| View previous topic :: View next topic |
| Author |
Message |
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
 Posted: Fri Jan 10, 2020 7:51 pm Post subject: |
 |
|
This is not "Live" ...
"LRS" keeps the word "Live" ... but I turned it into something different.
Image is writable as a regular system .
It doesn't work to RAM.
You can update,install/uninstall everything ...
Add users ..everything ... You can customize LRS as a Gentoo system
PS : my goal is to have backup/restore tools and other useful tools updated and ready to use
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA
Last edited by sabayonino on Fri Jan 10, 2020 8:47 pm; edited 1 time in total |
|
| Back to top |
|
 |
redblade7
Tux's lil' helper
Joined: 11 Jan 2018
Posts: 106
|
| Posted: Fri Jan 10, 2020 8:47 pm Post subject: |
|
|
| sabayonino wrote: | This is not "Live" ...
"LRS" keeps the word "Live" ... but I turned it into something different.
Image is writable as a regular system .
It doesn't work to RAM.
You can update,install/uninstall everything ...
Add users ..everything ... You can customize LRS as a Gentoo system
PS : my goal is to have backup/restore tools and other useful tools ready to use. |
That's a really bad idea. Especially since your documentation encourages people to create a user account with a password on a "recovery" system people expect to be a "Live" USB. Dangerous.
I haven't tried the new ISO with Rufus yet but hopefully it will be read-only when I do it that way. |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Fri Jan 10, 2020 8:55 pm Post subject: |
|
|
Again ...Never wrote "LiveUSB" or something else..
All images are not "Live".
"ISO" is a container of *.img filesystem It's not a ISO-9660.
(Build for Rufus that I can't test)
LRS (as SystemRescueCD do) run with root privileges.
If you want use LRS for your daily work , it's raccomended to create a regular user as Gentoo wiki explained and restore /etc/inittab
| Quote: | === About ROOT user ===
=================================================================================="
LRS run with ROOT privileges , please pay close attention !!! "
For daily use, creating an underprivileged user is highly recommended .
[ https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Finalizing ]"
Root autologin is invoked by /etc/inittab
# mv /etc/inittab.gentoo /etc/inittab
to reset as default gentoo inittab then create a regular user as explained
to the wiki.
|
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
redblade7
Tux's lil' helper
Joined: 11 Jan 2018
Posts: 106
|
| Posted: Fri Jan 10, 2020 9:04 pm Post subject: |
|
|
| sabayonino wrote: | Again ...Never wrote "LiveUSB" or something else..
All images are not "Live".
"ISO" is a container of *.img filesystem It's not a ISO-9660.
(Build for Rufus that I can't test) |
Taking a look at the ISO file, there's only 3 img files in there. There's no way that will boot when there's no system provided to mount the img files.
If you're going to do it this weird way you might want to stop releasing ISOs and avoid confusion.
(This is already confusing, unless you're old enough to remember floppy disks you probably never heard of a raw image.) |
|
| Back to top |
|
|
redblade7
Tux's lil' helper
Joined: 11 Jan 2018
Posts: 106
|
| Posted: Fri Jan 10, 2020 9:27 pm Post subject: |
|
|
| redblade7 wrote: | | sabayonino wrote: | Again ...Never wrote "LiveUSB" or something else..
All images are not "Live".
"ISO" is a container of *.img filesystem It's not a ISO-9660.
(Build for Rufus that I can't test) |
Taking a look at the ISO file, there's only 3 img files in there. There's no way that will boot when there's no system provided to mount the img files.
If you're going to do it this weird way you might want to stop releasing ISOs and avoid confusion.
(This is already confusing, unless you're old enough to remember floppy disks you probably never heard of a raw image.) |
I think if you're going to provide something to the public which calls itself an ISO but is instead an archive with 3 files only you know how to mount properly, you shouldn't provide an ISO at all. It's less confusing to people who would download a "Linux Live Recovery System ISO" and assume that if it walks like a duck, it is.
Also, you need to make it clear to users in the documentation that this is not normal live recovery media, but a persistent hard drive, and that anything saved during the session (including user accounts, WiFi passwords, and browser cache) will be permanently stored on the USB. Perhaps a good place for this would be right above or below the recommendation that you create a normal user account, and preferably let people know this clearly in the opening message of the thread. |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Fri Jan 10, 2020 11:04 pm Post subject: |
|
|
Thanks for your feedbacks.
Next update:
| Quote: | === INTRO ===
This is my own project to replace SystemRescucecd ISO image. Just for fun.
Anyone can do this.
LRS raw image is bootable on BIOS/UEFI systems running Grub2
It is based on Gentoo AMD64 no-multilib. It was build from stage3
LRS raw image can be installed on any USB/HDD device.
USB/HDD Min size required : >=8 GB (8GB should be tiny , depends on USB chipset)
== About Users data ==
* You can install and update LRS system just like a Gentoo installation.
LRS is persistence. All your data will be stored on the device
included passwords , WiFi passwords , accounts and browser cache etc.
and all system changes will be preserved.
=== Wipe all user data ===
* All user data can be safely deleted running /usr/local/sbin/wipe_users_data.sh
This script going to wipe all users data and fill with zeros all free space.
=== About ROOT user ===
=================================================================================="
LRS run with ROOT privileges , please pay close attention !!! "
For daily use, creating an underprivileged user is highly recommended .
[ https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Finalizing ]"
Root autologin is invoked by /etc/inittab (provided by sys-apps/sysvinit package)
# mv /etc/inittab.gentoo /etc/inittab
to reset as default gentoo inittab then create a regular user as explained
to the wiki.
[...]
|
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
russellD
n00b
Joined: 07 Oct 2014
Posts: 63
Location: 28.5797S,153.338 E
|
| Posted: Sat Jan 11, 2020 8:48 am Post subject: |
|
|
I wasn't able to mount the iso!
extracted it thus:
| Code: |
$ zstd -d -v -c 20200108-2210-LRS.iso.zst -o 20200108-2210-LRS.iso
*** zstd command line interface 64-bits v1.3.7, by Yann Collet ***
20200108-2210-LRS.iso.zst: 8074035200 bytes |
and attempted to mount thus:
| Code: | # sudo mount -t iso9660 -o loop 20200108-2210-LRS.iso /mnt/cdrom
mount: /mnt/cdrom: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error. |
Sorry sabyonino, this is too complex for this n00b! 
I go back to the previous downloaded iso LRS-201908-13 for the rescue USB. |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Sat Jan 11, 2020 12:32 pm Post subject: |
|
|
As I wrote in my previous posts , ISO is not a ISO-9660standard. Built to test with rufus or similar apps that I can't test.
I didn't even plan to release an ISO
ISO was dropped from my DropBox
LRS is a persistent raw image that you can install on USB/HDD from stdout to device. stop.
I wrote some INFO (LRS.info file) how I built LRS.
Nothing to do with a Live ISO that you know
(something like Raspeberry PI images)
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Tue Jan 28, 2020 11:27 am Post subject: |
|
|
New daily releases are available on my DropBox (see my signature)
Changelog
| Code: | ============ 20200127-0905 ============
Add :
* sys-devel/llvm-9.0.1
Major Updates :
* app-antivirus/clamav-0.102.1-r3 [0.101.4]
* app-arch/file-roller-3.32.3 [3.32.2-r1]
* app-shells/zsh-5.7.1-r1 [5.6.2]
* sys-block/gparted-1.0.0 [0.33.0]
* sys-kernel/gentoo-kernel-bin-4.19.98 [4.19.96]
* sys-kernel/linux-firmware-20200122 [20191215]
* www-client/firefox-bin-72.0.2 [72.0.1]
Minor updates/rebuilds applied
Removed :
* sys-devel/llvm-8.0.1
Misc :
* Clamav database updated
daily.cld updated (version: 25708, sigs: 2163486, f-level: 63, builder: raynman)
main.cvd database is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
bytecode.cvd database is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Known Issues :
* Segmentation fault running partclone with -N option (ncurses support/interface)
(Partclone : v0.3.13 (08772bdc755a0f0f2177b45286535b3f77d18de3)
Bug : https://github.com/Thomas-Tsai/partclone/issues/132 |
Enjoy 
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Mon Feb 10, 2020 8:25 pm Post subject: |
|
|
20200210-1324 Release available.
(Download Page)
Torrents and Daily Images
[FSA] - FSArchiver Backup Image
[IMG] - RAW Disk Image
[VDI] - VirtualBox Disk Image
Changelog from latest daily image:
| Quote: | ============ 20200210-1324 ============
Major updates :
app-antivirus/clamtk-6.02-r1 [6.02]
app-antivirus/clamav-0.102.2 [0.102.1-r3]
app-editors/vim-8.2.0210 [8.2.0114]
app-editors/gvim-8.2.0210-r1 [8.2.0114]
sys-firmware/intel-microcode-20191115_p20200209 [20191115_p20191110]
sys-kernel/gentoo-kernel-bin-4.19.102 [4.19.99]
Minor updates/rebuild applied
Misc :
* Clamav database updated
Daily.cld database is up to date (version: 25716, sigs: 2175511, f-level: 63, builder: raynman)
main.cvd database is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
bytecode.cvd database is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Known Issues :
* Segmentation fault running partclone with -N option (ncurses support/interface)
(Partclone : v0.3.13 (08772bdc755a0f0f2177b45286535b3f77d18de3)
Bug : https://github.com/Thomas-Tsai/partclone/issues/132 |
Features
- Boot Menu revisited
- TTY1 Menu
1. Resize filesystem
2. Add User
3. Secure Delete All users data
4. Start Graphical Environment (root)
5. Set Root password
XFS filesystem can be grow if free space will be available (for the target device size >7.7GB)
You can Add default user.
Please test !
Thanks for sharing this !
Good Luck !
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
lyallp
Veteran
Joined: 15 Jul 2004
Posts: 1597
Location: Adelaide/Australia
|
| Posted: Thu Feb 13, 2020 12:08 pm Post subject: Can't read vdi using Virtualbox 6.1.2_Gentoor135662 |
|
|
Downloaded using Vuze on 13-Feb-2020
| Code: | $ zstd -o Gentoo_20200210-1324-LRS.vdi 20200210-1324-LRS.vdi.zst
20200210-1324-LRS.vdi.zst : 99.97% (1394631769 => 1394239015 bytes, Gentoo_20200210-1324-LRS.vdi)
lyall@Lyalls-PC ~/Downloads/20200210-1324-LRS_[VDI]
|
| Code: | $ VBoxManage clonemedium disk Gentoo_20200210-1324-LRS.vdi /data/VMs/Gentoo/Gentoo_20200210-1324-LRS.vdi --format VDI
VBoxManage: error: Could not get the storage format of the medium '/home/lyall/Downloads/20200210-1324-LRS_[VDI]/Gentoo_20200210-1324-LRS.vdi' (VERR_NOT_SUPPORTED)
VBoxManage: error: Details: code VBOX_E_IPRT_ERROR (0x80bb0005), component MediumWrap, interface IMedium, callee nsISupports
VBoxManage: error: Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, enmAccessMode, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 187 of file VBoxManageDisk.cpp |
Did I do something wrong?
_________________
...Lyall |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Thu Feb 13, 2020 1:00 pm Post subject: |
|
|
Why you're cloning VDI ?
Make new VM-Machine and select VDI image as new harddrive (not create a new VB disk)
[edit]
You must decompress .zst archive first. Your command is wrong (you're trying to compress the zstd archive again ).
| Code: | | zstd -d <file>.zst -o <your-name>.vdi |
or simply
| Code: | | zstd -d <image.vdi>.zst |
| Code: | man zstd
-d, --decompress, --uncompress |
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
lyallp
Veteran
Joined: 15 Jul 2004
Posts: 1597
Location: Adelaide/Australia
|
| Posted: Thu Feb 13, 2020 10:36 pm Post subject: |
|
|
Thanks, never used that decompression program before.
Regarding cloning, just testing, and didn't want to write to 'virgin' image until I was comfortable. Upon reflection, the compressed file remains pristine, so it was a waste of time but it did highlight my screw up decompressing.
_________________
...Lyall |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
|
| Back to top |
|
|
redblade7
Tux's lil' helper
Joined: 11 Jan 2018
Posts: 106
|
| Posted: Fri Feb 21, 2020 10:59 pm Post subject: |
|
|
| Just a note that you should not attempt to use gparted on the LRS jump drive. When you start gparted, it proceeds to correct a "partition table error" which reduces the maximum size of the jump drive to (IIRC) 50 MB. Don't remember what I did exactly to fix it, but I think I had to use the Windows 10 diskpart and/or gdisk (sys-apps/gptfdisk). |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Sat Feb 22, 2020 12:25 pm Post subject: |
|
|
This happens 'cause Gparted detect LRS device has more than 7.7GB (7.7 GB LRS image size) unused/unformtted free space. (example if you have "burned" LRS image on >=8GB USB/HDD device)
Just ignore the message or simply resize the LRS filesystem ( see the first menu choice on TTY1) or just run
| Code: | | /usr/local/bin/lrs-resize.sh |
On Daily image there is a ncurses/dialog menu on TTY1
https://imagizer.imageshack.com/img922/1513/kG4ODn.png
https://imagizer.imageshack.com/img923/7212/5NlRPA.png
I'm running LRS on 160GB SATA Disk (with USB adapter) and it works well
Some USB devices may be very bad I/O performances  this could not depends on LRS system.
[edit] I choosed XFS as LRS filesystem 'cause it can be resize (It can be expanded only) on running system (called hot resize) .
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
lyallp
Veteran
Joined: 15 Jul 2004
Posts: 1597
Location: Adelaide/Australia
|
| Posted: Mon Feb 24, 2020 8:26 am Post subject: |
|
|
Downloaded image and decompressed successfully 
However, it exhibits similar behavior to my problematic VM, get the Grub startup selection then hangs immediately after. in my VM case, loading ramdisk.
I suspect something in my host system has gone haywire, which is Gentoo  but the Windows 10 VM boots just fine...
_________________
...Lyall |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Mon Feb 24, 2020 11:54 am Post subject: |
|
|
I can't help you without any info about your VM config
This is my working config
| Code: | | VBoxManage showvminfo --details LRS |
| Code: | $ VBoxManage showvminfo --details LRS
Name: LRS
Groups: /
Guest OS: Gentoo (64-bit)
UUID: 45bbd191-72b2-4fb9-a5e5-1e9723b45e2f
Config file: /backups/Vbox/LRS/LRS.vbox
Snapshot folder: /backups/Vbox/LRS/Snapshots
Log folder: /backups/Vbox/LRS/Logs
Hardware UUID: 45bbd191-72b2-4fb9-a5e5-1e9723b45e2f
Memory size 4096MB
Page Fusion: disabled
VRAM size: 16MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 4
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: enabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: HardDisk
Boot Device 2: Not Assigned
Boot Device 3: Not Assigned
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: UTC
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: disabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: KVM
State: running (since 2020-02-24T11:46:33.222000000)
Graphics Controller: VMSVGA
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE (1, 0): Empty
SATA (0, 0): /backups/LRS/LRS.vdi (UUID: 16376586-ab3e-47cc-af5f-1c6f1581f7d9)
NIC 1: MAC: 080027E8C761, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: disabled
Audio playback: enabled
Audio capture: disabled
Clipboard Mode: disabled
Drag and drop Mode: disabled
Session name: GUI/Qt
Video mode: 800x600x32 at 0,0 enabled
VRDE: disabled
OHCI USB: enabled
EHCI USB: enabled
xHCI USB: disabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:<none>
VRDE Connection: not active
Clients so far: 0
Capturing: active
Capture audio: active
Capture screens: 0
Capture file: /backups/Vbox/LRS/LRS.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options: vc_enabled=true,ac_enabled=true,ac_profile=med
Guest:
Configured memory balloon size: 0MB
OS type: Linux26_64
Additions run level: 1
Additions version: 6.0.0 r127566
Guest Facilities:
Facility "VirtualBox Base Driver": active/running (last update: 2020/02/24 11:47:14 UTC)
Facility "Seamless Mode": not active (last update: 2020/02/24 11:47:14 UTC)
Facility "Graphics Mode": not active (last update: 2020/02/24 11:47:14 UTC)
|
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA
Last edited by sabayonino on Mon Feb 24, 2020 12:02 pm; edited 1 time in total |
|
| Back to top |
|
|
lyallp
Veteran
Joined: 15 Jul 2004
Posts: 1597
Location: Adelaide/Australia
|
| Posted: Mon Feb 24, 2020 12:02 pm Post subject: |
|
|
It is somewhat annoying, given the VM is years old and worked fine up until recently.
