| View previous topic :: View next topic |
| Author |
Message |
jeffk
l33t
Joined: 13 Sep 2003
Posts: 671
|
 Posted: Sun Feb 17, 2013 7:58 pm Post subject: linux-firmware savedconfig: what is config file syntax? |
 |
|
In response to portage message:
| Code: | : - sys-firmware/iwl4965-ucode-228.61.2.24::gentoo (masked by: package.mask)
: /usr/portage/profiles/package.mask:
: # Rick Farina <zerochaos@gentoo.org> (15 Feb 2013)
: # these firmware packages have been merged into the sys-kernel/linux-firmware
: # package. USE=savedconfig can be used to limit the firmware which gets installed.
: # removal on 18 March 2013 |
Remove sys-firmware/iwl4965-ucode-228.61.2.24, attempt to emerge linux-firmware:
| Code: | : [ebuild N ] sys-kernel/linux-firmware-20130113 USE="-savedconfig" 18,155 kB
: [blocks B ] sys-firmware/iwl4965-ucode ("sys-firmware/iwl4965-ucode" is blocking sys-kernel/linux-firmware-20130113)
: [blocks B ] sys-firmware/iwl1000-ucode ("sys-firmware/iwl1000-ucode" is blocking sys-kernel/linux-firmware-20130113)
: [blocks B ] sys-firmware/iwl6050-ucode ("sys-firmware/iwl6050-ucode" is blocking sys-kernel/linux-firmware-20130113)
: [blocks B ] sys-firmware/iwl6000-ucode ("sys-firmware/iwl6000-ucode" is blocking sys-kernel/linux-firmware-20130113)
: Total: 1 package (1 new), Size of downloads: 18,155 kB
: Conflict: 4 blocks (4 unsatisfied)
:
: * Error: The above package list contains packages which cannot be
: * installed at the same time on the same system.
:
: (sys-firmware/iwl1000-ucode-39.31.5.1::gentoo, installed) pulled in by
: sys-firmware/iwl1000-ucode required by @selected
:
: (sys-firmware/iwl6000-ucode-9.221.4.1::gentoo, installed) pulled in by
: sys-firmware/iwl6000-ucode required by @selected
:
: (sys-kernel/linux-firmware-20130113::gentoo, ebuild scheduled for merge) pulled in by
: linux-firmware
:
: (sys-firmware/iwl4965-ucode-228.61.2.24::gentoo, installed) pulled in by
: sys-firmware/iwl4965-ucode required by @selected
:
: (sys-firmware/iwl6050-ucode-41.28.5.1::gentoo, installed) pulled in by
: sys-firmware/iwl6050-ucode required by @selected |
Add linux-firmware savedconfig entry to portage package.use Go ahead with attempt:
| Code: | : Failed to install sys-kernel/linux-firmware-20130113, Log file:
: '/var/tmp/portage/sys-kernel/linux-firmware-20130113/temp/build.log'
: Messages for package sys-kernel/linux-firmware-20130113:
: No saved config to restore - please remove USE=savedconfig or
: provide a configuration file in //etc/portage/savedconfig/sys-kernel/linux-firmware
: Your config file(s) will not be used this time
: Your configuration for sys-kernel/linux-firmware-20130113 has been saved in
: /etc/portage/savedconfig/sys-kernel/linux-firmware-20130113 for your editing pleasure.
: You can edit these files by hand and remerge this package with
: USE=savedconfig to customise the configuration.
: You can rename this file/directory to one of the following for
: its configuration to apply to multiple versions:
: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
: [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
:
: package sys-kernel/linux-firmware-20130113 NOT merged
:
: Detected file collision(s):
:
: /lib/firmware/iwlwifi-1000-5.ucode
: /lib/firmware/whiteheat_loader.fw
: /lib/firmware/iwlwifi-6000-4.ucode
: /lib/firmware/iwlwifi-6050-5.ucode
: /lib/firmware/whiteheat.fw
: /lib/firmware/iwlwifi-4965-2.ucode
: /lib/firmware/korg/k1212.dsp
: /lib/firmware/radeon/RV710_pfp.bin
: /lib/firmware/radeon/R420_cp.bin
: /lib/firmware/radeon/RV620_me.bin
: /lib/firmware/radeon/RV670_pfp.bin
: /lib/firmware/radeon/RV635_pfp.bin
: /lib/firmware/radeon/RS780_me.bin
: /lib/firmware/radeon/RV770_me.bin
: /lib/firmware/radeon/RV620_pfp.bin
: /lib/firmware/radeon/R600_pfp.bin
: /lib/firmware/radeon/RV610_me.bin
: /lib/firmware/radeon/RS690_cp.bin
: /lib/firmware/radeon/RV670_me.bin
: /lib/firmware/radeon/RS600_cp.bin
: /lib/firmware/radeon/RV730_pfp.bin
: /lib/firmware/radeon/RV770_pfp.bin
: /lib/firmware/radeon/RV630_me.bin
: /lib/firmware/radeon/RV630_pfp.bin
: /lib/firmware/radeon/RS780_pfp.bin
: /lib/firmware/radeon/R600_me.bin
: /lib/firmware/radeon/R520_cp.bin
: /lib/firmware/radeon/RV730_me.bin
: /lib/firmware/radeon/R200_cp.bin
: /lib/firmware/radeon/RV710_me.bin
: /lib/firmware/radeon/R300_cp.bin
: /lib/firmware/radeon/RV635_me.bin
: /lib/firmware/radeon/RV610_pfp.bin
: /lib/firmware/radeon/R100_cp.bin
: /lib/firmware/ess/maestro3_assp_minisrc.fw
: /lib/firmware/ess/maestro3_assp_kernel.fw
: /lib/firmware/yamaha/ds1_ctrl.fw
: /lib/firmware/yamaha/ds1_dsp.fw
: /lib/firmware/yamaha/ds1e_ctrl.fw
: /lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw
: /lib/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw
: /lib/firmware/cis/COMpad2.cis
: /lib/firmware/cis/SW_555_SER.cis
: /lib/firmware/kaweth/new_code_fix.bin
: /lib/firmware/kaweth/trigger_code_fix.bin
: /lib/firmware/kaweth/new_code.bin
: /lib/firmware/kaweth/trigger_code.bin
: /lib/firmware/matrox/g400_warp.fw
: /lib/firmware/matrox/g200_warp.fw
: /lib/firmware/r128/r128_cce.bin
: /lib/firmware/cxgb3/t3b_psram-1.1.0.bin
: /lib/firmware/cxgb3/t3fw-7.1.0.bin
: /lib/firmware/cxgb3/ael2020_twx_edc.bin
: /lib/firmware/cxgb3/ael2005_twx_edc.bin
: /lib/firmware/cxgb3/t3fw-7.4.0.bin
: /lib/firmware/cxgb3/ael2005_opt_edc.bin
: /lib/firmware/cxgb3/t3c_psram-1.1.0.bin
: /lib/firmware/cxgb3/t3fw-7.10.0.bin
: /lib/firmware/ositech/Xilinx7OD.bin
: /lib/firmware/ttusb-budget/dspbootcode.bin
:
: Searching all installed packages for file collisions...
:
: sys-firmware/iwl4965-ucode-228.61.2.24:1::gentoo
: /lib/firmware/iwlwifi-4965-2.ucode
:
: sys-firmware/iwl1000-ucode-39.31.5.1:0::gentoo
: /lib/firmware/iwlwifi-1000-5.ucode
:
: sys-firmware/iwl6000-ucode-9.221.4.1:0::gentoo
: /lib/firmware/iwlwifi-6000-4.ucode
:
: sys-firmware/iwl6050-ucode-41.28.5.1:0::gentoo
: /lib/firmware/iwlwifi-6050-5.ucode
:
: Package 'sys-kernel/linux-firmware-20130113' NOT merged due to file
: collisions. If necessary, refer to your elog messages for the whole
: content of the above message. |
Contrary to the message output, there is no file at /etc/portage/savedconfig/sys-kernel/linux-firmware-20130113 .
So what syntax is supposed to go in that config file, and what is the generic (not 20130113 versioned) name and path it must use?
I do need isl49465 firmware. I don't have any other firmware requirements that I am aware of on this Lenovo Thinkpad x201.
Thanks. |
|
| Back to top |
|
 |
Fitzcarraldo
Advocate
Joined: 30 Aug 2008
Posts: 2056
Location: United Kingdom
|
| Posted: Sun Feb 17, 2013 8:05 pm Post subject: |
|
|
In case it is of help: How to install the linux-firmware package in Gentoo.
_________________
Clevo W230SS: amd64, VIDEO_CARDS="intel modesetting nvidia".
Compal NBLB2: ~amd64, xf86-video-ati. Dual boot Win 7 Pro 64-bit.
OpenRC systemd-utils[udev] elogind KDE on both.
My blog |
|
| Back to top |
|
|
Punchcutter
Guru
Joined: 11 Feb 2007
Posts: 363
|
| Posted: Mon Mar 04, 2013 2:18 am Post subject: |
|
|
Thanks, Fitzcarraldo, that's helpful, and I think I got it set up correctly now.
Now, my next question (for someone) is: Why is the savedconfig file named with the date/version of linux-firmware included in it? Does this mean that when that package is updated and the date changes, the next time I upgrade the package, the savedconfig file will be ignored and I'll unknowingly install the entire set of linux firmware (until I accidentally discover the mistake much later)??
I experimented by changing the name of the config file to just "linux-firmware", but it was apparently ignored by portage. This whole thing is astoundingly poorly documented, even for Gentoo  |
|
| Back to top |
|
|
Fitzcarraldo
Advocate
Joined: 30 Aug 2008
Posts: 2056
Location: United Kingdom
|
| Posted: Mon Mar 04, 2013 5:31 am Post subject: |
|
|
| Punchcutter wrote: | | Why is the savedconfig file named with the date/version of linux-firmware included in it? Does this mean that when that package is updated and the date changes, the next time I upgrade the package, the savedconfig file will be ignored and I'll unknowingly install the entire set of linux firmware (until I accidentally discover the mistake much later)?? |
Yes, it does mean that. I suppose the file name contains the date/version because the list of the devices for which firmware is included in each version of the linux-firmware package can change, so the savedconfig file has to be tied to the version of the linux-firmware package.
_________________
Clevo W230SS: amd64, VIDEO_CARDS="intel modesetting nvidia".
Compal NBLB2: ~amd64, xf86-video-ati. Dual boot Win 7 Pro 64-bit.
OpenRC systemd-utils[udev] elogind KDE on both.
My blog |
|
| Back to top |
|
|
bstaletic
Guru
Joined: 05 Apr 2014
Posts: 463
|
| Posted: Thu Jun 30, 2016 10:37 pm Post subject: |
|
|
| Savedconfig files are versioned by default, but you can rename them and they will apply to all versions. It's, in a way, similar to package.* dirs/files. |
|
| Back to top |
|
|
hariskar
Apprentice
Joined: 29 Jan 2017
Posts: 170
|
| Posted: Sun Dec 10, 2017 4:08 pm Post subject: |
|
|
| Although I install sys-kernel/linux-firmware with savedconfig USE flag, I can't find a savedconfig file in /etc/portage/savedconfig. Any idea why? |
|
| Back to top |
|
|
freedomeagle1967
n00b
Joined: 26 Aug 2007
Posts: 52
Location: Minnesota
|
| Posted: Thu Feb 01, 2018 5:24 am Post subject: |
|
|
hariskar
| Quote: | | Although I install sys-kernel/linux-firmware with savedconfig USE flag, I can't find a savedconfig file in /etc/portage/savedconfig. Any idea why? |
Not sure, possible bug:
| Code: | | USE="-savedconfig" emerge linux-firmware |
then you can find:
| Code: | | /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 |
then:
| Code: | | USE="savedconfig" emerge linux-firmware |
the config file is not being over witten.
_________________
Scott
Peace |
|
| Back to top |
|
|
|
Kernel & Hardware
