| View previous topic :: View next topic |
| Author |
Message |
Niko of Death
n00b
Joined: 25 Nov 2015
Posts: 4
|
 Posted: Tue Mar 14, 2017 1:34 am Post subject: USB Audio device not working |
 |
|
I use a Sound Blaster X7 usb dac/amp for my speakers and headphones on my PC, however it is currently not working with my Gentoo installation, using ALSA/Pulseaudio. If I have it powered on/connected, on boot I get stuck on "restoring mixer levels" with various alsactl errors popping up. If I wait for those to finish, or reenable the device after turning it off, in X11 terminals and most programs do not load. Here are the relevant parts of dmesg:
| Code: | [ 2.517285] usb 5-1.4: Product: Sound Blaster X7
[ 2.517286] usb 5-1.4: Manufacturer: Creative Technology Ltd
[ 2.530761] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
[ 2.530762] usb 5-1.4: 21:0: cannot get min/max values for control 5 (id 21)
[ 2.531261] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
[ 2.531262] usb 5-1.4: 21:0: cannot get min/max values for control 6 (id 21)
[ 2.532727] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x702, wIndex = 0x1500, type = 4
[ 2.532727] usb 5-1.4: 21:0: cannot get min/max values for control 7 (id 21)
[ 2.533349] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x804, wIndex = 0x1500, type = 4
[ 2.533349] usb 5-1.4: 21:0: cannot get min/max values for control 8 (id 21)
[ 2.534818] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x904, wIndex = 0x1500, type = 4
[ 2.534819] usb 5-1.4: 21:0: cannot get min/max values for control 9 (id 21)
[ 2.535484] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xa01, wIndex = 0x1500, type = 4
[ 2.535485] usb 5-1.4: 21:0: cannot get min/max values for control 10 (id 21)
[ 2.537086] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xb02, wIndex = 0x1500, type = 4
[ 2.537088] usb 5-1.4: 21:0: cannot get min/max values for control 11 (id 21)
[ 2.537953] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xc03, wIndex = 0x1500, type = 4
[ 2.537955] usb 5-1.4: 21:0: cannot get min/max values for control 12 (id 21)
[ 2.539484] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xd05, wIndex = 0x1500, type = 4
[ 2.539486] usb 5-1.4: 21:0: cannot get min/max values for control 13 (id 21)
[ 2.540109] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xe01, wIndex = 0x1500, type = 4
[ 2.540111] usb 5-1.4: 21:0: cannot get min/max values for control 14 (id 21)
[ 2.541637] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0xf01, wIndex = 0x1500, type = 4
[ 2.541639] usb 5-1.4: 21:0: cannot get min/max values for control 15 (id 21)
[ 2.542244] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x1003, wIndex = 0x1500, type = 4
[ 2.542245] usb 5-1.4: 21:0: cannot get min/max values for control 16 (id 21)
[ 2.544265] random: crng init done
[ 2.551877] usb 5-1.4: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
[ 2.551878] usb 5-1.4: 21:0: cannot get min/max values for control 5 (id 21) |
It has not always been this way, as it has worked just fine in the past, but there has been no apparent reason for the problem disappearing or reappearing (I.E. no kernel change, program installation etc. seems to affect it either way).
I'm running the latest 4.10.2 kernel with the USB Sound Devices and USB Audio/MIDI driver kernel options selected.
I should also note that a similar device, my sound blaster E5, works perfectly fine (boots properly, sound works through headphones, though volume wheel is not functional)
EDIT: Trying the X7 in the same usb port I used the E5, it now works! Is there any way to tell what is causing this so I can use the old port? |
|
| Back to top |
|
 |
Roman_Gruber
Advocate
Joined: 03 Oct 2006
Posts: 3846
Location: Austro Bavaria
|
| Posted: Fri Mar 24, 2017 1:18 am Post subject: |
|
|
Check if there is a physical defect? if those ports are the same hardware wise? sometimes you have an additional chipset for extra ports on your mainboard, ...
check your kernel options for usb.... |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54809
Location: 56N 3W
|
| Posted: Fri Mar 24, 2017 9:38 am Post subject: |
|
|
Niko of Death,
Set up your USB the way you want it to work.
Put lsusb -v onto a pastebin site
Put your kernel .config onto a pastebin site and post both links.
Neither output will fit into a post.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
