| View previous topic :: View next topic |
| Author |
Message |
depontius
Advocate
Joined: 05 May 2004
Posts: 3522
|
 Posted: Tue Mar 20, 2018 12:40 am Post subject: |
 |
|
Did brief battle again tonight. If I add USE=opencl mandelbulber fails to build because cl.hpp is a dangling symlink. So after looking through this thread a bit more, I installed opencl-clhpp from the science overlay. I know there is a fixed version in the zucca overlay, but it's not in stock layman and I didn't feel like looking up the pointer to it - yet. Anyway, the stock installation from science overlay drops the files in /usr/include/CL - not where they're being looked for. So I added a few symlinks:
| Code: | # ls -l /usr/include/CL
total 0
lrwxrwxrwx 1 root root 15 Mar 19 20:28 cl2.hpp -> /usr/CL/cl2.hpp
lrwxrwxrwx 1 root root 49 Mar 17 22:16 cl_egl.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl_egl.h
lrwxrwxrwx 1 root root 49 Mar 17 22:16 cl_ext.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl_ext.h
lrwxrwxrwx 1 root root 52 Mar 17 22:16 cl_gl_ext.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl_gl_ext.h
lrwxrwxrwx 1 root root 48 Mar 17 22:16 cl_gl.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl_gl.h
lrwxrwxrwx 1 root root 45 Mar 17 22:16 cl.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl.h
lrwxrwxrwx 1 root root 14 Mar 19 20:28 cl.hpp -> /usr/CL/cl.hpp
lrwxrwxrwx 1 root root 43 Feb 25 19:56 cl.hpp-orig -> ../../lib64/OpenCL/global/include/CL/cl.hpp
lrwxrwxrwx 1 root root 54 Mar 17 22:16 cl_platform.h -> //usr/lib64/OpenCL/global/include/CL-1.2/cl_platform.h
lrwxrwxrwx 1 root root 49 Mar 17 22:16 opencl.h -> //usr/lib64/OpenCL/global/include/CL-1.2/opencl.h |
With this, mandelbulber builds. But as soon as I go into preferences and try to enable OpenCL, it segfaults. Soon I'll look a bit harder and get the zucca version of opencl-clhpp and see if that's any better. Enough fiddling for tonight. I don't stay up as late as I used to.
_________________
.sigs waste space and bandwidth |
|
| Back to top |
|
 |
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3759
Location: Rasi, Finland
|
| Posted: Tue Mar 20, 2018 10:00 am Post subject: |
|
|
| depontius wrote: | | Soon I'll look a bit harder and get the zucca version of opencl-clhpp and see if that's any better. |
It's not any better than your current manual symlinking. :( It only has -DCMAKE_INSTALL_PREFIX adjusted correctly so that the files get installed into the right directory.
_________________
..: Zucca :..
| My gentoo installs: | init=/sbin/openrc-init
-systemd -logind -elogind seatd |
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
depontius
Advocate
Joined: 05 May 2004
Posts: 3522
|
| Posted: Tue Mar 20, 2018 7:40 pm Post subject: |
|
|
| Zucca wrote: | | depontius wrote: | | Soon I'll look a bit harder and get the zucca version of opencl-clhpp and see if that's any better. |
It's not any better than your current manual symlinking.  It only has -DCMAKE_INSTALL_PREFIX adjusted correctly so that the files get installed into the right directory. |
Are you able to run mandelbulber with OpenCL on your setup? I don't think of eselect stuff as really being "in the path" more setting the paths for other packages. With that, the big difference I see between us is that you're getting ocl-icd from gentoo-gpu and I'm getting it from the base.
_________________
.sigs waste space and bandwidth |
|
| Back to top |
|
|
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3759
Location: Rasi, Finland
|
| Posted: Sun Apr 29, 2018 8:39 pm Post subject: |
|
|
This topic somehow got buried. :|
| depontius wrote: | | Are you able to run mandelbulber with OpenCL on your setup? I don't think of eselect stuff as really being "in the path" more setting the paths for other packages. With that, the big difference I see between us is that you're getting ocl-icd from gentoo-gpu and I'm getting it from the base. |
Yes. I can use OpenCL with every program I have installed which uses it.
