| View previous topic :: View next topic |
| Author |
Message |
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
 Posted: Tue Nov 16, 2010 5:14 pm Post subject: |
 |
|
| Code: | (chroot) ubuntu / # lsmod
Module Size Used by
binfmt_misc 7984 1
dm_crypt 13381 0
lp 10201 0
p54usb 12616 0
p54common 28946 1 p54usb
rt73usb 24308 0
crc_itu_t 1739 1 rt73usb
snd_intel8x0 31307 2
snd_ac97_codec 125227 1 snd_intel8x0
ac97_bus 1474 1 snd_ac97_codec
arc4 1497 2
snd_pcm 89104 2 snd_intel8x0,snd_ac97_codec
rt2500usb 19651 0
snd_seq_midi 5932 0
snd_rawmidi 22207 1 snd_seq_midi
rt2x00usb 11316 2 rt73usb,rt2500usb
rt2x00lib 31575 3 rt73usb,rt2500usb,rt2x00usb
snd_seq_midi_event 7291 1 snd_seq_midi
snd_seq 57512 2 snd_seq_midi,snd_seq_midi_event
led_class 3393 2 p54common,rt2x00lib
mac80211 266657 4 p54usb,p54common,rt2x00usb,rt2x00lib
snd_timer 23850 2 snd_pcm,snd_seq
ppdev 6804 0
snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 64117 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 30086 1
cfg80211 170293 3 p54common,rt2x00lib,mac80211
parport 37032 3 lp,ppdev,parport_pc
edac_core 46822 0
soundcore 1240 1 snd
shpchp 34910 0
edac_mce_amd 9387 0
i2c_nforce2 6155 0
k8temp 4064 0
snd_page_alloc 8588 2 snd_intel8x0,snd_pcm
joydev 11363 0
squashfs 27681 1
aufs 179029 4329
nls_cp437 6375 1
isofs 34218 1
dm_raid45 75026 0
xor 4709 1 dm_raid45
btrfs 506518 0
zlib_deflate 21866 1 btrfs
crc32c 3007 1
libcrc32c 1268 1 btrfs
nouveau 568848 2
ttm 68212 1 nouveau
drm_kms_helper 32836 1 nouveau
usbhid 42062 0
hid 84678 1 usbhid
drm 206161 4 nouveau,ttm,drm_kms_helper
i2c_algo_bit 6208 1 nouveau
floppy 65299 0
forcedeth 55649 0
sata_nv 23770 2
pata_amd 12050 1
ramzswap 11551 0
lzo_compress 2349 1 ramzswap
(chroot) ubuntu / # lsusb -v | wgetpaste
Your paste can be seen here: http://paste.pocoo.org/show/292129/
(chroot) ubuntu / #
(chroot) ubuntu / # lspci -n
00:00.0 0600: 10de:00e1 (rev a1)
00:01.0 0601: 10de:00e0 (rev a2)
00:01.1 0c05: 10de:00e4 (rev a1)
00:02.0 0c03: 10de:00e7 (rev a1)
00:02.1 0c03: 10de:00e7 (rev a1)
00:02.2 0c03: 10de:00e8 (rev a2)
00:05.0 0680: 10de:00df (rev a2)
00:06.0 0401: 10de:00ea (rev a1)
00:08.0 0101: 10de:00e5 (rev a2)
00:09.0 0101: 10de:00ee (rev a2)
00:0a.0 0101: 10de:00e3 (rev a2)
00:0b.0 0604: 10de:00e2 (rev a2)
00:0e.0 0604: 10de:00ed (rev a2)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:00f2 (rev a2)
(chroot) ubuntu / #
|
|
|
| Back to top |
|
 |
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Tue Nov 16, 2010 6:54 pm Post subject: |
|
|
while in chroot:
| Code: | wgetpaste -s ca /usr/src/linux/.config
wgetpaste /var/log/dmesg |
have you still got emerge problems?
how many rc-update are still failing? |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Tue Nov 16, 2010 8:10 pm Post subject: |
|
|
| Code: | (chroot) ubuntu / # wgetpaste -s ca /usr/src/linux/.config
Your paste can be seen here: http://pastebin.ca/1993764
(chroot) ubuntu / # wgetpaste /var/log/dmesg
/usr/bin/wgetpaste: /var/log/dmesg No such file found.
