| View previous topic :: View next topic |
| Author |
Message |
ceyes
n00b
Joined: 13 Aug 2011
Posts: 18
Location: China
|
 Posted: Tue Dec 27, 2011 2:53 am Post subject: there's no reaction when I connect my android phone via USB |
 |
|
hello
I met a problem
my linux kernel is complied by myself , the kernel works well since I found it can't recgnize my phone
when I connect it via USB
my phone is Sony Ericsson st18i
in a normal situation is When you connect an Android phone to your PC, it will usually ask you in what mode it should appear to the PC (charge only, disk drive, USB tethering, …).
but when I connect my phone to my gentoo ,my phone gives no reaction, it just charges.
and on my gentoo , I also can't found the USB device (use lsusb)
I think there is some wrong in my kernel ,I should recompile it
but I realy don't know which option should be choosed
who can help me
below was /var/log/message when I connect my phone to gentoo
| Code: |
Dec 26 18:12:27 gentoo klogd: [21543.839031] usb 1-3: new high speed USB device number 15 using ehci_hcd
Dec 26 18:12:28 gentoo klogd: [21543.953957] usb 1-3: Dual-Role OTG device on non-HNP port
Dec 26 18:12:28 gentoo klogd: [21543.954304] usb 1-3: can't set HNP mode: -32
Dec 26 18:12:28 gentoo klogd: [21544.056064] usb 1-3: new high speed USB device number 16 using ehci_hcd
Dec 26 18:12:28 gentoo klogd: [21544.170963] usb 1-3: Dual-Role OTG device on non-HNP port
Dec 26 18:12:28 gentoo klogd: [21544.171126] usb 1-3: can't set HNP mode: -32
Dec 26 18:12:28 gentoo klogd: [21544.274068] usb 1-3: new high speed USB device number 17 using ehci_hcd
Dec 26 18:12:28 gentoo klogd: [21544.287099] usb 1-3: Dual-Role OTG device on non-HNP port
Dec 26 18:12:28 gentoo klogd: [21544.287211] usb 1-3: can't set HNP mode: -32
Dec 26 18:12:28 gentoo klogd: [21544.390066] usb 1-3: new high speed USB device number 18 using ehci_hcd
Dec 26 18:12:28 gentoo klogd: [21544.403458] usb 1-3: Dual-Role OTG device on non-HNP port
Dec 26 18:12:28 gentoo klogd: [21544.403590] usb 1-3: can't set HNP mode: -32
Dec 26 18:12:28 gentoo klogd: [21544.622037] usb 4-1: new full speed USB device number 14 using uhci_hcd
Dec 26 18:12:28 gentoo klogd: [21544.749077] usb 4-1: not running at top speed; connect to a high speed hub
Dec 26 18:12:28 gentoo klogd: [21544.777081] usb 4-1: Dual-Role OTG device on non-HNP port
Dec 26 18:12:28 gentoo klogd: [21544.779099] usb 4-1: can't set HNP mode: -32
Dec 26 18:12:28 gentoo klogd: [21544.933059] usb 4-1: new full speed USB device number 15 using uhci_hcd
Dec 26 18:12:29 gentoo klogd: [21545.115085] usb 4-1: not running at top speed; connect to a high speed hub
Dec 26 18:12:29 gentoo klogd: [21545.143089] usb 4-1: Dual-Role OTG device on non-HNP port
Dec 26 18:12:29 gentoo klogd: [21545.146224] usb 4-1: can't set HNP mode: -32
Dec 26 18:12:29 gentoo klogd: [21545.249030] usb 4-1: new full speed USB device number 16 using uhci_hcd
Dec 26 18:12:29 gentoo klogd: [21545.276121] usb 4-1: not running at top speed; connect to a high speed hub
Dec 26 18:12:29 gentoo klogd: [21545.304078] usb 4-1: Dual-Role OTG device on non-HNP port
Dec 26 18:12:29 gentoo klogd: [21545.307085] usb 4-1: can't set HNP mode: -32
Dec 26 18:12:29 gentoo klogd: [21545.461045] usb 4-1: new full speed USB device number 17 using uhci_hcd
Dec 26 18:12:29 gentoo klogd: [21545.488084] usb 4-1: not running at top speed; connect to a high speed hub
Dec 26 18:12:29 gentoo klogd: [21545.515293] usb 4-1: Dual-Role OTG device on non-HNP port
Dec 26 18:12:29 gentoo klogd: [21545.518089] usb 4-1: can't set HNP mode: -32 |
|
|
| Back to top |
|
 |
forrestfunk81
Guru
Joined: 07 Feb 2006
Posts: 567
Location: münchen.de
|
| Posted: Tue Dec 27, 2011 11:32 am Post subject: |
|
|
Device Drivers ---> SCSI device suport -->
<*> SCSI disk support
<*> SCSI generic support
<*> SCSI media changer support
<*> Probe all LUNs on each SCSI device
Device Drivers ---> USB support --->
EHCI, OHCI, and UHCI stuff depending on your USB hardware.
Iirc USB Debugging (Android Settings, Applications, Development) must be enabled.
_________________
# cd /pub/
# more beer |
|
| Back to top |
|
|
ceyes
n00b
Joined: 13 Aug 2011
Posts: 18
Location: China
|
| Posted: Wed Dec 28, 2011 2:49 am Post subject: |
|
|
| forrestfunk81 wrote: | Device Drivers ---> SCSI device suport -->
<*> SCSI disk support
<*> SCSI generic support
<*> SCSI media changer support
<*> Probe all LUNs on each SCSI device
Device Drivers ---> USB support --->
EHCI, OHCI, and UHCI stuff depending on your USB hardware.
Iirc USB Debugging (Android Settings, Applications, Development) must be enabled. |
thanks for your kindness
but all that you said I have done before
my other USB devices all work well at my gentoo
only this phone have problem
and here is the dmesg relative to it
| Code: | [ 578.554890] usb usb1: usb wakeup-resume
[ 578.554896] usb usb1: usb auto-resume
[ 578.554900] ehci_hcd 0000:00:1a.7: resume root hub
[ 578.574109] hub 1-0:1.0: hub_resume
[ 578.574132] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 578.574138] hub 1-0:1.0: port 3: status 0501 change 0001
[ 578.675126] hub 1-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 578.675140] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 578.726307] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 578.726313] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 578.777129] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 578.828310] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 578.828316] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 578.891471] usb 1-3: skipped 1 descriptor after configuration
[ 578.891593] usb 1-3: default language 0x0409
[ 578.891967] usb 1-3: Dual-Role OTG device on non-HNP port
[ 578.892086] usb 1-3: can't set HNP mode: -32
[ 578.944313] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 578.944323] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 578.995131] usb 1-3: new high speed USB device number 3 using ehci_hcd
[ 579.046310] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 579.046316] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 579.109470] usb 1-3: skipped 1 descriptor after configuration
[ 579.109593] usb 1-3: default language 0x0409
[ 579.109967] usb 1-3: Dual-Role OTG device on non-HNP port
[ 579.110172] usb 1-3: can't set HNP mode: -32
[ 579.162308] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 579.162313] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 579.213130] usb 1-3: new high speed USB device number 4 using ehci_hcd
[ 579.225719] usb 1-3: skipped 1 descriptor after configuration
[ 579.225843] usb 1-3: default language 0x0409
[ 579.226201] usb 1-3: Dual-Role OTG device on non-HNP port
[ 579.226339] usb 1-3: can't set HNP mode: -32
[ 579.278432] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 579.278437] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 579.329132] usb 1-3: new high speed USB device number 5 using ehci_hcd
[ 579.341594] usb 1-3: skipped 1 descriptor after configuration
[ 579.341718] usb 1-3: default language 0x0409
[ 579.342089] usb 1-3: Dual-Role OTG device on non-HNP port
[ 579.342212] usb 1-3: can't set HNP mode: -32
[ 579.343028] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 579.349113] usb usb4: usb wakeup-resume
[ 579.349120] usb usb4: usb auto-resume
[ 579.349125] usb usb4: wakeup_rh
[ 579.355077] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 579.355091] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 579.355103] hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[ 579.381041] hub 4-0:1.0: hub_resume
[ 579.381054] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00
[ 579.381061] hub 4-0:1.0: port 1: status 0101 change 0001
[ 579.459087] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[ 579.482083] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 579.482100] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 579.584087] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 579.713086] usb 4-1: not running at top speed; connect to a high speed hub
[ 579.720088] usb 4-1: skipped 1 descriptor after configuration
[ 579.725087] usb 4-1: default language 0x0409
[ 579.740066] usb 4-1: Dual-Role OTG device on non-HNP port
[ 579.742085] usb 4-1: can't set HNP mode: -32
[ 579.845028] usb 4-1: new full speed USB device number 3 using uhci_hcd
[ 579.973089] usb 4-1: not running at top speed; connect to a high speed hub
[ 579.980088] usb 4-1: skipped 1 descriptor after configuration
[ 579.985077] usb 4-1: default language 0x0409
[ 580.000057] usb 4-1: Dual-Role OTG device on non-HNP port
[ 580.003088] usb 4-1: can't set HNP mode: -32
[ 580.106083] usb 4-1: new full speed USB device number 4 using uhci_hcd
[ 580.133086] usb 4-1: not running at top speed; connect to a high speed hub
[ 580.140078] usb 4-1: skipped 1 descriptor after configuration
[ 580.143087] usb 4-1: default language 0x0409
[ 580.158088] usb 4-1: Dual-Role OTG device on non-HNP port
[ 580.160084] usb 4-1: can't set HNP mode: -32
[ 580.263059] usb 4-1: new full speed USB device number 5 using uhci_hcd
[ 580.290085] usb 4-1: not running at top speed; connect to a high speed hub
[ 580.297088] usb 4-1: skipped 1 descriptor after configuration
[ 580.302086] usb 4-1: default language 0x0409
[ 580.317082] usb 4-1: Dual-Role OTG device on non-HNP port
[ 580.320088] usb 4-1: can't set HNP mode: -32
[ 580.321119] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 582.002022] hub 1-0:1.0: hub_suspend
[ 582.002031] usb usb1: bus auto-suspend
[ 582.002033] ehci_hcd 0000:00:1a.7: suspend root hub
[ 583.002059] hub 4-0:1.0: hub_suspend
[ 583.002068] usb usb4: bus auto-suspend
[ 583.002071] usb usb4: suspend_rh
|
|
|
| Back to top |
|
|
dE_logics
Advocate
Joined: 02 Jan 2009
Posts: 2289
Location: $TERM
|
| Posted: Sat Feb 25, 2012 3:47 pm Post subject: |
|
|
This's a bug with Android which I'm also suffering from.
_________________
My blog |
|
| Back to top |
|
|
d_u_s_t
n00b
Joined: 11 Jul 2006
Posts: 8
Location: Berlin
|
| Posted: Sat May 12, 2012 12:19 am Post subject: |
|
|
I can't find any resources about this Android Bug, but to provide workarounds:
- Unset OTG in kernel config (under USB support) and compile a new kernel. There is no other way to fix this OTF.
OR
- Use a USB Hub. OTG only works on "direct" connections between a device and the root hub. If there is something in between HNP isn't called.
Hope that helps future visitors of this page!
_________________
Bettdeckenentzug ist kalter Entzug! -- dustbln |
|
| Back to top |
|
|
dE_logics
Advocate
Joined: 02 Jan 2009
Posts: 2289
Location: $TERM
|
| Posted: Tue May 15, 2012 8:58 am Post subject: |
|
|
| d_u_s_t wrote: | I can't find any resources about this Android Bug, but to provide workarounds:
- Unset OTG in kernel config (under USB support) and compile a new kernel. There is no other way to fix this OTF.
OR
- Use a USB Hub. OTG only works on "direct" connections between a device and the root hub. If there is something in between HNP isn't called.
Hope that helps future visitors of this page! |
It persists in Windows also.
Guess what, after I removed cleaned and reinserted the SDcard, everything was ok.
_________________
My blog |
|
| Back to top |
|
|
ceyes
n00b
Joined: 13 Aug 2011
Posts: 18
Location: China
|
| Posted: Wed May 30, 2012 8:39 am Post subject: |
|
|
| d_u_s_t wrote: | I can't find any resources about this Android Bug, but to provide workarounds:
- Unset OTG in kernel config (under USB support) and compile a new kernel. There is no other way to fix this OTF.
OR
- Use a USB Hub. OTG only works on "direct" connections between a device and the root hub. If there is something in between HNP isn't called.
Hope that helps future visitors of this page! |
I just tried as you said
now it works normally
Thank you very much |
|
| Back to top |
|
|
|
Kernel & Hardware