_________________
..: Zucca :..
| My gentoo installs: | init=/sbin/openrc-init
-systemd -logind -elogind seatd |
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
kanyck
n00b
Joined: 06 Jan 2013
Posts: 28
|
| Posted: Tue May 08, 2018 7:56 am Post subject: |
|
|
Hi!
| Zucca wrote: | This topic somehow got buried.  |
Not yet. I have exactly the same problem with fresh 18.10
Previously I tried 17.XX, they *almost* work, but produced artifacts (looking much alike a corrupted memory) on my Cape Verde GCN 1.0 card with darktable and all other apps I tried.
After the upgrade I got
| Code: | | Number of platforms 0 |
no matter what I tried...
Everything looks just fine but doesn't work... |
|
| Back to top |
|
|
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3759
Location: Rasi, Finland
|
| Posted: Tue May 08, 2018 7:06 pm Post subject: |
|
|
I'm in the middle of a huge rebuild process (and qt5 causing many blockers). After I've adjusted all the USE -flags and rebuilt many packages I'll see if I stuble upon any problems mentioned in this trhead and then try to create a solution for it.
_________________
..: Zucca :..
| My gentoo installs: | init=/sbin/openrc-init
-systemd -logind -elogind seatd |
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
kanyck
n00b
Joined: 06 Jan 2013
Posts: 28
|
|
| Back to top |
|
|
Ant P.
Watchman
Joined: 18 Apr 2009
Posts: 6920
|
| Posted: Wed May 09, 2018 12:39 am Post subject: |
|
|
I'm bored so I gave this a try. Getting the same 0 platforms thing.
Sequence of events so far:
- Rebuilt my system with USE=opencl globally (no amdgpu-pro at this point)
- Verified that clinfo detects my GPU (a RX550)
- Verified that clover runs exactly zero interesting opencl programs
- Installed amdgpu-pro-opencl-17.50-511655 (after doing a bunch of dodgy stuff I found in a web search[1] to obtain the distfile because it's been hidden from their site)
- eselect opencl set ocl-icd, verified /usr/include/CL/ is in order
- clinfo now returns nothing.
But: running it in strace, I can see it looking for amdoclsc64.so. The amdgpu-pro package didn't install that, and it doesn't seem to be present inside any of the .deb files within. Maybe that's the source of everyone's problem here?
| [1]: | cd $DISTDIR
wget https://www2.ati.com/drivers/linux/ubuntu/amdgpu-pro-17.50-511655.tar.xz --referer http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Linux-Release-Notes.aspx |
|
|
| Back to top |
|
|
kanyck
n00b
Joined: 06 Jan 2013
Posts: 28
|
| Posted: Wed May 09, 2018 6:21 am Post subject: |
|
|
18.10 doesn't have this file either. However they've changed some names. Here's my /opt/amdgpu with amdgpu-pro-opencl-18.10 installed:
| Code: | [kanyck: ~]$ tree /opt/amdgpu/
/opt/amdgpu/
├── lib64
│ ├── libamdocl64.so
│ ├── libdrm_amdgpu.so.1 -> libdrm_amdgpu.so.1.0.0
│ └── libdrm_amdgpu.so.1.0.0
└── share
└── libdrm
└── amdgpu.ids
|
BTW I wander if there's a place to file bugs for amdgpu-pro. I tried few usual places, like kernel.org and freedesktop's bugzillas with no apparent success -- they all were ignored for months. On phoronix bridgman encouraged people to file bugs but never discovered where to, even being asked explicitly. And very few chances are to get help on phoronix, too. Meanwhile there are some things, like env vars, to be set to get apps working. Setting the following moved me one step further when I attempted this issue last time few months ago:
| Code: | export GPU_FORCE_64BIT_PTR=1
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=90
export GPU_SINGLE_ALLOC_PERCENT=90
export GPU_MAX_HEAP_SIZE=90 |
I've found this on forums, but couldn't trace where those came from, neither if there are some other important things to get it working... |
|
| Back to top |
|
|
xdarma
l33t
Joined: 08 Dec 2003
Posts: 720
Location: tra veneto e friuli (italy)
|
| Posted: Tue May 15, 2018 7:45 pm Post subject: |
|
|
| kanyck wrote: |
BTW I wander if there's a place to file bugs for amdgpu-pro. I tried few usual places, like kernel.org and freedesktop's bugzillas with no apparent success -- they all were ignored for months. On phoronix bridgman encouraged people to file bugs but never discovered where to, even being asked explicitly. And very few chances are to get help on phoronix, too.
|
At the bottom of driver download page, there is a link: AMD Issue Reporting Form
A place with some information: AMD Support Community
_________________
proud user of faKeDE-4.7.3 -> back to windowmaker -> moved to LXQt |
|
| Back to top |
|
|
kanyck
n00b
Joined: 06 Jan 2013
Posts: 28
|
| Posted: Wed May 16, 2018 6:13 am Post subject: |
|
|
Oh! Thanks! I've never scrolled down that far  |
|
| Back to top |
|
|
depontius
Advocate
Joined: 05 May 2004
Posts: 3522
|
| Posted: Thu May 17, 2018 7:04 pm Post subject: |
|
|
I haven't had time to fiddle with this for quite a while, though someday I'll get back to it. In the meantime, I saw this on Phoronix the other day, which seems relevant to this discussion. The comments are worth checking out, too.
https://www.phoronix.com/scan.php?page=news_item&px=ROCm-PAL-Future
_________________
.sigs waste space and bandwidth |
|
| Back to top |
|
|
azp
Guru
Joined: 16 Nov 2003
Posts: 456
Location: Sweden
|
| Posted: Mon Jun 18, 2018 2:59 pm Post subject: |
|
|
Has anybody tried the getting OpenCL working with the 18.20 drivers yet? I modified an ebuild to fetch the new package, but I can't get it working. I get "Number of platforms 0" when I run clinfo.
| Code: | peter@skare ~ $ ll /opt/amdgpu/lib64/
total 70M
-rwxr-xr-x 1 root root 70M 17 jun 20.53 libamdocl64.so*
lrwxrwxrwx 1 root root 22 17 jun 20.53 libdrm_amdgpu.so.1 -> libdrm_amdgpu.so.1.0.0*
-rwxr-xr-x 1 root root 55K 17 jun 20.53 libdrm_amdgpu.so.1.0.0*
lrwxrwxrwx 1 root root 15 17 jun 20.53 libdrm.so.2 -> libdrm.so.2.4.0*
-rwxr-xr-x 1 root root 83K 17 jun 20.53 libdrm.so.2.4.0*
lrwxrwxrwx 1 root root 15 17 jun 20.53 libkms.so.1 -> libkms.so.1.0.0*
-rwxr-xr-x 1 root root 15K 17 jun 20.53 libkms.so.1.0.0*
peter@skare ~ $ ll /opt/amdgpu/share/libdrm/
total 8,0K
-rw-r--r-- 1 root root 5,8K 17 jun 20.53 amdgpu.ids
peter@skare ~ $ eselect opencl list
Available OpenCL implementations:
[1] mesa
[2] ocl-icd * |
_________________
Weeks of coding can save you hours of planning.
Last edited by azp on Mon Jun 25, 2018 7:34 pm; edited 1 time in total |
|
| Back to top |
|
|
happysmash27
Apprentice
Joined: 28 Mar 2016
Posts: 220
|
| Posted: Thu Jun 21, 2018 3:48 am Post subject: |
|
|
| I have, but I have the exact same problem :/ |
|
| Back to top |
|
|
bloodyTribology
n00b
Joined: 28 Jun 2018
Posts: 4
Location: UK
|
| Posted: Thu Jun 28, 2018 12:05 pm Post subject: |
|
|
| azp wrote: | Has anybody tried the getting OpenCL working with the 18.20 drivers yet? I modified an ebuild to fetch the new package, but I can't get it working. I get "Number of platforms 0" when I run clinfo.