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Nov 17, 2010 12:25 am Post subject: |
|
|
| Code: | sudo su --
mkdir /mnt/gentoo
mount /dev/sda3 /mnt/gentoo
mount /dev/sda3 /mnt/gentoo/boot
mount -o bind /proc /mnt/gentoo/proc
mount -o bind /dev /mnt/gentoo/dev
chroot /mnt/gentoo /bin/env -i TERM=$TERM /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"
date
#date MMDDHHMMYYYY #if needed
cd /usr/src/linux
make menuconfig |
Edit menuconfig to:
| Quote: | Library routines --->
{M} CRC-CCITT functions
-*- CRC16 functions
<*> CRC calculation for the T10 Data Integrity Field
-*- CRC ITU-T V.41 functions
-*- CRC32 functions
< > CRC7 functions
< > CRC32c (Castagnoli, et al) Cyclic Redundancy-Check |
my ralink driver, according to lsmod is used by module crc-citt, yours is not, your config does not have CONFIG_CRC-CCITT=m
Then:
| Code: | make && make modules_install
cp arch/x86/boot/bzImage /boot/kernel-2.6.34-gentoo-r12 |
We have not specifically addressed the firmware license and the rt73-firmware ebuild may not have handled the problem, so:
| Code: | | echo "net-wireless/rt73-firmware ralink-firmware" >> /etc/portage/package.license |
All about licenses is here
I am a complete license sleaze and have | Quote: | | ACCEPT_LICENSE="*" |
in /etc/make.conf which accepts anything anytime.
After licensing:
try gentoo again
when up. does wlan0 exist??
if not:
| Code: | /etc/init.d/net.wlan0 stop
modprobe -r rt73usb
modprobe rt73usb
/etc/init.d/net.wlan0 restart
dmesg tail > /root/dm.out
reboot
|
reboot to ubuntu: | Code: | sudo su --
mkdir /mnt/gentoo
mount /dev/sda3 /mnt/gentoo
mount /dev/sda3 /mnt/gentoo/boot
mount -o bind /proc /mnt/gentoo/proc
mount -o bind /dev /mnt/gentoo/dev
chroot /mnt/gentoo /bin/env -i TERM=$TERM /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"
date
#date MMDDHHMMYYYY #if needed
wgetpaste /root/dm.out
wgetpaste /var/log/dmesg |
Last edited by DONAHUE on Thu Nov 18, 2010 12:21 am; edited 1 time in total |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Wed Nov 17, 2010 3:09 am Post subject: |
|
|
On reboot, ifconfig -a just shows eth0, lo and sit0. "/etc/init.d/net.wlan0 stop " returns: ERROR: cannot run net.wlan0 stop until sysinit completes net.wlan0 will be started in the boot runlevel
modprobe -r rt73usb returns nothing
modprobe rt73usb returns FATAL: Error inserting rt73usb (/lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko): Unknown symbol in module, or unknown parameter (see dmesg
/etc/init.d/net.wlan0 restart shows: Error: Cannot run wlan0 until sysinit completes
net.wlan0 will be started in the boot runlevel
dmesg tail > /root/dm.out shows: /root/dm.out: read-only file system
reboot is strange. Returns "shutdown: /dev/initctl: No such file or directory
init: /dev/initctl: No such file or directory
Going for reboot, then Ubuntu
| Code: | /usr/bin/wgetpaste: /root/dm.out No such file found.
(chroot) ubuntu / # wgetpaste /var/log/dmesg
/usr/bin/wgetpaste: /var/log/dmesg No such file found.
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Nov 17, 2010 6:18 am Post subject: |
|
|
it looks a lot like the filesystem is mounted read only or permissions are screwed up in the gentoo system
boot ubuntu mount the gentoo partitions, post the contents of /etc/fstab,
| Code: | | ls -l /mount/gentoo |
look for something like drwxr-xr-x 3 root root 3352 Nov 9 20:46 bin
where the rw says read/write and r- says read only
if fstab is ok, when you can boot gentoo, run
look for something like /dev/sda3 on / type ext3 (rw,noatime,notail)
where the rw says read/write and ro says read only
look for something like drwxr-xr-x 3 root root 3352 Nov 9 20:46 bin
where the rw says read/write and r- says read only |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Wed Nov 17, 2010 11:01 am Post subject: |
|
|
| Code: | # <fs> <mountpoint> <type> <opts> <dump/pass>
/dev/sda3 / ext3 noatime,notail 0 1
/dev/sda2 none swap sw 0 0
/dev/sda1 /boot ext2 defaults 0 0
shm /dev/shm tmpfs defaults 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
(chroot) ubuntu / #
(chroot) ubuntu / # ls -l /mount/gentoo
ls: cannot access /mount/gentoo: No such file or directory
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Nov 17, 2010 3:15 pm Post subject: |
|
|
sorry, I misspelled mount in /mnt/gentoo
if booted in gentoo, need output from mount while gentoo is booted the most
| Code: | ls -l / | grep -i sbin
mount | grep -i sda3 |
or
from ubuntu with gentoo partitions mounted but not in the chroot
from ubuntu with gentoo partitions mounted but not in the chroot
or
booted ubuntu with gentoo partitions mounted and in the chroot
post results |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Wed Nov 17, 2010 4:25 pm Post subject: |
|
|
Showing drwxr-xr-x, I have bin, boot, dev, etc, home, lib32, lib64, mnt, opt, sbin, sys, usr and var.
Kernel shows -rw-r--r--
lib -> lib64 shows lrwxrwxrwx
lost+found shows drwx------
portage shows -rw-r--r--
proc shows dr-xr-xr-x
root shows drwx------
stage3 shows -rw-r--r--
temp is drwxrwxrwt |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Nov 17, 2010 5:00 pm Post subject: |
|
|
boot ubuntu
| Code: | sudo su --
mkdir /mnt/gentoo
mount /dev/sda3 /mnt/gentoo
nano /mnt/gentoo/etc/fstab
|
edit fstab to: (removing notail) | Code: |
# <fs> <mountpoint> <type> <opts> <dump/pass>
/dev/sda3 / ext3 noatime 0 1
/dev/sda2 one swap sw 0 0
/dev/sda1 /boot ext2 defaults 0 0
shm /dev/shm tmpfs defaults 0 0
|
reboot to gentoo
as a quick check of our ability to write:
| Code: | echo "breath" > moose
cat moose
rm moose |
|
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Wed Nov 17, 2010 10:05 pm Post subject: |
|
|
That made something happen! Boot went a lot farther, I saw it trying to load wlan0, and logged in as localhost. ifconfig -a still shows just eth0, lo and sit0, with all zeros, but it seems as if the kernel is looking for the wireless. One place the screen paused was waiting for network, or broadcast, or something that seemed as if it was trying to find the network. The "echo/cat/ moose" went fine, showed "breath" and removed it.
Looks like this is getting closer! |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 12:08 am Post subject: |
|
|
Yahoo. boy do I feel stupid.
boot gentoo
| Code: | | nano /etc/portage/packages.license |
edit to include | Quote: | | net-wireless/rt73-firmware ralink-firmware |
| Code: | /etc/init.d/net.wlan0 stop
modprobe -r rt73usb
modprobe rt73usb
/etc/init.d/net.wlan0 start
dmesg tail # look for stuff about rt73
ifconfig -a # if wlan0 shows up:
iwlist scan # if wlan0 scans:
ping -c 2 8.8.8.8 # if ping returns
ping -c 2 google.com # if ping returns
emerge --sync # if syncs life is good
|
|
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 1:13 am Post subject: |
|
|
nano /etc/portage/packages.license was a blank file. I entered the ralink info anyway and exited, but I'm wondering if that's what I wanted. I'm used to seeing something besides a blank screen, as that generally means I'm in deep doo-doo.
modprobe -r rt73usb just returned a new line and a flashing cursor.
modprobe rt73usb returned: Fatal Error inserting rt73usb )/lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko)
Last edited by pottzie on Thu Nov 18, 2010 1:19 am; edited 1 time in total |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 1:19 am Post subject: |
|
|
all is good as long as no longer blank but net-wireless/rt73-firmware ralink-firmware instead  |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 1:26 am Post subject: |
|
|
ifconfig -a still shows just eth0, lo and sit0, but lo now shows internet address info. All zeros as far as packets go.
The rt73 did show up as dmesg tail ran. |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 1:47 am Post subject: |
|
|
unless you can identify the error in dmesg:
| Code: | modprobe rt73usb
dmesg tail > /root/dm.out |
reboot to cd
| Code: | sudo su --
mkdir /mnt/gentoo
mount /dev/sda3 /mnt/gentoo
wgetpaste /mnt/gentoo/var/log/dmesg
wgetpaste /mnt/gentoo/root/dm.out |
post url's |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 2:30 am Post subject: |
|
|
Didn't work. Maybe I need to be in chroot?
| Code: | ubuntu@ubuntu:~$ sudo su --
root@ubuntu:/home/ubuntu# mkdir /mnt/gentoo
root@ubuntu:/home/ubuntu# mount /dev/sda3 /mnt/gentoo
root@ubuntu:/home/ubuntu# wgetpaste /mnt/gentoo/var/log/dmesg
wgetpaste: command not found
root@ubuntu:/home/ubuntu# wgetpaste /mnt/gentoo/root/dm.out
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 4:44 am Post subject: |
|
|
sorry ubuntu does not have wgetpaste
browse to http://www.pastebin.ca and upload /mnt/gentoo/root/dm.out
browse to http://www.pastebin.ca and upload /mnt/gentoo/var/log/dmesg
post url's
while in ubuntu: ls -l /mnt/gentoo/lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
while in chroot or booted to gentoo: ls -l /lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
if it returns /lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko we know we have the file we told modprobe to use, |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 4:32 pm Post subject: |
|
|
As chroot: ("permission denied" when logged in as root)
| Code: | ubuntu / # /mnt/gentoo/root/dm.out
bash: /mnt/gentoo/root/dm.out: No such file or directory
ubuntu / # /mnt/gentoo/var/log/dmesg
bash: /mnt/gentoo/var/log/dmesg: No such file or directory
|
| Code: | ubuntu / # ls -l /lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
-rw-r--r-- 1 root root 35860 Nov 16 21:36 /lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
|
| Code: | root@ubuntu:/home/ubuntu# ls -l /mnt/gentoo/lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
-rw-r--r-- 1 root root 35860 2010-11-17 02:36 /mnt/gentoo/lib/modules/2.6.34-gentoo-r12/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 5:03 pm Post subject: |
|
|
boot ubuntu
| Code: | sudo su --
mkdir /mnt/gentoo
mount /dev/sda3 /mnt/gentoo |
start firefox
browse to: http://www.pastebin.ca/upload.php
under Upload File click choose file and run the file chooser dialog box to upload /mnt/gentoo/root/dm.out
under Upload File click choose file and run the file chooser dialog box to upload /mnt/gentoo/var/log/dmesg
also let us check firmare locations ubuntu vs gentoo
| Code: | find /lib/firmware -name rt73.bin #ubuntu
find /mnt/gentoo/lib/firmware -name rt73.bin # gentoo
|
| Quote: | | As chroot: ("permission denied" when logged in as root) |
The chroot procedure should not involve a login, You ran whoami to verify your username? |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 9:16 pm Post subject: |
|
|
The pastebin tries to find files in Ubuntu. When I try to "browse," it opens up the Ubuntu home directory, and waits for me to choose from Downloads, Documents, Music, Pictures, etc. I couldn't find a way to enter anything in the "find file to upload" box.
| Code: | ubuntu@ubuntu:~$ find /lib/firmware -name rt73.bin #ubuntu
/lib/firmware/rt73.bin
ubuntu@ubuntu:~$ find /mnt/gentoo/lib/firmware -name rt73.bin # gentoo
/mnt/gentoo/lib/firmware/rt73.bin
|
The "permission denied" bit came when I tried this:
| Code: | mount: /dev/sda3 already mounted or /mnt/gentoo busy
mount: according to mtab, /dev/sda3 is already mounted on /mnt/gentoo
root@ubuntu:/home/ubuntu# /mnt/gentoo/var/log/dmesg
bash: /mnt/gentoo/var/log/dmesg: Permission denied
root@ubuntu:/home/ubuntu# /mnt/gentoo/root/dm.out
bash: /mnt/gentoo/root/dm.out: Permission denied
root@ubuntu:/home/ubuntu# whoami
root
|
|
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 10:09 pm Post subject: |
|
|
forget the browse box (file system in column to the left of where you mention will get you into the filesystem)
instead at bottom of page type directly /mnt/gentoo/var/log/dmesg into the box under the line ending "You can use the form below to upload directly to Filebin.ca." |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
| Posted: Thu Nov 18, 2010 10:19 pm Post subject: |
|
|
Nope. I try to type anything into the "file to upload" box, and it hammers me with the Ubuntu Home Directory. I can click on the "x" to kill that, but when I go back to Pastebin and retry to enter the info, the Home Direcory pops up again. Can't kill it with a sledge hammer.
Tried to get wgetpaste from Ubuntu, but Synaptic doesn't show it. May be because of the live cd, I'll try doing it from another computer. |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Thu Nov 18, 2010 10:45 pm Post subject: |
|
|
| Quote: | | I try to type anything into the "file to upload" box, and it hammers me with the Ubuntu Home Directory. |
now it is doing that to me too.
so click in the bottom file upload window
in the browse file box that appears:
double click filesystem in the left column
double click mnt in the main (right) window
double click gentoo in the main window
double click filesystem in the left column
double click var in the main (right) window
double click log in the main (right) window
double click dmesg in the main (right) window
browse window should clear
click bottom upload |
|
| Back to top |
|
|
pottzie
Guru
Joined: 06 Nov 2010
Posts: 314
|
|
| Back to top |
|
|
|
Installing Gentoo
