| View previous topic :: View next topic |
| Author |
Message |
wolf_99
Apprentice
Joined: 22 Oct 2003
Posts: 213
|
 Posted: Mon Jan 05, 2004 4:10 pm Post subject: |
 |
|
I have the same error.
I posted at https://forums.gentoo.org/viewtopic.php?t=121194.
I didn't edit my /etc/modules.d/alsa what do you need to change there?
_________________
To err is human. To really fuck up, use a computer. |
|
| Back to top |
|
 |
rhat
n00b
Joined: 28 Oct 2003
Posts: 64
Location: Pittsburgh
|
| Posted: Wed Jan 07, 2004 4:08 pm Post subject: |
|
|
I've followed the guide(s) from this post, and I've gotten ALSA to load with all the modules and other bits, but I keep getting an error from alsacrtl stating that "no soundcards found...", and I get similar errors from alsamixer, and amixer. What am I doing wrong?
_________________
You never really respect how well made computer hardware is, untill you find out that you've had a sunflower-seed jammed into the same bus as your video card for the last few months, and you didn't notice.
-rhat, true story |
|
| Back to top |
|
|
calhoun
Tux's lil' helper
Joined: 14 Nov 2003
Posts: 91
Location: Point Pleasant, NJ
|
| Posted: Fri Jan 09, 2004 4:12 am Post subject: |
|
|
| bump |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Sat Jan 10, 2004 9:42 am Post subject: |
|
|
You have to specify your soundcard there. e.g. mine reads: | Code: | # Alsa 0.9.X kernel modules' configuration file.
# $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.1 2003/08/05 21:07:55 johnm Exp $
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-intel8x0
## OSS/Free portion
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd cards_limit=2
|
|
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Sat Jan 10, 2004 9:44 am Post subject: |
|
|
| rhat wrote: | | I've followed the guide(s) from this post, and I've gotten ALSA to load with all the modules and other bits, but I keep getting an error from alsacrtl stating that "no soundcards found...", and I get similar errors from alsamixer, and amixer. What am I doing wrong? |
Did you do | Code: | nano -w /etc/modules.d/alsa
modules-update |
for specification of your soundcard? |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Sat Jan 10, 2004 9:48 am Post subject: |
|
|
| immo wrote: | Hello,
i followed the instructions given here and the alsa guide on gentoo.org but i dont get any sound.
i have everything enabled in the kernel, emerged alsa-lib and utils, edited /etc/modules.d/alsa, and ive added alsasound to the boot runlevel. everything seems to be fine, i get no errors, aplay and xmms play something but i hear nothing 
of course i unmuted the speaker etc.
i can post the amixer output but i havent found anything strange.
i hope someone can help,
thx in advance
Jan |
So your sound card is recognized by ALSA (it will show at boot-up)? If all is well then I can only think of hardware-related problems, e.g. are the cables & connections right, speakers switched on, volume up etc. |
|
| Back to top |
|
|
agent_jdh
Veteran
Joined: 08 Aug 2002
Posts: 1783
Location: Scotland
|
| Posted: Sat Jan 10, 2004 2:49 pm Post subject: New ALSA in mm-patches |
|
|
The latest akpm patches (used by mm-sources) 2.6.1-mm1 and mm2 have the latest Alsa in them, 1.0.1, which may help some people having problems.
The 'standard' kernel 2.6.1 is pretty outdated, with v0.9.7.
_________________
Jingle Jangle Jewellery |
|
| Back to top |
|
|
calhoun
Tux's lil' helper
Joined: 14 Nov 2003
Posts: 91
Location: Point Pleasant, NJ
|
| Posted: Sat Jan 10, 2004 3:10 pm Post subject: |
|
|
| immo wrote: | Hello,
i followed the instructions given here and the alsa guide on gentoo.org but i dont get any sound.
i have everything enabled in the kernel, emerged alsa-lib and utils, edited /etc/modules.d/alsa, and ive added alsasound to the boot runlevel. everything seems to be fine, i get no errors, aplay and xmms play something but i hear nothing
of course i unmuted the speaker etc.
i can post the amixer output but i havent found anything strange.
i hope someone can help,
thx in advance
Jan |
IMMO, you said you unmuted the speaker etc... Does that mean you unmuted Master, PCM, CD, Headphone also? |
|
| Back to top |
|
|
glaskows
Tux's lil' helper
Joined: 05 Jan 2004
Posts: 77
Location: Chile
|
| Posted: Sat Jan 10, 2004 3:49 pm Post subject: |
|
|
| Helena wrote: | | immo wrote: | Hello,
i followed the instructions given here and the alsa guide on gentoo.org but i dont get any sound.
i have everything enabled in the kernel, emerged alsa-lib and utils, edited /etc/modules.d/alsa, and ive added alsasound to the boot runlevel. everything seems to be fine, i get no errors, aplay and xmms play something but i hear nothing
of course i unmuted the speaker etc.
i can post the amixer output but i havent found anything strange.
i hope someone can help,
thx in advance
Jan |
So your sound card is recognized by ALSA (it will show at boot-up)? If all is well then I can only think of hardware-related problems, e.g. are the cables & connections right, speakers switched on, volume up etc. |
Same problem here (and a lot of other places). It's all seems ok but no sound.
I have an AN7 card (Realtek ALC658 chipset) and i can't get the sound working. I've done pretty much all the combinations of modules-builts in-drivers(from ALSA, not kernel) but nothing. So i am just sitting here, expecting a revelation or some patch.
P.S: please... stop about the unmute thing... all inteligent people read Docs first (thanks) |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Sat Jan 10, 2004 4:43 pm Post subject: Re: New ALSA in mm-patches |
|
|
| agent_jdh wrote: | The latest akpm patches (used by mm-sources) 2.6.1-mm1 and mm2 have the latest Alsa in them, 1.0.1, which may help some people having problems.
The 'standard' kernel 2.6.1 is pretty outdated, with v0.9.7. |
Wrong, it's ALSA 1.0.0 rc2: | Code: | Odysseus root # uname -a
Linux Odysseus 2.6.1-gentoo #1 Sat Jan 10 16:20:19 CET 2004 i686 Intel(R) Pentium(R) 4 CPU 2.53GHz GenuineIntel GNU/Linux
Odysseus root # dmesg|grep Sound
Advanced Linux Sound Architecture Driver Version 1.0.0rc2. |
|
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Sat Jan 10, 2004 4:51 pm Post subject: |
|
|
| glaskows wrote: | Same problem here (and a lot of other places). It's all seems ok but no sound.
I have an AN7 card (Realtek ALC658 chipset) and i can't get the sound working. I've done pretty much all the combinations of modules-builts in-drivers(from ALSA, not kernel) but nothing. So i am just sitting here, expecting a revelation or some patch.
P.S: please... stop about the unmute thing... all inteligent people read Docs first (thanks) |
I wasn't talking about unmuting, I meant "real" hardware problems. I myself discovered more than once that I forgot to switch on the speakers or plugged the audio cable into the wrong jacks, etc.
I will try to help, but I'm not a Linux expert. Can you post the output of dmesg? |
|
| Back to top |
|
|
calhoun
Tux's lil' helper
Joined: 14 Nov 2003
Posts: 91
Location: Point Pleasant, NJ
|
| Posted: Sat Jan 10, 2004 5:03 pm Post subject: |
|
|
| Quote: | I wasn't talking about unmuting, I meant "real" hardware problems. I myself discovered more than once that I forgot to switch on the speakers or plugged the audio cable into the wrong jacks, etc.
I will try to help, but I'm not a Linux expert. Can you post the output of dmesg? |
Helena, glaskow was talking about me.
I also agree, we need some more info. Output from dmesg would be a good start. Also manually stop alsasound and then restart it post any output from it.
As for unmuting, there are about 20 -30 settings in the mixer, if immo didn't unmute the proper thing it won't work. Especially since he said he didn't get any errors. |
|
| Back to top |
|
|
Gªutama
n00b
Joined: 08 Jun 2003
Posts: 32
Location: Tokyo, Japan
|
| Posted: Tue Jan 13, 2004 2:50 pm Post subject: |
|
|
Hello I have some kind of permission problem with my alsa installation.
I have compiled eveyting as modules, when I boot I get errors that tells me that my soundcard (maestro3) is already loaded into the kernel. I have seen a few other people here with the same problem. But from what I can tell that is not such a big problem.
However when I last night was sitting and fiddeling with the installation I menaged to get it all up and running. But now when I rebooted it looks like alsa starts fine but when I try to play I get this:
| Code: | aplay /usr/lib/MozillaFirebird/res/samples/test.wav
Playing WAVE '/usr/lib/MozillaFirebird/res/samples/test.wav' : Unsigned 8 bit, Rate 22050 Hz, Mono
aplay: pcm_write:1083: write error: Input/output error |
the sound related modules loaded are:
| Code: | snd_intel8x0 31652 0
snd_mpu401_uart 7808 1 snd_intel8x0
snd_rawmidi 25120 1 snd_mpu401_uart
snd_maestro3 24388 1
snd_ac97_codec 63396 2 snd_intel8x0,snd_maestro3
snd_seq_oss 35104 0
snd_seq_midi_event 7744 1 snd_seq_oss
snd_seq 56752 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8068 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 54052 0
snd_pcm 101728 3 snd_intel8x0,snd_maestro3,snd_pcm_oss
snd_page_alloc 11876 2 snd_intel8x0,snd_pcm
snd_timer 26240 2 snd_seq,snd_pcm
snd_mixer_oss 19552 2 snd_pcm_oss
snd 55492 13 snd_intel8x0,snd_mpu401_uart,snd_rawmidi,snd_ma
estro3,snd_ac97_codec,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_
pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9472 2 snd
|
In the /etc/devfsd.conf I have the permissions specified in the gentoo alsa guide. Namley
| Code: | # ALSA/OSS stuff
# Comment/change these if you want to change the permissions on
# the audio devices
LOOKUP snd MODLOAD ACTION snd
LOOKUP dsp MODLOAD
LOOKUP mixer MODLOAD
LOOKUP midi MODLOAD
REGISTER sound/.* PERMISSIONS root.audio 660
REGISTER snd/.* PERMISSIONS root.audio 660
|
does anyone have any ideas??
EDIT: I solved it.. It was a problem with the init script. It doesn't work att boot but it does when I start it manually. So now sound is go.
_________________
scars look better than tatoos
Last edited by Gªutama on Wed Jan 14, 2004 1:28 pm; edited 2 times in total |
|
| Back to top |
|
|
agent_jdh
Veteran
Joined: 08 Aug 2002
Posts: 1783
Location: Scotland
|
| Posted: Wed Jan 14, 2004 12:23 am Post subject: |
|
|
| Gªutama wrote: | Hello I have some kind of permission problem with my alsa installation.
I have compiled eveyting as modules, when I boot I get errors that tells me that my soundcard (maestro3) is already loaded into the kernel. I have seen a few other people here with the same problem. But from what I can tell that is not such a big problem.
However when I last night was sitting and fiddeling with the installation I menaged to get it all up and running. But now when I rebooted it looks like alsa starts fine but when I try to play I get this:
| Code: | aplay /usr/lib/MozillaFirebird/res/samples/test.wav
Playing WAVE '/usr/lib/MozillaFirebird/res/samples/test.wav' : Unsigned 8 bit, Rate 22050 Hz, Mono
aplay: pcm_write:1083: write error: Input/output error |
the sound related modules loaded are:
| Code: | snd_intel8x0 31652 0
snd_mpu401_uart 7808 1 snd_intel8x0
snd_rawmidi 25120 1 snd_mpu401_uart
snd_maestro3 24388 1
snd_ac97_codec 63396 2 snd_intel8x0,snd_maestro3
snd_seq_oss 35104 0
snd_seq_midi_event 7744 1 snd_seq_oss
snd_seq 56752 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8068 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 54052 0
snd_pcm 101728 3 snd_intel8x0,snd_maestro3,snd_pcm_oss
snd_page_alloc 11876 2 snd_intel8x0,snd_pcm
snd_timer 26240 2 snd_seq,snd_pcm
snd_mixer_oss 19552 2 snd_pcm_oss
snd 55492 13 snd_intel8x0,snd_mpu401_uart,snd_rawmidi,snd_ma
estro3,snd_ac97_codec,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_
pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9472 2 snd
|
In the /etc/devfsd.conf I have the permissions specified in the gentoo alsa guide. Namley
| Code: | # ALSA/OSS stuff
# Comment/change these if you want to change the permissions on
# the audio devices
LOOKUP snd MODLOAD ACTION snd
LOOKUP dsp MODLOAD
LOOKUP mixer MODLOAD
LOOKUP midi MODLOAD
REGISTER sound/.* PERMISSIONS root.audio 660
REGISTER snd/.* PERMISSIONS root.audio 660
|
does anyone have any ideas?? |
Is your normal user a member of the group audio?
Incidentally, the errors about modules already being loaded aren't critical, so maybe you should not have played around with them. These spurious error reports are fixed with the latest alsasound init script (which is in ~x86).
_________________
Jingle Jangle Jewellery
Last edited by agent_jdh on Wed Jan 14, 2004 1:13 am; edited 1 time in total |
|
| Back to top |
|
|
agent_jdh
Veteran
Joined: 08 Aug 2002
Posts: 1783
Location: Scotland
|
| Posted: Wed Jan 14, 2004 1:12 am Post subject: Re: New ALSA in mm-patches |
|
|
| Helena wrote: | | agent_jdh wrote: | The latest akpm patches (used by mm-sources) 2.6.1-mm1 and mm2 have the latest Alsa in them, 1.0.1, which may help some people having problems.
The 'standard' kernel 2.6.1 is pretty outdated, with v0.9.7. |
Wrong, it's ALSA 1.0.0 rc2: | Code: | Odysseus root # uname -a
Linux Odysseus 2.6.1-gentoo #1 Sat Jan 10 16:20:19 CET 2004 i686 Intel(R) Pentium(R) 4 CPU 2.53GHz GenuineIntel GNU/Linux
Odysseus root # dmesg|grep Sound
Advanced Linux Sound Architecture Driver Version 1.0.0rc2. |
|
Eh ... no. Now I don't know if it's because you've got a 2.6.1-gentoo kernel (as opposed to Linus's 2.6.1 from kernel.org), or if what you are doing is reporting the alsasound initscript and/or alsa-lib/alsa-utils version you have installed, but when you do | Code: | | cat /proc/asound/version |
with kernel 2.6.1 (what you get with development-sources), I get this- | Code: | Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
Compiled on Jan 9 2004 for kernel 2.6.1. |
and with 2.6.1-mm2 (what you get with mm-sources), I get this- | Code: | Advanced Linux Sound Architecture Driver Version 1.0.1 (Tue Dec 30 10:04:14 2003 UTC).
Compiled on Jan 10 2004 for kernel 2.6.1-mm2 |
Which indicates that the ALSA driver included with the standard 2.6.1 kernel is over 3 months old, whereas the driver included with 2.6.1-mm2 is only about 3 weeks old.
Regardless, the ALSA driver with 2.6.1-mm2 is the most up-to-date.
_________________
Jingle Jangle Jewellery |
|
| Back to top |
|
|
glaskows
Tux's lil' helper
Joined: 05 Jan 2004
Posts: 77
Location: Chile
|
| Posted: Wed Jan 14, 2004 1:46 am Post subject: |
|
|
If u still have no sound, and everything looks ok... try this:
Enable "Line-in as Sorround" and "Duplicate Front" at alsamixer, then connect your speakers to the line-in. It works for the Abit AN7 (nforce2 chipset + Realtek ALC658). |
|
| Back to top |
|
|
SimianRage
n00b
Joined: 03 Oct 2002
Posts: 30
Location: Indiana
|
| Posted: Wed Jan 14, 2004 6:50 am Post subject: |
|
|
| glaskows wrote: | If u still have no sound, and everything looks ok... try this:
Enable "Line-in as Sorround" and "Duplicate Front" at alsamixer, then connect your speakers to the line-in. It works for the Abit AN7 (nforce2 chipset + Realtek ALC658). |
Ah! Thanks for the reminder. I vaguely remember having to do this even before with the 2.4 kernel. I have an Asus A7V8X-X MB with onbard via8233 sound controller and can only get it working by doing what glaskows said.
FYI, I compiled the ALSA settings into the kernel and am using alsa-lib/alsa-utils 1.0.1 (the latter providing the alsasound init script now) |
|
| Back to top |
|
|
TheHaas
n00b
Joined: 13 Jun 2002
Posts: 61
|
| Posted: Thu Jan 15, 2004 4:11 pm Post subject: How I got ALSA and 2.6.1-mm2 to work |
|
|
This is what I did, after trying everything else in this thread to no avail:
1. Compile the kernel with ALSA w/ OSS Emulation into the kernel, and the driver for your soundcard as a module.
2. Reboot with your new kernel.
3. Run 'alsaconf' -- it will find your card, turn it on, and now you are good to go! |
|
| Back to top |
|
|
arkanlor
n00b
Joined: 06 Jan 2004
Posts: 30
|
| Posted: Thu Jan 15, 2004 6:32 pm Post subject: |
|
|
for all KDE users: changing volumes with Kmix and saving them as default restores everything fine.
I got ALSA fully compiled into my kernel, everything works. next step for me will be activating dmix. |
|
| Back to top |
|
|
blackspot
n00b
Joined: 07 Nov 2002
Posts: 6
Location: /Europe/Italy/Milan
|
| Posted: Tue Jan 20, 2004 9:08 pm Post subject: ALSA configured, kernel 2.6.1-r1, no sound |
|
|
Hi all,
mine is another "no sound" problem. With everything perfectly configured.
with "perfectly" I mean:
- kernel 2.6.1 with ALSA configured as modules
- alsa-lib and alsa-utils 1.0.1
- /etc/modules.d/alsa OK
- alsasound in the runlevel boot
- of course the card is UNMUTED (correctly unmuted, I'm used to ALSA)
- of course the speakers are working (sound is working with OSS, just it doesn't with ALSA)
- NO ERRORS displayed
- alsaconf detects and configures my card with any problem.
note:
- I've used ALSA since kernel 2.4.10 without problems. It was working 3 weeks ago !!!
- I read how-tos.
- no changes in my hardware.
- I just upgraded my kernel and my alsa-lib & utils.
- now kernel 2.6.1
- intel8x0 chip
I tried to come back to kernel 2.4.x but --> NO SOUND.
I think the problem is around alsa-lib >= 0.9.8 but I can't come back to 0.9.2 because it requires alsa-driver installed ... and I can't install alsa-driver with kernel 2.6.1
what do you think ?
thanks, simone |
|
| Back to top |
|
|
agent_jdh
Veteran
Joined: 08 Aug 2002
Posts: 1783
Location: Scotland
|
| Posted: Wed Jan 21, 2004 1:45 am Post subject: Re: ALSA configured, kernel 2.6.1-r1, no sound |
|
|
| blackspot wrote: | Hi all,
mine is another "no sound" problem. With everything perfectly configured.
with "perfectly" I mean:
- kernel 2.6.1 with ALSA configured as modules
- alsa-lib and alsa-utils 1.0.1
- /etc/modules.d/alsa OK
- alsasound in the runlevel boot
- of course the card is UNMUTED (correctly unmuted, I'm used to ALSA)
- of course the speakers are working (sound is working with OSS, just it doesn't with ALSA)
- NO ERRORS displayed
- alsaconf detects and configures my card with any problem.
note:
- I've used ALSA since kernel 2.4.10 without problems. It was working 3 weeks ago !!!
- I read how-tos.
- no changes in my hardware.
- I just upgraded my kernel and my alsa-lib & utils.
- now kernel 2.6.1
- intel8x0 chip
I tried to come back to kernel 2.4.x but --> NO SOUND.
