| View previous topic :: View next topic |
| Author |
Message |
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
 Posted: Tue Apr 16, 2013 6:39 pm Post subject: EW-7811un - jak uruchomić wifi? |
 |
|
kernel skompilowany z modułami realteka
moduły się ładują
ale nie ma interfejsu wlan0
_________________
cogito ergo sum |
|
| Back to top |
|
 |
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Tue Apr 16, 2013 7:25 pm Post subject: |
|
|
Jakos, na pewno.
Podaj szeczegoly, logi, co zrobiles, lspci, ifconfig -a... |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 9:35 am Post subject: |
|
|
| Code: | # grep RTL /usr/share/linux-3.6.11-gentoo/.config
CONFIG_USB_RTL8150=m
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
# CONFIG_IBM_RTL is not set |
| Code: | # dmesg
[ 0.376026] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376106] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.376108] pnp 00:09: [io 0x0230-0x023f]
[ 0.376109] pnp 00:09: [io 0x0290-0x029f]
[ 0.376110] pnp 00:09: [io 0x0300-0x030f]
[ 0.376111] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.376254] system 00:09: [io 0x0230-0x023f] has been reserved
[ 0.376282] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.376309] system 00:09: [io 0x0300-0x030f] has been reserved
[ 0.376336] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.376364] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376383] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.376450] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.376478] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376537] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.376539] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.376540] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.376541] pnp 00:0b: [mem 0x00100000-0xdfefffff]
[ 0.376542] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.376609] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.376637] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.376664] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.376692] system 00:0b: [mem 0x00100000-0xdfefffff] could not be reserved
[ 0.376720] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.376747] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.376805] pnp: PnP ACPI: found 12 devices
[ 0.376831] ACPI: ACPI bus type pnp unregistered
[ 0.381718] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.381745] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.381773] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.381801] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.381831] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.381858] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.381886] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.381914] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.381944] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.381972] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.382002] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.382047] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.382048] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.382049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.382051] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.382052] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff]
[ 0.382053] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.382054] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.382056] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.382057] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.382058] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.382060] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.382061] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.382062] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.382064] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.382065] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.382066] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.382067] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.382069] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.382070] pci_bus 0000:03: resource 8 [mem 0xdff00000-0xdfffffff]
[ 0.382071] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.382144] NET: Registered protocol family 2
[ 0.382302] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.383157] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.383448] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.383509] TCP: reno registered
[ 0.383537] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.383600] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.383740] NET: Registered protocol family 1
[ 0.383772] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.383974] pci 0000:01:05.0: Boot video device
[ 0.383981] PCI: CLS 64 bytes, default 64
[ 0.384005] Trying to unpack rootfs image as initramfs...
[ 0.680413] Freeing initrd memory: 3388k freed
[ 0.681634] PCI-DMA: Disabling AGP.
[ 0.681720] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.681747] PCI-DMA: using GART IOMMU.
[ 0.681774] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.684325] LVT offset 1 assigned for vector 0x400
[ 0.684359] IBS: LVT offset 1 assigned
[ 0.684405] perf: AMD IBS detected (0x0000001f)
[ 0.685100] audit: initializing netlink socket (disabled)
[ 0.685139] type=2000 audit(1366144922.680:1): initialized
[ 0.685682] VFS: Disk quotas dquot_6.5.2
[ 0.685733] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.686014] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.686152] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.686423] OCFS2 1.5.0
[ 0.686517] ocfs2: Registered cluster interface o2cb
[ 0.686546] OCFS2 DLMFS 1.5.0
[ 0.686612] OCFS2 User DLM kernel interface loaded
[ 0.686642] OCFS2 Node Manager 1.5.0
[ 0.686746] OCFS2 DLM 1.5.0
[ 0.686993] GFS2 installed
[ 0.687024] msgmni has been set to 15981
[ 0.687430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.687461] io scheduler noop registered
[ 0.687490] io scheduler deadline registered
[ 0.687536] io scheduler cfq registered (default)
[ 0.687670] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[ 0.687963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.688543] Linux agpgart interface v0.103
[ 0.688821] [drm] Initialized drm 1.1.0 20060810
[ 0.688890] [drm] radeon defaulting to kernel modesetting.
[ 0.688919] [drm] radeon kernel modesetting enabled.
[ 0.689149] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1043:0x83A2).
[ 0.689192] [drm] register mmio base: 0xFE9F0000
[ 0.689220] [drm] register mmio size: 65536
[ 0.693084] ATOM BIOS: 113
[ 0.693125] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
[ 0.693157] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 0.696688] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.696719] [drm] RAM width 32bits DDR
[ 0.697143] [TTM] Zone kernel: Available graphics memory: 4091238 kiB
[ 0.697173] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.697200] [TTM] Initializing pool allocator
[ 0.697229] [TTM] Initializing DMA pool allocator
[ 0.697277] [drm] radeon: 128M of VRAM memory ready
[ 0.697304] [drm] radeon: 512M of GTT memory ready.
[ 0.697332] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.697358] [drm] Driver supports precise vblank timestamp query.
[ 0.697402] [drm] radeon: irq initialized.
[ 0.697431] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.698051] [drm] Loading RS780 Microcode
[ 0.699658] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 0.699733] radeon 0000:01:05.0: WB enabled
[ 0.699761] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880212a66c00
[ 0.700179] radeon 0000:01:05.0: setting latency timer to 64
[ 0.734504] [drm] ring test on 0 succeeded in 1 usecs
[ 0.734585] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.735474] [drm] Radeon Display Connectors
[ 0.735501] [drm] Connector 0:
[ 0.735527] [drm] VGA-1
[ 0.735553] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 0.735581] [drm] Encoders:
[ 0.735607] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 0.735633] [drm] Connector 1:
[ 0.735659] [drm] DVI-D-1
[ 0.735685] [drm] HPD1
[ 0.735711] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 0.735739] [drm] Encoders:
[ 0.735765] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 0.735803] [drm] radeon: power management initialized
[ 0.771110] [drm] fb mappable at 0xF0142000
[ 0.771136] [drm] vram apper at 0xF0000000
[ 0.771162] [drm] size 5242880
[ 0.771188] [drm] fb depth is 24
[ 0.771214] [drm] pitch is 5120
[ 0.771474] fbcon: radeondrmfb (fb0) is primary device
[ 0.817578] Console: switching to colour frame buffer device 160x64
[ 0.822547] fb0: radeondrmfb frame buffer device
[ 0.822569] drm: registered panic notifier
[ 0.822590] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0
[ 0.824627] brd: module loaded
[ 0.825672] loop: module loaded
[ 0.825987] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.826371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.826396] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.826656] mousedev: PS/2 mouse device common for all mice
[ 0.826844] rtc_cmos 00:03: RTC can wake from S4
[ 0.827007] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.827056] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.827131] cpuidle: using governor ladder
[ 0.827151] cpuidle: using governor menu
[ 0.827334] TCP: cubic registered
[ 0.827351] NET: Registered protocol family 17
[ 0.827853] registered taskstats version 1
[ 0.828125] rtc_cmos 00:03: setting system clock to 2013-04-16 20:42:03 UTC (1366144923)
[ 0.828237] Freeing unused kernel memory: 504k freed
[ 0.864905] ACPI: bus type scsi registered
[ 0.865104] libata version 3.00 loaded.
[ 1.105382] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.105916] scsi0 : pata_atiixp
[ 1.106296] scsi1 : pata_atiixp
[ 1.106563] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.106564] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.760270] ahci 0000:00:11.0: version 3.0
[ 1.760403] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.760406] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.761841] scsi2 : ahci
[ 1.761997] scsi3 : ahci
[ 1.762143] scsi4 : ahci
[ 1.762287] scsi5 : ahci
[ 1.762431] scsi6 : ahci
[ 1.762590] scsi7 : ahci
[ 1.762716] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[ 1.762719] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[ 1.762721] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[ 1.762723] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[ 1.762725] ata7: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
[ 1.762727] ata8: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
[ 2.100051] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.110065] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.110126] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.120047] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.120080] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.310061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.356542] ata3.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 2.356544] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.414851] ata3.00: configured for UDMA/133
[ 2.414970] scsi 2:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 2.415238] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.415326] sd 2:0:0:0: [sda] Write Protect is off
[ 2.415328] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.415357] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.483738] sda: sda1 sda2 < sda5 >
[ 2.484221] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.640745] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.785318] scsi: <fdomain> Detection failed (no card)
[ 2.838340] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.918679] imm: Version 2.05 (for Linux 2.4.0)
[ 3.053805] Fusion MPT base driver 3.04.20
[ 3.053807] Copyright (c) 1999-2008 LSI Corporation
[ 3.099302] Fusion MPT SPI Host driver 3.04.20
[ 3.132646] Fusion MPT FC Host driver 3.04.20
[ 3.161159] Fusion MPT SAS Host driver 3.04.20
[ 3.183083] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 3.205120] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.227682] Compaq SMART2 Driver (v 2.6.0)
[ 3.271625] HP CISS Driver (v 3.6.26)
[ 3.341512] Adaptec aacraid driver 1.2-0[29800]-ms
[ 3.392829] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.393790] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.483179] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
[ 3.510669] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
[ 3.538524] Emulex LightPulse Fibre Channel SCSI driver 8.3.32
[ 3.538527] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 3.641523] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.678407] ACPI: bus type usb registered
[ 3.678526] usbcore: registered new interface driver usbfs
[ 3.678575] usbcore: registered new interface driver hub
[ 3.678654] usbcore: registered new device driver usb
[ 3.680084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.680198] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.680203] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.680209] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.680236] ehci_hcd 0000:00:12.2: debug port 1
[ 3.680254] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 3.700046] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.700059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.700061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.700063] usb usb1: Product: EHCI Host Controller
[ 3.700064] usb usb1: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
[ 3.700065] usb usb1: SerialNumber: 0000:00:12.2
[ 3.700265] hub 1-0:1.0: USB hub found
[ 3.700267] hub 1-0:1.0: 6 ports detected
[ 3.700343] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.700347] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.700349] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.700373] ehci_hcd 0000:00:13.2: debug port 1
[ 3.700387] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
[ 3.720045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.720059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.720061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.720062] usb usb2: Product: EHCI Host Controller
[ 3.720064] usb usb2: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
[ 3.720065] usb usb2: SerialNumber: 0000:00:13.2
[ 3.720247] hub 2-0:1.0: USB hub found
[ 3.720250] hub 2-0:1.0: 6 ports detected
[ 3.752063] Initializing USB Mass Storage driver...
[ 3.752143] usbcore: registered new interface driver usb-storage
[ 3.752145] USB Mass Storage support registered.
[ 3.779869] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.807422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.807527] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.807534] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.807561] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
[ 3.874072] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.874074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.874076] usb usb3: Product: OHCI Host Controller
[ 3.874077] usb usb3: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
[ 3.874079] usb usb3: SerialNumber: 0000:00:12.0
[ 3.874283] hub 3-0:1.0: USB hub found
[ 3.874288] hub 3-0:1.0: 3 ports detected
[ 3.874353] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 3.874357] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 3.874370] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
[ 3.934054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.934057] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.934059] usb usb4: Product: OHCI Host Controller
[ 3.934060] usb usb4: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
[ 3.934061] usb usb4: SerialNumber: 0000:00:12.1
[ 3.934654] hub 4-0:1.0: USB hub found
[ 3.934662] hub 4-0:1.0: 3 ports detected
[ 3.934729] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.934733] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.934746] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
[ 4.004056] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.004058] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.004060] usb usb5: Product: OHCI Host Controller
[ 4.004061] usb usb5: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
[ 4.004062] usb usb5: SerialNumber: 0000:00:13.0
[ 4.004258] hub 5-0:1.0: USB hub found
[ 4.004263] hub 5-0:1.0: 3 ports detected
[ 4.004317] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.004321] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 4.004335] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
[ 4.050050] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 4.074047] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.074049] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.074050] usb usb6: Product: OHCI Host Controller
[ 4.074051] usb usb6: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
[ 4.074053] usb usb6: SerialNumber: 0000:00:13.1
[ 4.074252] hub 6-0:1.0: USB hub found
[ 4.074257] hub 6-0:1.0: 3 ports detected
[ 4.074310] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.074314] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4.074328] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
[ 4.134059] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.134061] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.134062] usb usb7: Product: OHCI Host Controller
[ 4.134063] usb usb7: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
[ 4.134064] usb usb7: SerialNumber: 0000:00:14.5
[ 4.134261] hub 7-0:1.0: USB hub found
[ 4.134267] hub 7-0:1.0: 2 ports detected
[ 4.163286] usbcore: registered new interface driver usbhid
[ 4.163288] usbhid: USB HID core driver
[ 4.211710] usb 2-4: New USB device found, idVendor=7392, idProduct=7811
[ 4.211713] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.211714] usb 2-4: Product: 802.11n WLAN Adapter
[ 4.211716] usb 2-4: Manufacturer: Realtek
[ 4.211717] usb 2-4: SerialNumber: 00e04c000001
[ 4.673549] device-mapper: uevent: version 1.0.3
[ 4.673648] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 5.049476] md: raid0 personality registered for level 0
[ 5.080617] md: raid1 personality registered for level 1
[ 5.122362] async_tx: api initialized (async)
[ 5.290031] raid6: sse2x1 4514 MB/s
[ 5.460029] raid6: sse2x2 7307 MB/s
[ 5.630015] raid6: sse2x4 8449 MB/s
[ 5.630016] raid6: using algorithm sse2x4 (8449 MB/s)
[ 5.630017] raid6: using intx1 recovery algorithm
[ 5.650349] xor: automatically using best checksumming function:
[ 5.750019] generic_sse: 14008.800 MB/sec
[ 5.757378] md: raid6 personality registered for level 6
[ 5.757379] md: raid5 personality registered for level 5
[ 5.757380] md: raid4 personality registered for level 4
[ 5.792373] md: raid10 personality registered for level 10
[ 5.824998] md: linear personality registered for level -1
[ 5.857532] md: multipath personality registered for level -4
[ 5.897275] JFS: nTxBlock = 8192, nTxLock = 65536
[ 5.943366] RPC: Registered named UNIX socket transport module.
[ 5.943368] RPC: Registered udp transport module.
[ 5.943369] RPC: Registered tcp transport module.
[ 5.943370] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.985123] fuse init (API version 7.20)
[ 6.019882] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.019884] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.096116] Loading iSCSI transport class v2.0-870.
[ 6.436391] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 6.494705] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 6.595609] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.578351] systemd-udevd[16722]: starting version 197
[ 10.455401] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 10.516531] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 10.516580] ACPI: Power Button [PWRB]
[ 10.516619] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.516650] ACPI: Power Button [PWRF]
[ 10.618704] ATK0110 ATK0110:00: adding...
[ 10.618726] ATK0110 ATK0110:00: board ID = M4A785T-V EVO
[ 10.618732] ATK0110 ATK0110:00: Using old hwmon interface
[ 10.618758] ATK0110 ATK0110:00: voltage: 0x6020000 Vcore Voltage [850-1600] enabled
[ 10.618762] ATK0110 ATK0110:00: voltage: 0x6020001 +3.3 Voltage [2970-3630] enabled
[ 10.618764] ATK0110 ATK0110:00: voltage: 0x6020002 +5 Voltage [4500-5500] enabled
[ 10.618767] ATK0110 ATK0110:00: voltage: 0x6020003 +12 Voltage [10200-13800] enabled
[ 10.618778] ATK0110 ATK0110:00: temperature: 0x6030000 CPU Temperature [600-950] enabled
[ 10.618780] ATK0110 ATK0110:00: temperature: 0x6030001 MB Temperature [450-750] enabled
[ 10.618794] ATK0110 ATK0110:00: fan: 0x6040000 CPU FAN Speed [600-7200] enabled
[ 10.618796] ATK0110 ATK0110:00: fan: 0x6040001 CHASSIS FAN Speed [600-7200] enabled
[ 10.618798] ATK0110 ATK0110:00: fan: 0x6040002 POWER FAN Speed [600-7200] enabled
[ 10.618800] ATK0110 ATK0110:00: registering hwmon device
[ 10.618847] ATK0110 ATK0110:00: populating sysfs directory
[ 10.618850] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120711/utaddress-251)
[ 10.618855] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20120711/utaddress-251)
[ 10.618859] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20120711/utaddress-251)
[ 10.618862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.772061] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.772264] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 10.772341] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900100fe000, e0:cb:4e:d5:cd:81, XID 083000c0 IRQ 41
[ 10.772343] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.824103] kvm: Nested Virtualization enabled
[ 10.824105] kvm: Nested Paging enabled
[ 10.876362] cfg80211: Calling CRDA to update world regulatory domain
[ 11.014054] rtl8192cu: Chip version 0x10
[ 11.098546] rtl8192cu: MAC address: 80:1f:02:3f:53:8c
[ 11.098549] rtl8192cu: Board Type 0
[ 11.098789] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 11.098799] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[ 11.098813] usbcore: registered new interface driver rtl8192cu
[ 11.103354] rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available
[ 11.246828] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 11.400904] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
[ 11.400911] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 14.465898] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 14.715453] Adding 2002608k swap on /dev/sda5. Priority:-1 extents:1 across:2002608k
[ 17.175945] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
[ 17.211321] r8169 0000:02:00.0: eth0: link down
[ 154.190028] usb 5-3: new low-speed USB device number 2 using ohci_hcd
[ 154.377076] usb 5-3: New USB device found, idVendor=04f3, idProduct=0110
[ 154.377079] usb 5-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 154.385214] input: HID 04f3:0110 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3
[ 154.385305] hid-generic 0003:04F3:0110.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0110] on usb-0000:00:13.0-3/input0
[ 154.393256] input: HID 04f3:0110 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input4
[ 154.393367] hid-generic 0003:04F3:0110.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04f3:0110] on usb-0000:00:13.0-3/input1 |
| Code: | # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: ASUSTeK Computer Inc. AMD RS780/RS880 PCI to PCI bridge (int gfx)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200]
01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) |
| Code: | # lsmod | grep rtl
rtl8192cu 77732 0
rtlwifi 79734 1 rtl8192cu
rtl8192c_common 46849 1 rtl8192cu
mac80211 180721 3 rtlwifi,rtl8192c_common,rtl8192cu
cfg80211 145494 2 mac80211,rtlwifi
usbcore 123941 9 uhci_hcd,rtlwifi,usb_storage,hid_sony,ohci_hcd,ehci_hcd,usbhid,rtl8192cu,sl811_hcd |
| Code: | # ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.103 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e2cb:4eff:fed5:cd81 prefixlen 64 scopeid 0x20<link>
ether e0:cb:4e:d5:cd:81 txqueuelen 1000 (Ethernet)
RX packets 283947 bytes 347120138 (331.0 MiB)
RX errors 0 dropped 2 overruns 0 frame 0
TX packets 196374 bytes 26026926 (24.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
_________________
cogito ergo sum |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Wed Apr 17, 2013 12:00 pm Post subject: |
|
|
| Code: | | Firmware rtlwifi/rtl8192cufw.bin not available |
Zainstaluj firmware |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 12:08 pm Post subject: |
|
|
tylko jak to uczynić?
domniemam, że linux-firmware nic nie da
_________________
cogito ergo sum |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Wed Apr 17, 2013 12:29 pm Post subject: |
|
|
| Dlaczego domniemasz zamiast sprawdzic? Google mowi, ze linux-firmware zawiera go. |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 12:31 pm Post subject: |
|
|
ale ja mam radeon-ucode Radeon HD4200
czy jak wywalę ucode'a i zainstaluję firmware to grafika dalej będzie śmigać?
_________________
cogito ergo sum |
|
| Back to top |
|
|
Bialy
Guru
Joined: 20 Mar 2006
Posts: 486
|
| Posted: Wed Apr 17, 2013 1:27 pm Post subject: |
|
|
| Oniryczny wrote: | | ale ja mam radeon-ucode Radeon HD4200 |
Nie myl dwóch różnych systemów walutowych  |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 1:47 pm Post subject: |
|
|
nie rozumiem
zainstalowałem pakiet radeon-ucode do mojej grafiki a ten blokuje linux-firmware
więc?
_________________
cogito ergo sum |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Wed Apr 17, 2013 1:54 pm Post subject: |
|
|
Do pieca z radeon-ucode.
| Quote: | | Yeah, uninstall radeon-ucode and install linux-firmware. It contains a whole bunch of firmware, including the radeon and realtek stuff you need. |
Sprawdz czy bedzie wszystko okey po tym, jak nie, to bedziemy radzic. |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 2:00 pm Post subject: |
|
|
| Code: | >>> sys-kernel/linux-firmware-20120924 merged.
>>> Recording sys-kernel/linux-firmware in "world" favorites file...
* Messages for package sys-kernel/linux-firmware-20120924:
* Your configuration for sys-kernel/linux-firmware-20120924 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20120924 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at http://bugs.gentoo.org unless you report exactly which
* two packages install the same file(s). Once again, please do NOT file
* a bug report unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /lib/firmware/whiteheat_loader.fw
* /lib/firmware/whiteheat.fw
* /lib/firmware/acenic/tg2.bin
* /lib/firmware/acenic/tg1.bin
* /lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw
* /lib/firmware/bnx2/bnx2-mips-09-6.2.1a.fw
* /lib/firmware/bnx2/bnx2-mips-06-6.2.1.fw
* /lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw
* /lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw
* /lib/firmware/qlogic/12160.bin
* /lib/firmware/qlogic/1040.bin
* /lib/firmware/qlogic/1280.bin
* /lib/firmware/tehuti/bdx.bin
* /lib/firmware/ositech/Xilinx7OD.bin
* /lib/firmware/sun/cassini.bin
* /lib/firmware/e100/d101m_ucode.bin
* /lib/firmware/e100/d101s_ucode.bin
* /lib/firmware/e100/d102e_ucode.bin
* /lib/firmware/cxgb3/ael2020_twx_edc.bin
* /lib/firmware/cxgb3/ael2005_twx_edc.bin
* /lib/firmware/cxgb3/t3fw-7.10.0.bin
* /lib/firmware/cxgb3/ael2005_opt_edc.bin
* /lib/firmware/cxgb3/t3b_psram-1.1.0.bin
* /lib/firmware/cxgb3/t3c_psram-1.1.0.bin
* /lib/firmware/tigon/tg3_tso5.bin
* /lib/firmware/tigon/tg3_tso.bin
* /lib/firmware/tigon/tg3.bin
* /lib/firmware/radeon/RS690_cp.bin
* /lib/firmware/radeon/RV730_me.bin
* /lib/firmware/radeon/RS780_me.bin
* /lib/firmware/radeon/R200_cp.bin
* /lib/firmware/radeon/RS780_pfp.bin
* /lib/firmware/radeon/RV730_pfp.bin
* /lib/firmware/radeon/RV630_me.bin
* /lib/firmware/radeon/RS600_cp.bin
* /lib/firmware/radeon/R420_cp.bin
* /lib/firmware/radeon/RV670_pfp.bin
* /lib/firmware/radeon/RV670_me.bin
* /lib/firmware/radeon/RV770_pfp.bin
* /lib/firmware/radeon/RV770_me.bin
* /lib/firmware/radeon/RV635_me.bin
* /lib/firmware/radeon/RV710_pfp.bin
* /lib/firmware/radeon/R300_cp.bin
* /lib/firmware/radeon/RV610_pfp.bin
* /lib/firmware/radeon/RV635_pfp.bin
* /lib/firmware/radeon/RV620_pfp.bin
* /lib/firmware/radeon/R600_me.bin
* /lib/firmware/radeon/R600_pfp.bin
* /lib/firmware/radeon/RV710_me.bin
* /lib/firmware/radeon/RV620_me.bin
* /lib/firmware/radeon/RV630_pfp.bin
* /lib/firmware/radeon/R100_cp.bin
* /lib/firmware/radeon/RV610_me.bin
* /lib/firmware/radeon/R520_cp.bin
* /lib/firmware/cis/COMpad4.cis
* /lib/firmware/cis/MT5634ZLX.cis
* /lib/firmware/cis/RS-COM-2P.cis
* /lib/firmware/cis/3CXEM556.cis
* /lib/firmware/cis/LA-PCM.cis
* /lib/firmware/cis/NE2K.cis
* /lib/firmware/cis/SW_555_SER.cis
* /lib/firmware/cis/tamarack.cis
* /lib/firmware/cis/PE520.cis
* /lib/firmware/cis/COMpad2.cis
* /lib/firmware/cis/SW_7xx_SER.cis
* /lib/firmware/cis/PE-200.cis
* /lib/firmware/cis/3CCFEM556.cis
* /lib/firmware/cis/SW_8xx_SER.cis
* /lib/firmware/cis/PCMLM28.cis
* /lib/firmware/cis/DP83903.cis
* /lib/firmware/korg/k1212.dsp
* /lib/firmware/ess/maestro3_assp_kernel.fw
* /lib/firmware/ess/maestro3_assp_minisrc.fw
* /lib/firmware/matrox/g400_warp.fw
* /lib/firmware/matrox/g200_warp.fw
* /lib/firmware/yamaha/ds1_ctrl.fw
* /lib/firmware/yamaha/ds1e_ctrl.fw
* /lib/firmware/yamaha/ds1_dsp.fw
* /lib/firmware/advansys/38C1600.bin
* /lib/firmware/advansys/38C0800.bin
* /lib/firmware/advansys/3550.bin
* /lib/firmware/advansys/mcode.bin
* /lib/firmware/3com/typhoon.bin
* /lib/firmware/kaweth/trigger_code.bin
* /lib/firmware/kaweth/new_code.bin
* /lib/firmware/kaweth/new_code_fix.bin
* /lib/firmware/kaweth/trigger_code_fix.bin
* /lib/firmware/adaptec/starfire_rx.bin
* /lib/firmware/adaptec/starfire_tx.bin
* /lib/firmware/r128/r128_cce.bin
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20120924' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* GNU info directory index is up-to-date. |
_________________
cogito ergo sum |
|
| Back to top |
|
|
Bialy
Guru
Joined: 20 Mar 2006
Posts: 486
|
| Posted: Wed Apr 17, 2013 2:03 pm Post subject: |
|
|
| Oniryczny wrote: | | zainstalowałem pakiet radeon-ucode do mojej grafiki a ten blokuje linux-firmware |
O tym nie wiedziałam, bo nigdzie tego nie napisałeś.
Google jednak nie boli...
Pierwszy rezultat:
| Code: | Firmware
There is IRQ microcode for R600 and newer GPUs. Install either x11-drivers/radeon-ucode or sys-kernel/linux-firmware (contains also other firmware) |
|
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Wed Apr 17, 2013 2:07 pm Post subject: |
|
|
no zrobiłem to wszystko, błędy podałem wyżej
nie mniej jednak po reboocie system wstał poprawnie i Direct Rendering Yes 
| Code: | # dmesg | grep rtl
[ 11.592716] rtl8192cu: Chip version 0x10
[ 11.677198] rtl8192cu: MAC address: 80:1f:02:3f:53:8c
[ 11.677201] rtl8192cu: Board Type 0
[ 11.677447] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 11.677460] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[ 11.677486] usbcore: registered new interface driver rtl8192cu
[ 11.734992] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.735439] rtlwifi: wireless switch is on |
| Code: | # ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.103 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e2cb:4eff:fed5:cd81 prefixlen 64 scopeid 0x20<link>
ether e0:cb:4e:d5:cd:81 txqueuelen 1000 (Ethernet)
RX packets 162 bytes 15658 (15.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 166 bytes 35461 (34.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 80:1f:02:3f:53:8c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
chyba dobrze...
miałem kłopot aby oba interfejsy działały jednocześnie eth0/wlan0
(Wireless + Ethernet connectios ze strony http://en.gentoo-wiki.com/wiki/Wireless/Configuration coś nie trybi)
ale po usunięciu eth0 z autostartu wlan0 śmiga...
_________________
cogito ergo sum |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish) 
