Gentoo Forums :: View topic - lo & eth0 mess after update

lo & eth0 mess after update

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

Networking & Security

View previous topic :: View next topic

Author

Message

lo-jay
l33t
l33t

Joined: 27 Feb 2005
Posts: 862

Posted: Thu May 19, 2011 12:38 pm Post subject: lo & eth0 mess after update

ater a big & overdue update my lo & eth0 config seems to be kinda messed up:

here the relevant dmesg part, got net though

Code:

[ 70.699134] sky2 0000:07:00.0: eth0: enabling interface
[ 70.699583] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.212798] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 72.403646] sky2 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 72.403772] sky2 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 72.404109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 73.569246] Bluetooth: L2CAP ver 2.15
[ 73.569249] Bluetooth: L2CAP socket layer initialized
[ 73.586583] Bluetooth: RFCOMM TTY layer initialized
[ 73.586589] Bluetooth: RFCOMM socket layer initialized
[ 73.586591] Bluetooth: RFCOMM ver 1.11
[ 74.138762] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.035369] eth0: no IPv6 routers present
[ 108.992655] usb 2-1.2: link qh8-0601/ffff88011c96d000 start 2 [1/2 us]
[ 301.304054] kworker/u:0 used greatest stack depth: 3640 bytes left

where would i start diggin'?

cheers!
_________________
lo-jay

The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"

taken from "Two Lane Blacktop"

John R. Graham
Administrator

Joined: 08 Mar 2005
Posts: 10732
Location: Somewhere over Atlanta, Georgia

Posted: Thu May 19, 2011 1:10 pm Post subject:

Could you post the output of

Code:

ls /etc/init.d/net*

and

Code:

ifconfig

and

Code:

/etc/init.d/dhcpcd start

and, after that,

Code:

ifconfig

again, please?

Also, you just upgraded to baselayout-2 and openrc, right? Did you handle all of your config file updates with etc-update or dispatch-conf?

- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters.

lo-jay
l33t
l33t

Joined: 27 Feb 2005
Posts: 862

Posted: Thu May 19, 2011 1:18 pm Post subject:

Code:

ls /etc/init.d/net*

Code:

/etc/init.d/net.eth0 /etc/init.d/net.lo /etc/init.d/netmount /etc/init.d/network

Code:

ifconfig

Code:

# ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:54:8b:55:80
inet addr:192.168.1.146 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:54ff:fe8b:5580/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5510 errors:0 dropped:0 overruns:0 frame:0
TX packets:5557 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4186069 (3.9 MiB) TX bytes:989793 (966.5 KiB)
Interrupt:19

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wlan0 Link encap:Ethernet HWaddr 18:f4:6a:37:1f:bd
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Code:

ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:54:8b:55:80
inet addr:192.168.1.146 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:54ff:fe8b:5580/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5525 errors:0 dropped:0 overruns:0 frame:0
TX packets:5575 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4188495 (3.9 MiB) TX bytes:991626 (968.3 KiB)
Interrupt:19

gre0 Link encap:UNSPEC HWaddr 00-00-00-00-FF-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::192.168.1.146/96 Scope:Compat
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

tunl0 Link encap:IPIP Tunnel HWaddr
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wlan0 Link encap:Ethernet HWaddr 18:f4:6a:37:1f:bd
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

yes - did an etc-update, not sure so if i always choose the right options...

cheers again!
_________________
lo-jay

The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"

taken from "Two Lane Blacktop"

John R. Graham
Administrator

Joined: 08 Mar 2005
Posts: 10732
Location: Somewhere over Atlanta, Georgia

Posted: Thu May 19, 2011 1:54 pm Post subject:

This looks pretty normal. What exactly isn't working? - John _________________ I can confirm that I have received between 0 and 499 National Security Letters.

lo-jay
l33t
l33t

Joined: 27 Feb 2005
Posts: 862

Posted: Thu May 19, 2011 2:28 pm Post subject:

well, i get

Code:

ERROR net.eth0 failed to start

& the boot-up takes too long...

cheers again!

EDIT: this seems to ntpd related, opened another post:

https://forums.gentoo.org/viewtopic-t-879043-highlight-.html
_________________
lo-jay

The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"

taken from "Two Lane Blacktop"

Display posts from previous:

	Gentoo Forums Forum Index Networking & Security	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy