Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Compiling U-Boot for beaglebone on Gentoo (arm7a) fails...
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
mcc2
n00b
n00b


Joined: 06 Sep 2012
Posts: 25

PostPosted: Thu Sep 06, 2012 10:33 pm    Post subject: Compiling U-Boot for beaglebone on Gentoo (arm7a) fails... Reply with quote

Hi,

I am trying U-Boot from git by myself and followed this
http://dev.gentoo.org/~armin76/arm/beaglebone/install.xml
instructions.

The compilation fails with:

armv7a-unknown-linux-gnueabi-gcc -E -g -Os -fno-common -ffixed-r8
-msoft-float -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x80100000
-DCONFIG_SPL_TEXT_BASE=0x402F0400
-I/home/mccramer/data/pools/pool01/BEAGLEBONE-GENTOO/U-BOOT/u-boot-am33x/include
-fno-builtin -ffreestanding -nostdinc -isystem
/usr/lib/gcc/armv7a-unknown-linux-gnueabi/4.6.3/include -pipe -DCONFIG_ARM
-D__ARM__ -march=armv5 -include
/home/mccramer/data/pools/pool01/BEAGLEBONE-GENTOO/U-BOOT/u-boot-am33x/include/u-boot/u-boot.lds.h
-ansi -D__ASSEMBLY__ -P -
</home/mccramer/data/pools/pool01/BEAGLEBONE-GENTOO/U-BOOT/u-boot-am33x/arch/arm/cpu/armv7/u-boot.lds
>u-boot.lds
UNDEF_SYM=`armv7a-unknown-linux-gnueabi-objdump -x
board/ti/am335x/libam335x.o api/libapi.o arch/arm/cpu/armv7/libarmv7.o
arch/arm/cpu/armv7/omap-common/libomap-common.o
arch/arm/cpu/armv7/ti81xx/libti81xx.o arch/arm/lib/libarm.o
common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o
drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o
drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o
drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o
drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o
drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o
drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o
drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o
drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o
drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb-new/libusb_musb-new.o drivers/usb/musb/libusb_musb.o
drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o
drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o
fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o
fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o
lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o
lib/zlib/libz.o net/libnet.o post/libpost.o | sed -n -e
's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`; cd
/home/mccramer/data/pools/pool01/BEAGLEBONE-GENTOO/U-BOOT/u-boot-am33x &&
armv7a-unknown-linux-gnueabi-ld -pie -T u-boot.lds -Bstatic -Ttext
0x80100000 $UNDEF_SYM arch/arm/cpu/armv7/start.o --start-group api/libapi.o
arch/arm/cpu/armv7/libarmv7.o
arch/arm/cpu/armv7/omap-common/libomap-common.o
arch/arm/cpu/armv7/ti81xx/libti81xx.o arch/arm/lib/libarm.o
common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o
drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o
drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o
drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o
drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o
drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o
drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o
drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o
drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o
drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb-new/libusb_musb-new.o drivers/usb/musb/libusb_musb.o
drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o
drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o
fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o
fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o
lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o
lib/zlib/libz.o net/libnet.o post/libpost.o board/ti/am335x/libam335x.o
--end-group -L /usr/lib/gcc/armv7a-unknown-linux-gnueabi/4.6.3 -lgcc -Map
u-boot.map -o u-boot
/usr/lib/gcc/armv7a-unknown-linux-gnueabi/4.6.3/libgcc.a(_dvmd_lnx.o): In
function `__aeabi_ldiv0':
(.text+0x8): undefined reference to `raise'
armv7a-unknown-linux-gnueabi-ld: BFD (GNU Binutils) 2.22.90.20120727
assertion fail
/var/tmp/portage/cross-armv7a-unknown-linux-gnueabi/binutils-2.22.90/work/binutils-2.22.90/bfd/elf32-arm.c:7677

armv7a-unknown-linux-gnueabi-ld: error: required section '.rel.plt' not
found in the linker script
armv7a-unknown-linux-gnueabi-ld: final link failed: Invalid operation
make: *** [u-boot] Error 1
[1] 18806 exit 2 make -j1 ARCH=arm
CROSS_COMPILE=armv7a-unknown-linux-gnueabi-


...seems to be the final step.

If this is only a temporary bug cause the git conatins some buggy
code...no problem.
If I did something wrong or be able to fix it I would like to know,
what goes wrong...?!?
How can I get/create this ".rel.plt" file ?

Thank you very much in advance for any help !
Best regards,
mcc
Back to top
View user's profile Send private message
jlpoole
Guru
Guru


Joined: 01 Nov 2005
Posts: 489
Location: Salem, OR

PostPosted: Fri Sep 07, 2012 2:25 am    Post subject: Reply with quote

What the hash of your pull? If it's not the same as below, then try the version below which I recently successfully cross compiled:


Code:
commit 5c0406ddff69cd0b3d5271ba5cd98b44eac39c6e
Author: Joel A Fernandes <[xxx]@ti.com>
Date:   Thu Aug 9 10:45:09 2012 -0400

    AM33XX: boot commands for booting from emmc on mmc1

    Signed-off-by: Joel A Fernandes <[xxx]@ti.com>


Here's my version of crossdev:
Code:
[I] sys-devel/crossdev
     Available versions:  20100814 20101011 20110310 20110705 20110819 ~20111011 20111018 20111118 20111221 ~20120214 ~20120227 ~20120228 ~20120229 ~20120301 20120305 ~20120529 20120531 20120721 **99999999
     Installed versions:  20120721(10:20:55 08/24/12)
     Homepage:            http://www.gentoo.org/
     Description:         Gentoo Cross-toolchain generator
Back to top
View user's profile Send private message
mcc2
n00b
n00b


Joined: 06 Sep 2012
Posts: 25

PostPosted: Fri Sep 07, 2012 2:47 am    Post subject: Reply with quote

Hi,

mine is:

[code][I] sys-devel/crossdev
Available versions: 20100814 20101011 20110310 20110705 20110819 ~20111011 20111018 20111118 20111221 ~20120214 ~20120227 ~20120228 ~20120229 ~20120301 20120305 ~20120529 20120531 20120721 **99999999
Installed versions: 20120721(17:01:24 08/20/12)
Homepage: http://www.gentoo.org/
Description: Gentoo Cross-toolchain generator[/code]

from eix point of view it is the same version...

Seems I am out of luck...what can I do next?
Best regards,
mcc
Back to top
View user's profile Send private message
jlpoole
Guru
Guru


Joined: 01 Nov 2005
Posts: 489
Location: Salem, OR

PostPosted: Fri Sep 07, 2012 3:11 am    Post subject: Reply with quote

Just so where closer to apples to apples, would you post the results of:
Code:
.../u-boot-am33x $ git log -1
Back to top
View user's profile Send private message
mcc2
n00b
n00b


Joined: 06 Sep 2012
Posts: 25

PostPosted: Fri Sep 07, 2012 3:54 pm    Post subject: Reply with quote

Hi jlpoole,

this is the output:

commit 00a64fc1dae7654dbba7c4b1cdba51b557f154fa
Author: Ilya Yanok <ilya.yanok@cogentembedded.com>
Date: Thu Aug 9 02:10:14 2012 +0400

usb-spl: add hack to load SPL via serial

Just for testing.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>

(unfortunately I am no git-guru yet...)

Best regards,
mcc
Back to top
View user's profile Send private message
jlpoole
Guru
Guru


Joined: 01 Nov 2005
Posts: 489
Location: Salem, OR

PostPosted: Fri Sep 07, 2012 4:04 pm    Post subject: Reply with quote

Try reverting to the version I used and then attempt to compile; the version you have may very well be broken especially since the author noted it was "testing". You'll have to read up on the basics of GIT.
Back to top
View user's profile Send private message
mcc2
n00b
n00b


Joined: 06 Sep 2012
Posts: 25

PostPosted: Fri Sep 07, 2012 4:20 pm    Post subject: Reply with quote

Hi jlpoole,

git log -1 now produces

commit 5c0406ddff69cd0b3d5271ba5cd98b44eac39c6e
Author: Joel A Fernandes <joelagnel@ti.com>
Date: Thu Aug 9 10:45:09 2012 -0400

AM33XX: boot commands for booting from emmc on mmc1

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>

here, but unfortunately the error remains the same...

Any idea, what to try else...?

(with the toolchain I compiled a complete Angstrom image
(rootfs,xfree,windowmanager) so dont think, it is buggy...)


Best regards,
mcc
Back to top
View user's profile Send private message
jlpoole
Guru
Guru


Joined: 01 Nov 2005
Posts: 489
Location: Salem, OR

PostPosted: Sat Sep 08, 2012 6:46 am    Post subject: Reply with quote

My ineptitude with git did not allow me to modify my existing tree, so I started anew and downloaded a fresh image and configured and cross compiled it. It did not appear that the compile successfully ended; however, the u-boot was generated so I'm not arguing with success.

The session (less the entire make.log) can be viewed for the next month at: http://pastebin.com/9P3m6S19

The salient points from my session are:
Code:
git clone git://arago-project.org/git/projects/u-boot-am33x.git
...
make ARCH=arm CROSS_COMPILE=armv7a-unknown-linux-gnueabi- am335x_evm_config
...
make ARCH=arm CROSS_COMPILE=armv7a-unknown-linux-gnueabi- >my_make.log
...
armv7a-unknown-linux-gnueabi-ld: u-boot-spl section `.data' will not fit in region `.sram'
armv7a-unknown-linux-gnueabi-ld: region `.sram' overflowed by 171 bytes
make[1]: *** [/usr/local/src/beagle/u-boot-am33x/spl/u-boot-spl] Error 1
make: *** [spl/u-boot-spl.bin] Error 2
...
hermes u-boot-am33x # ls -la
...
-rwxr-xr-x   1 root root 1147822 Sep  7 23:22 u-boot


The version I pulled this time (which differs from my previous one) is:
Quote:
commit 00a64fc1dae7654dbba7c4b1cdba51b557f154fa
Author: Ilya Yanok <ilya.yanok@cogentembedded.com>
Date: Thu Aug 9 02:10:14 2012 +0400

usb-spl: add hack to load SPL via serial

Just for testing.


Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>


It's possible that before I had errors, but that the u-boot had been built so I ran with it discarding any concern for the fact that the make may not have successfully finished. Sloppy, but I moved forward.
Back to top
View user's profile Send private message
jlpoole
Guru
Guru


Joined: 01 Nov 2005
Posts: 489
Location: Salem, OR

PostPosted: Sat Sep 08, 2012 6:54 am    Post subject: Reply with quote

The error generated from my cross compile against the Yanok commit of Thu Aug 9 02:10:14 2012 differ than the errors at the start of this post.

Question: was u-boot built? My errors seem to appear after-the-build. I'm assuming yours were before u-boot was built.

At any rate, if you do not have u-boot, then kindly replicate what I just did using the Yanok version and paste-bin, then let's ask Mark Frysinger [Vapier] what he thinks we can do to ferret out the discrepancy. The cross compiler should give us the same error messages when run against the same source; that it does not merits investigation and possibly a bug.
Back to top
View user's profile Send private message
armin76
Retired Dev
Retired Dev


Joined: 24 Apr 2006
Posts: 174

PostPosted: Fri Oct 12, 2012 5:12 pm    Post subject: Reply with quote

Hi all,

I've updated my guide for installing the beaglebone, with all the issues fixed like the u-boot build failures that like you, i also hit...

Hope it helps.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum