| View previous topic :: View next topic |
| Author |
Message |
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
 Posted: Sat Mar 31, 2018 9:43 pm Post subject: [Risolto] kernel senza ausilio di initramfs |
 |
|
Ciao; la mia domanda per molti è sicuramente "banale" ; attualmente sto usando Gentoo senza initramfs sfruttando come base un kernel-config di un mio conoscente.
Purtroppo però, non riesco a capire dove diavolo mettere le cose come "built in" se per esempio dovessi compilare Gentoo su altro computer quindi con caratteristiche hardware diverse.
Poco fa ho messo tutto il possibile riguardo SCSI drivers come built-in ma ... kernel panic ovvero non partiva.
Chiedo umilmente se potete darmi "ragguagli" su come "operare" in modo "metodico".
Grazie ^^
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato 
Last edited by ciro64 on Fri Apr 06, 2018 6:00 pm; edited 1 time in total |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31348
Location: here
|
| Posted: Sun Apr 01, 2018 7:39 am Post subject: |
|
|
Solitamente senza initramfs devi aggiungere built i vari controller e soprattutto il driver per il file system che usi.
Posta l'errore che ti da e anche l'output di lspci -v
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Tue Apr 03, 2018 5:47 pm Post subject: |
|
|
| Code: |
ci74771ht ~ # lspci -v
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: de000000-df0fffff [size=17M]
Prefetchable memory behind bridge: 00000000d0000000-00000000d9ffffff [size=160M]
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Capabilities: [d94] #19
Kernel driver in use: pcieport
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 28
Memory at df320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family ME Interface
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at df33a000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei_me
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-V
Subsystem: ASUSTeK Computer Inc. Ethernet Connection (2) I218-V
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at df300000 (32-bit, non-prefetchable) [size=128K]
Memory at df338000 (32-bit, non-prefetchable) [size=4K]
I/O ports at f040 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at df337000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at df330000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: None
Memory behind bridge: None
Prefetchable memory behind bridge: None
Capabilities: [40] Express Root Port (Slot-), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family PCI Express Root Port 1
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d0) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: None
Memory behind bridge: df200000-df2fffff [size=1M]
Prefetchable memory behind bridge: None
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. 82801 PCI Bridge
Capabilities: [a0] Power Management version 3
00:1c.7 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 8 (rev d0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: None
Memory behind bridge: df100000-df1fffff [size=1M]
Prefetchable memory behind bridge: None
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family PCI Express Root Port 8
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at df336000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family Z97 LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SATA Controller [AHCI Mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 26
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f070 [size=8]
I/O ports at f060 [size=4]
I/O ports at f020 [size=32]
Memory at df335000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SMBus Controller
Flags: medium devsel, IRQ 18
Memory at df334000 (64-bit, non-prefetchable) [size=256]
I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GK106 [GeForce GTX 660]
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=128M]
Memory at d8000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GK106 HDMI Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at df080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: None
Memory behind bridge: df200000-df2fffff [size=1M]
Prefetchable memory behind bridge: None
Capabilities: [c0] Subsystem: ASUSTeK Computer Inc. ASM1083/1085 PCIe to PCI Bridge
04:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Subsystem: Avermedia Technologies Inc DVB-T Super 007
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at df200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134
05:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros AR9485 Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at df100000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at df180000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k
|
Usando un differente .config da me creato:
All'avvio kernel panic dovuto appunto a "qualcosa" che non è "built-in" e che mi sfugge.
Attualmente sto usando un kernel config che funziona senza initramfs .... appunto "elaborato su una base che mi è stata data da un Gentooista che provai e funziona.
Però il mio è stato un "copiare" senza "consapevolezza" riguardo il perchè funziona.
Se tento io ... tentando di costruire ex-novo un config-file per kernel, qualcosa mi sfugge ed ottengo errore. Purtroppo non riesco da solo a capire cosa.
Scusa la mia ignoranza 
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Tue Apr 03, 2018 6:00 pm Post subject: |
|
|
Scusa doppio post .....
Forse ho capito :
| Code: |
ci74771ht ~ # zgrep -i ahci /proc/config.gz
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_ACARD_AHCI is not set
|
E' quello che funziona;
| Code: |
ci74771ht ~ # grep -i ahci /home/cst_config
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_ACARD_AHCI=m
ci74771ht ~ #
|
Questo quello che non funziona.
Può davvero essere colpa di questa imp'ostazione il risultato dei miei fallimenti ?  
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato
Last edited by ciro64 on Tue Apr 03, 2018 6:29 pm; edited 1 time in total |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31348
Location: here
|
| Posted: Tue Apr 03, 2018 6:09 pm Post subject: |
|
|
| ciro64 wrote: | | Può davvero essere colpa di questa imp'ostazione il risultato dei miei fallimenti ? |
Piu' che possibile se hai un controller sata.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Tue Apr 03, 2018 7:44 pm Post subject: |
|
|
No ... non è solo quello 
Purtroppo non riesco a risolvere l'arzigogolo
fare un diff fra configurazioni differenti è un "macello".
Attualmente son con questo kernel:
| Code: |
$ uname -a
Linux ci74771ht 4.9.76-gentoo-r1 #1 SMP PREEMPT Tue Apr 3 23:21:40 CEST 2018 x86_64 Intel(R) Core(TM) i7-4771 CPU @ 3.50GHz GenuineIntel GNU/Linux
|
Che funziona bene (e senza initramfs).
Ora scarico le vanilla-sources-4.15.15, quindi con il ".config" di default (che non riesce a partire da solo senza l'ausilio di initramfs).
Non tocco nulla; cosa dovrei fare/guardare/controllare/modificare per far si che esso non debba aver necessità di initramfs ?
Scusate se sono una "seccatuira"
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato
Last edited by ciro64 on Tue Apr 03, 2018 10:46 pm; edited 1 time in total |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Tue Apr 03, 2018 10:41 pm Post subject: |
|
|
Mi correggo ... ho già cominciato ad inserire qualcosa come "built-in" ... ma il risultato è sempre un "panic":
immagine2
kernel-config (vanilla 4.15.15)
Se c'è un aiuto Grazie infinite.
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31348
Location: here
|
| Posted: Wed Apr 04, 2018 6:02 am Post subject: |
|
|
Puoi anche postare la configurazione delle tue partizioni (il tuo /etc/fstab)?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Wed Apr 04, 2018 3:35 pm Post subject: |
|
|
Certamente
| Code: |
/dev/sdb1 /boot ext4 noatime 1 2
/dev/sdb2 none swap sw 0 0
/dev/sdb3 / ext4 noatime 0 1
/dev/sdb5 /home ext4 noatime 1 2
/dev/sdb6 /mnt/Volume ntfs-3g defaults 0 0
#/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
shm /dev/shm tmpfs defaults 0 0
tmpfs /var/tmp/portage tmpfs gid=portage,uid=portage,mode=755 0 0
|
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato |
|
| Back to top |
|
|
ciro64
Guru
Joined: 20 Jun 2009
Posts: 424
|
| Posted: Fri Apr 06, 2018 5:58 pm Post subject: |
|
|
Ok ... la "manna" mi è arrivata dal "cielo" ^^
Ho provato sia partendo dalla mia distro in chroot che partendo dal livecd "gentoo minimal" ... e funziona ^^^^^^^^^^^^^^^^^ 
| Code: |
# make localyesconfig
|
è stato risolutivo ^^
PS: davvero gran bella utility ^^
_________________
Gentoo: il sistema più eclettico e geniale che abbia mai provato |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian) 
