parse_wpa_ie(): key mgmt 0x2
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298473] [wpa.c:448] wpa_parse_wpa_ie(): capabilities 0x0
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298482] [wpa.c:449] wpa_parse_wpa_ie(): # pmkid 0x0
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298489] [wpa.c:450] wpa_parse_wpa_ie():
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298581] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 31/31/0x1F, level -79/177/0xB1, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298591] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298600] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 44 (44).
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298893] [wpa.c:443] wpa_parse_wpa_ie(): WPA IE: -------------------
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298908] [wpa.c:444] wpa_parse_wpa_ie(): proto 0x4
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298916] [wpa.c:445] wpa_parse_wpa_ie(): pw cipher 0x8
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298924] [wpa.c:446] wpa_parse_wpa_ie(): gr cipher 0x8
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298932] [wpa.c:447] wpa_parse_wpa_ie(): key mgmt 0x2
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298939] [wpa.c:448] wpa_parse_wpa_ie(): capabilities 0x0
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298948] [wpa.c:449] wpa_parse_wpa_ie(): # pmkid 0x0
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.298956] [wpa.c:450] wpa_parse_wpa_ie():
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299013] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 70/70/0x46, level -35/221/0xDD, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299024] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299033] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 100 (100).
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299303] [nm-device-wifi.c:1551] wireless_qual_to_percent(): QL: qual 28/28/0x1C, level -82/174/0xAE, noise 0/0/0x0, updated: 0x43 ** MAX: qual 70/70/0x46, level -110/146/0x92, noise 0/0/0x0, updated: 0x4B
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299315] [nm-device-wifi.c:1611] wireless_qual_to_percent(): QL2: level_percent is 100. max_level 146, level 146.
Aug 19 23:12:37 tristen NetworkManager[8376]: <debug> [1282223557.299323] [nm-device-wifi.c:1621] wireless_qual_to_percent(): QL: Final quality percent is 40 (40).
|
_________________
With sufficient thrust, pigs fly just fine (RFC 1925, apparently talking about Gentoo) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