|
With the ebuild added to the in the main repo on the 24th of Jun, openCL seems to work using Darktable's openCL test and can be enabled from it's options. I built mesa without openCL support so you may need to do that. |
|
| Back to top |
|
|
azp
Guru
Joined: 16 Nov 2003
Posts: 456
Location: Sweden
|
| Posted: Sat Jun 30, 2018 6:04 pm Post subject: |
|
|
| bloodyTribology wrote: | | azp wrote: | Has anybody tried the getting OpenCL working with the 18.20 drivers yet? I modified an ebuild to fetch the new package, but I can't get it working. I get "Number of platforms 0" when I run clinfo.
|
With the ebuild added to the in the main repo on the 24th of Jun, openCL seems to work using Darktable's openCL test and can be enabled from it's options. I built mesa without openCL support so you may need to do that. |
Do you disable the opencl use-flag globally, or just for Mesa? I have a problem where Blender/Darktable/etc are pulling in OpenCL on Mesa, since they have enabled opencl flags, even though I've disabled it specifically for Mesa.
_________________
Weeks of coding can save you hours of planning. |
|
| Back to top |
|
|
depontius
Advocate
Joined: 05 May 2004
Posts: 3522
|
| Posted: Sat Jun 30, 2018 8:17 pm Post subject: |
|
|
Fascinating...
A month or two back I installed amd-gpupro-opencl-17.xxxxx. It responded to clinfo OK, but I wasn't actually able to do anything with it. I installed Mandelbulber just to try it out, and whenever I tried enabling opencl, it crashed.
More recently I recompiled my whole system with gcc-7.3, and amd-gpupro-opencl failed to build, but since it never worked in the first place, I never got around to debugging it.
Seeing this, I decided to try amd-gpupro-opencl-18.xxxxx. It compiled OK, and it works! Picking one of their examples, rendering on just the CPU takes about 9.3 seconds. Enabling OpenCL, the first render takes 1.7 seconds, with some of that time spent "compiling OpenCL programs". Subsequent renderings take 0.6 seconds.
_________________
.sigs waste space and bandwidth |
|
| Back to top |
|
|
azp
Guru
Joined: 16 Nov 2003
Posts: 456
Location: Sweden
|
| Posted: Sun Jul 01, 2018 1:05 am Post subject: |
|
|
| depontius wrote: | Fascinating...
A month or two back I installed amd-gpupro-opencl-17.xxxxx. It responded to clinfo OK, but I wasn't actually able to do anything with it. I installed Mandelbulber just to try it out, and whenever I tried enabling opencl, it crashed.
More recently I recompiled my whole system with gcc-7.3, and amd-gpupro-opencl failed to build, but since it never worked in the first place, I never got around to debugging it.
Seeing this, I decided to try amd-gpupro-opencl-18.xxxxx. It compiled OK, and it works! Picking one of their examples, rendering on just the CPU takes about 9.3 seconds. Enabling OpenCL, the first render takes 1.7 seconds, with some of that time spent "compiling OpenCL programs". Subsequent renderings take 0.6 seconds. |
What does clinfo tell you now?
_________________
Weeks of coding can save you hours of planning. |
|
| Back to top |
|
|
depontius
Advocate
Joined: 05 May 2004
Posts: 3522
|
| Posted: Sun Jul 01, 2018 2:29 am Post subject: |
|
|
| Code: | $ clinfo
Number of platforms 1
Platform Name AMD Accelerated Parallel Processing
Platform Vendor Advanced Micro Devices, Inc.
Platform Version OpenCL 2.1 AMD-APP (2639.3)
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_icd cl_amd_event_callback cl_amd_offline_devices
Platform Host timer resolution 1ns
Platform Extensions function suffix AMD
Platform Name AMD Accelerated Parallel Processing
Number of devices 1
Device Name Spectre
Device Vendor Advanced Micro Devices, Inc.
Device Vendor ID 0x1002
Device Version OpenCL 1.2 AMD-APP (2639.3)
Driver Version 2639.3
Device OpenCL C Version OpenCL C 1.2
Device Type GPU
Device Board Name (AMD) AMD Radeon Graphics
Device Topology (AMD) PCI-E, 00:01.0
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Linker Available Yes
Max compute units 8
SIMD per compute unit (AMD) 4
SIMD width (AMD) 16
SIMD instruction width (AMD) 1
Max clock frequency 720MHz
Graphics IP (AMD) 7.1
Device Partition (core)
Max number of sub-devices 8
Supported partition types (n/a)
Supported affinity domains (n/a)
Max work item dimensions 3
Max work item sizes 1024x1024x1024
Max work group size 256
Preferred work group size (AMD) 256
Max work group size (AMD) 1024
Preferred work group size multiple 64
Wavefront width (AMD) 64
Preferred / native vector sizes
char 4 / 4
short 2 / 2
int 1 / 1
long 1 / 1
half 1 / 1 (n/a)
float 1 / 1
double 1 / 1 (cl_khr_fp64)
Half-precision Floating-point support (n/a)
Single-precision Floating-point support (core)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Correctly-rounded divide and sqrt operations Yes
Double-precision Floating-point support (cl_khr_fp64)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Address bits 64, Little-Endian
Global memory size 2638061568 (2.457GiB)
Global free memory (AMD) 4109604 (3.919GiB)
Global memory channels (AMD) 4
Global memory banks per channel (AMD) 8
Global memory bank width (AMD) 256 bytes
Error Correction support No
Max memory allocation 1369020825 (1.275GiB)
Unified memory for Host and Device Yes
Minimum alignment for any data type 128 bytes
Alignment of base address 2048 bits (256 bytes)
Global Memory cache type Read/Write
Global Memory cache size 16384 (16KiB)
Global Memory cache line size 64 bytes
Image support Yes
Max number of samplers per kernel 16
Max size for 1D images from buffer 134217728 pixels
Max 1D or 2D image array size 2048 images
Base address alignment for 2D image buffers 256 bytes
Pitch alignment for 2D image buffers 256 pixels
Max 2D image size 16384x16384 pixels
Max 3D image size 2048x2048x2048 pixels
Max number of read image args 128
Max number of write image args 8
Local memory type Local
Local memory size 32768 (32KiB)
Local memory syze per CU (AMD) 65536 (64KiB)
Local memory banks (AMD) 32
Max number of constant args 8
Max constant buffer size 1369020825 (1.275GiB)
Preferred constant buffer size (AMD) 16384 (16KiB)
Max size of kernel argument 1024
Queue properties
Out-of-order execution No
Profiling Yes
Prefer user sync for interop Yes
Profiling timer resolution 1ns
Profiling timer offset since Epoch (AMD) 1530351041009569074ns (Sat Jun 30 05:30:41 2018)
Execution capabilities
Run OpenCL kernels Yes
Run native kernels No
Thread trace supported (AMD) Yes
Number of async queues (AMD) 2
Max real-time compute queues (AMD) 0
Max real-time compute units (AMD) 0
SPIR versions 1.2
printf() buffer size 4194304 (4MiB)
Built-in kernels (n/a)
Device Extensions cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_gl_sharing cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_image2d_from_buffer cl_khr_spir cl_khr_gl_event
NULL platform behavior
clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) AMD Accelerated Parallel Processing
clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [AMD]
clCreateContext(NULL, ...) [default] Success [AMD]
clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) Success (1)
Platform Name AMD Accelerated Parallel Processing
Device Name Spectre
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) Success (1)
Platform Name AMD Accelerated Parallel Processing
Device Name Spectre
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) Success (1)
Platform Name AMD Accelerated Parallel Processing
Device Name Spectre
ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.2.11
ICD loader Profile OpenCL 2.1 |
_________________
.sigs waste space and bandwidth |
|
| Back to top |
|
|
bloodyTribology
n00b
Joined: 28 Jun 2018
Posts: 4
Location: UK
|
| Posted: Sun Jul 01, 2018 3:48 pm Post subject: |
|
|
| azp wrote: | | Do you disable the opencl use-flag globally, or just for Mesa? I have a problem where Blender/Darktable/etc are pulling in OpenCL on Mesa, since they have enabled opencl flags, even though I've disabled it specifically for Mesa. |
I have -opencl specifically on Mesa; after amdgpu-pro-opencl is installed darktable shoudn't try and pull it in from Mesa. |
|
| Back to top |
|
|
azp
Guru
Joined: 16 Nov 2003
Posts: 456
Location: Sweden
|
| Posted: Sun Jul 01, 2018 8:26 pm Post subject: |
|
|
| bloodyTribology wrote: | | azp wrote: | | Do you disable the opencl use-flag globally, or just for Mesa? I have a problem where Blender/Darktable/etc are pulling in OpenCL on Mesa, since they have enabled opencl flags, even though I've disabled it specifically for Mesa. |
I have -opencl specifically on Mesa; after amdgpu-pro-opencl is installed darktable shoudn't try and pull it in from Mesa. |
Hm, mine does. It specifically needs Mesa with opencl flag, according to portage. But perhaps it wasn't because of darktable but because I have the global opencl use flag enabled.
_________________
Weeks of coding can save you hours of planning. |
|
| Back to top |
|
|
bloodyTribology
n00b
Joined: 28 Jun 2018
Posts: 4
Location: UK
|
| Posted: Mon Jul 02, 2018 1:03 pm Post subject: |
|
|
| azp wrote: | | Hm, mine does. It specifically needs Mesa with opencl flag, according to portage. But perhaps it wasn't because of darktable but because I have the global opencl use flag enabled. |
Just checked, and I don't have opencl in my make.conf. It is in my package.use/darktable though. |
|
| Back to top |
|
|
azp
Guru
Joined: 16 Nov 2003
Posts: 456
Location: Sweden
|
| Posted: Mon Jul 02, 2018 6:21 pm Post subject: |
|
|
| bloodyTribology wrote: | | azp wrote: | | Hm, mine does. It specifically needs Mesa with opencl flag, according to portage. But perhaps it wasn't because of darktable but because I have the global opencl use flag enabled. |
Just checked, and I don't have opencl in my make.conf. It is in my package.use/darktable though. |
That's weird. I just disabled my global opencl use flag, and enabled it only for Blender and Darktable. But when running "emerge -uDN world" I still get:
| Code: | The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by virtual/opencl-0-r5::gentoo
# required by media-gfx/darktable-2.4.4::gentoo
# required by @selected
# required by @world (argument)
>=media-libs/mesa-18.1.2 opencl |
so it seems Darktable is still pulling it in.
It doesn't seem than opencl or anything else depends on amdgpu-pro-opencl yet.
| Code: | root@skare$ equery depends amdgpu-pro-opencl
* These packages depend on amdgpu-pro-opencl:
root@skare$ |
_________________
Weeks of coding can save you hours of planning. |
|
| Back to top |
|
|
ali3nx
l33t
Joined: 21 Sep 2003
Posts: 732
Location: Winnipeg, Canada
|
| Posted: Sat Jul 07, 2018 1:07 am Post subject: |
|
|
Just a heads up clinfo ebuilds will not build unless mesa is built with opencl support. I've submitted a bug for this
https://bugs.gentoo.org/660572
I've managed to install both versions of amdgpu-pro-opencl to test if ether version would function with the big picture goal to get ethminer functional on gentoo using RX480/580 graphics cards without needing the entire amdgpu-pro stack however both clinfo and ethminer reply with No OpenCL platforms found with mesa built with or without opencl support
The 17.50 ebuild for amdgpu-pro-opencl was updated to EAPI-7 but the ebuild itself was not updated to reflect eapi changes with dolib requiring a change to dolib.so and addressing that minor issue the 17.50 ebuild worked perfectly fine.
| Code: | src_install() {
into "/opt/amdgpu"
dolib.so opt/${SUPER_PN}/lib/x86_64-linux-gnu/*
dolib.so opt/amdgpu/lib/x86_64-linux-gnu/*
insinto "/opt/amdgpu"
doins -r opt/amdgpu/share
insinto /etc/OpenCL/vendors/
echo "/opt/amdgpu/$(get_libdir)/libamdocl64.so" > "${SUPER_PN}.icd" || die "Failed to generate ICD file"
doins "${SUPER_PN}.icd"
} |
amdgpu driver's all loaded and eselect opencl is set but still 0 devices found by ethminer or clinfo. I do currently have amdgpu kernel driver built as a module with the firmware being loaded from userland of that matters. The amdgpu graphics cards will all be secondary display devices to the intel igpu with this configuration.
If anyone has a suggestion i'm certainly interested.
| Code: | vargur ~ # clinfo
Number of platforms 0 |
| Code: | vargur /home/xartin/ethminer-0.14.0-Linux # ./ethminer -G --list-devices
▒ 19:13:20|ethminer| No OpenCL platforms found |
| Code: | vargur ~ # eselect opencl list
Available OpenCL implementations:
[1] mesa
[2] ocl-icd * |
One possible discrepancy with the above eselect entries i discovered is there is an icd file added for amdgpu-pro.icd but that listing is not available in eselect opencl. I dont know if this is an eselect config bug with the relevant package that could directly be responsible for opencl compute detection not functioning.
| Code: | vargur ~ # ls -l /etc/OpenCL/vendors/
total 8
-rw-r--r-- 1 root root 33 Jul 6 18:26 amdgpu-pro.icd
-rw-r--r-- 1 root root 47 Jul 6 06:48 ocl-icd.icd
vargur ~ # cat /etc/OpenCL/vendors/amdgpu-pro.icd
/opt/amdgpu/lib64/libamdocl64.so
vargur ~ # cat /etc/OpenCL/vendors/ocl-icd.icd
/usr/lib64/OpenCL/vendors/ocl-icd/libOpenCL.so |
| Code: | 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
Subsystem: Sapphire Technology Limited Radeon RX 570
Kernel modules: amdgpu
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
Subsystem: Sapphire Technology Limited Ellesmere [Radeon RX 580]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev c7)
Subsystem: PC Partner Limited / Sapphire Technology Radeon RX 470/480
Kernel modules: amdgpu
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
Subsystem: PC Partner Limited / Sapphire Technology Ellesmere [Radeon RX 580]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev c7)
Subsystem: PC Partner Limited / Sapphire Technology Radeon RX 470/480
Kernel modules: amdgpu
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
Subsystem: PC Partner Limited / Sapphire Technology Ellesmere [Radeon RX 580]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
06:00.0 USB controller: ASMedia Technology Inc. Device 2142
Subsystem: ASUSTeK Computer Inc. Device 8732
Kernel driver in use: xhci_hcd
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev c7)
Subsystem: PC Partner Limited / Sapphire Technology Ellesmere [Radeon RX 470/480/570/580]
Kernel modules: amdgpu
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
Subsystem: PC Partner Limited / Sapphire Technology Ellesmere [Radeon RX 580]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel |
| Code: | vargur ~ # emerge --info
Portage 2.3.40 (python 3.6.5-final-0, default/linux/amd64/17.0/desktop/plasma/systemd, gcc-7.3.0, glibc-2.26-r7, 4.17.4-gentoo x86_64)
=================================================================
System uname: Linux-4.17.4-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_G4560_@_3.50GHz-with-gentoo-2.4.1
KiB Mem: 8028448 total, 2177992 free
KiB Swap: 2097148 total, 2096380 free
Timestamp of repository gentoo: Fri, 06 Jul 2018 00:30:01 +0000
Head commit of repository gentoo: 615edeecfa74bf1040b12d87c0f0cd5b5a24dce8
sh bash 4.4_p12
ld GNU ld (Gentoo 2.30 p2) 2.30.0
distcc 3.2rc1 x86_64-pc-linux-gnu [disabled]
app-shells/bash: 4.4_p12::gentoo
dev-lang/perl: 5.24.3-r1::gentoo
dev-lang/python: 2.7.14-r1::gentoo, 3.6.5::gentoo
dev-util/cmake: 3.9.6::gentoo
dev-util/pkgconfig: 0.29.2::gentoo
sys-apps/baselayout: 2.4.1-r2::gentoo
sys-apps/sandbox: 2.13::gentoo
sys-devel/autoconf: 2.13::gentoo, 2.69-r4::gentoo
sys-devel/automake: 1.15.1-r2::gentoo
sys-devel/binutils: 2.30-r2::gentoo
sys-devel/gcc: 7.3.0-r3::gentoo
sys-devel/gcc-config: 1.8-r1::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.13::gentoo (virtual/os-headers)
sys-libs/glibc: 2.26-r7::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-max-age: 24
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
sync-rsync-verify-metamanifest: yes
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--with-bdeps y --complete-graph y"
ENV_UNSET="DBUS_SESSION_BUS_ADDRESS DISPLAY PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs candy config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync multilib-strict news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="en"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="10bit 12bit X a52 aac acl acpi activities alsa amd64 berkdb bluetooth bluray branding bzip2 cairo caps cdda cdr cjk cli client conntrack cracklib crypt cryptsetup cups cxx dbus declarative device-mapper dri dts dvd dvdr emboss encode exif fam flac fortran gallium gdbm gif glamor gpm gtk iconv idn iproute2 ipv6 ithreads jpeg kde kipi kwallet lcms ldap libnotify libtirpc lz4 lzma lzo mad mng modules mp3 mp4 mpeg multilib nat ncurses netlink nftables nls nptl ogg opencl opengl openmp openssl opus pam pango pcre pdf phonon pic pie plasma png policykit posix ppds pwquality python qml qt5 rar readline samba sdl seccomp semantic-desktop spell ssl startup-notification svg systemd tcpd theora threads tiff truetype udev udisks unicode upower urandom usb user-session v4l v4l2 vaapi vdpau vorbis vulkan widgets wxwidgets x264 x265 xattr xcb xcomposite xml xv xvid zip zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="ratelimit lbmethod_bybusyness lbmethod_byrequests lbmethod_bytraffic lbmethod_heartbeat http2 cgid unixd authn_core authz_core authz_dbd socache_shmcb apache2_modules_unixd actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status slotmem_shm unique_id userdir usertrack vhost_alias" APACHE2_MPMS="worker" CALLIGRA_FEATURES="karbon plan sheets stage words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes mmx mmxext pclmul popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" CURL_SSL="openssl" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-1" POSTGRES_TARGETS="postgres9_5 postgres10" PYTHON_SINGLE_TARGET="python3_6" PYTHON_TARGETS="python2_7 python3_6" RUBY_TARGETS="ruby23" USERLAND="GNU" VIDEO_CARDS="intel i915 amdgpu radeon radeonsi" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Last edited by ali3nx on Sat Jul 07, 2018 3:29 am; edited 1 time in total |
|
| Back to top |
|
|
candrews
Developer
Joined: 10 Aug 2005
Posts: 162
|
| Posted: Sat Jul 07, 2018 3:10 am Post subject: |
|
|
For what it's worth, all I had to do to get working opencl support was:
* use ~amd64
* use a recent kernel (4.17 is what I'm using)
* use the amdgpu driver
* set the "opencl" use flag globally
* emerge dev-libs/amdgpu-pro-opencl (currently version 18.20.606296)
* make sure "ocl-icd" is selcted in "eselect opencl list"
I'm not using any overlays.
dev-util/clinfo (again, not from any overlays) shows 1 platform named "AMD Accelerated Parallel Processing"
I suspect that there's a lot of cruft left over on systems from before it was this easy as well as some broken stuff being used from overlays. Please try to stick to what's in Gentoo without overlays (if you do find something great from overlay, get it into Gentoo), try to report bugs (thanks for reporting the clinfo one, ali3nx!) and submit PRs to fix things.
_________________
I'm working on a variety of random things throughout Gentoo. |
|
| Back to top |
|
|
|
Gentoo on AMD64