I think the problem is around alsa-lib >= 0.9.8 but I can't come back to 0.9.2 because it requires alsa-driver installed ... and I can't install alsa-driver with kernel 2.6.1
what do you think ?
thanks, simone |
Try mm-sources, it has the latest alsa drivers
Use ~x86 to install alsa-lib and alsa-utils, it will give you the latest versions
Don't use alsaconf - edit your /etc/modules.d/alsa by hand, and remember to run update-modules after.
_________________
Jingle Jangle Jewellery |
|
| Back to top |
|
|
blackspot
n00b
Joined: 07 Nov 2002
Posts: 6
Location: /Europe/Italy/Milan
|
| Posted: Wed Jan 21, 2004 10:26 am Post subject: |
|
|
| Quote: |
Try mm-sources, it has the latest alsa drivers
Use ~x86 to install alsa-lib and alsa-utils, it will give you the latest versions
Don't use alsaconf - edit your /etc/modules.d/alsa by hand, and remember to run update-modules after. |
but :
- of course I use ACCEPT_KEYWORDS="~x86"
- of course I edit my /etc/modules.d/alsa by hand and of course I run update-modules.
- of course I tried everything I could read on Gentoo How-To and some things more.
- I run alsaconf just as the last resort
thanks, simone |
|
| Back to top |
|
|
blackspot
n00b
Joined: 07 Nov 2002
Posts: 6
Location: /Europe/Italy/Milan
|
| Posted: Wed Jan 21, 2004 11:08 am Post subject: |
|
|
Hi raab,
| raab wrote: | Ok, basically I followed the same kernel configuration, everything as modules.
Next I emerged alsa-lib-0.9.2.ebuild, then alsa-utils-0.9.2.ebuild, ran alsamixer increased the master volume to 100, started kde and sound worked.. |
I have a lot of problems compiling alsa-lib-0.9.2 & alsa-utils-0.9.2 with 2.6.x kernel ....
I think because they requires the alsa-drivers & the kernel-2.4.x tree ...
any suggestion ?
tnx |
|
| Back to top |
|
|
blackspot
n00b
Joined: 07 Nov 2002
Posts: 6
Location: /Europe/Italy/Milan
|
| Posted: Wed Jan 21, 2004 12:06 pm Post subject: Re: ALSA configured, kernel 2.6.1-r1, no sound |
|
|
| agent_jdh wrote: |
Try mm-sources, it has the latest alsa drivers
|
I did it right now, but no sound.
the dmesg output is:
| Code: |
intel8x0_measure_ac97_clock: measured 49337 usecs
intel8x0: clocking to 48000
request_module: failed /sbin/modprobe -- char-major-226-0. error = 256
|
what about RTC support in ALSA ? I tried Y & N ...
please help ...
tnx, simone |
|
| Back to top |
|
|
agent_jdh
Veteran
Joined: 08 Aug 2002
Posts: 1783
Location: Scotland
|
| Posted: Thu Jan 22, 2004 11:26 am Post subject: Re: ALSA configured, kernel 2.6.1-r1, no sound |
|
|
| blackspot wrote: | | agent_jdh wrote: |
Try mm-sources, it has the latest alsa drivers
|
I did it right now, but no sound.
the dmesg output is:
| Code: |
intel8x0_measure_ac97_clock: measured 49337 usecs
intel8x0: clocking to 48000
request_module: failed /sbin/modprobe -- char-major-226-0. error = 256
|
what about RTC support in ALSA ? I tried Y & N ...
please help ...
tnx, simone |
RTC support shouldn't make a difference, and try to stay away from any alsa stuff < 0.9.7
I've only set up one Linux box using the 8x0 alsa driver and that was over a year ago. iirc there are many different implementations of this hardware, and I'm sure I've seen boot errors w.r.t. the clock/timing before as well. It could be that your particular mobo sound is not supported properly - you might be better off asking questions on the alsa-user mailing, or the linux kernel mailing list since alsa is in the kernel. There may be an alsa module parameter you can pass to it which would force the issue, but I don't know.
_________________
Jingle Jangle Jewellery |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