Windows 7 and Windows 10 VMs both boot fine.
| Code: | lyall@Lyalls-PC ~
$ VBoxManage showvminfo --details Gentoo
Name: Gentoo
Groups: /
Guest OS: Gentoo (64-bit)
UUID: b78e9be4-b0bc-4601-86fc-534085445c6a
Config file: /data/VMs/Gentoo/Gentoo.vbox
Snapshot folder: /data/VMs/Gentoo/Snapshots
Log folder: /data/VMs/Gentoo/Logs
Hardware UUID: b78e9be4-b0bc-4601-86fc-534085445c6a
Memory size 10241MB
Page Fusion: disabled
VRAM size: 32MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 2
PAE: enabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: disabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: DVD
Boot Device 2: HardDisk
Boot Device 3: Not Assigned
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: UTC
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: disabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Legacy
Effective Paravirt. Prov.: None
State: powered off (since 2020-02-24T08:19:23.000000000)
Graphics Controller: VMSVGA
Monitor count: 1
3D Acceleration: enabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 3
Storage Controller Bootable (1): on
IDE (1, 0): Empty
SATA (1, 0): /data/VMs/Gentoo/Gentoo.vdi (UUID: a14ca283-234f-4dee-9af0-3c8f0b891525)
NIC 1: MAC: 0800272E30B9, Attachment: Bridged Interface 'enp0s31f6', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: ALSA, Controller: AC97, Codec: STAC9700)
Audio playback: enabled
Audio capture: enabled
Clipboard Mode: Bidirectional
Drag and drop Mode: disabled
VRDE: enabled (Address 0.0.0.0, Ports 3389, MultiConn: off, ReuseSingleConn: off, Authentication type: null)
Video redirection: disabled
VRDE property : TCP/Ports = "3389"
VRDE property : TCP/Address = <not set>
VRDE property : VideoChannel/Enabled = <not set>
VRDE property : VideoChannel/Quality = <not set>
VRDE property : VideoChannel/DownscaleProtection = <not set>
VRDE property : Client/DisableDisplay = <not set>
VRDE property : Client/DisableInput = <not set>
VRDE property : Client/DisableAudio = <not set>
VRDE property : Client/DisableUSB = <not set>
VRDE property : Client/DisableClipboard = <not set>
VRDE property : Client/DisableUpstreamAudio = <not set>
VRDE property : Client/DisableRDPDR = <not set>
VRDE property : H3DRedirect/Enabled = <not set>
VRDE property : Security/Method = <not set>
VRDE property : Security/ServerCertificate = <not set>
VRDE property : Security/ServerPrivateKey = <not set>
VRDE property : Security/CACertificate = <not set>
VRDE property : Audio/RateCorrectionMode = <not set>
VRDE property : Audio/LogPath = <not set>
OHCI USB: enabled
EHCI USB: enabled
xHCI USB: disabled
USB Device Filters:
<none>
Bandwidth groups: <none>
Shared folders:
Name: 'lyall', Host path: '/home/lyall' (machine mapping), writable, auto-mount
Capturing: not active
Capture audio: not active
Capture screens: 0
Capture file: /data/VMs/Gentoo/Gentoo.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options: ac_enabled=false
Description:
Compiler set to clang, except for packages that won't compile with clang.
Fluxbox installed.
Emacs installed.
Use SSH to access outside of the console.
Time is synced using SetVMTime.sh to set parameters.
Specifically,
VBoxManage guestproperty set "${VMNAME}" "/VirtualBox/GuestAdd/VBoxService/--timesync-interval" 10000
VBoxManage guestproperty set "${VMNAME}" "/VirtualBox/GuestAdd/VBoxService/--timesync-min-adjust" 100
VBoxManage guestproperty set "${VMNAME}" "/VirtualBox/GuestAdd/VBoxService/--timesync-set-on-restore" 1
VBoxManage guestproperty set "${VMNAME}" "/VirtualBox/GuestAdd/VBoxService/--timesync-set-threshold" 1000
VBoxManage guestproperty enumerate "${VMNAME}" | grep timesync | sort
Guest:
Configured memory balloon size: 0MB
|
_________________
...Lyall |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
|
| Back to top |
|
|
lyallp
Veteran
Joined: 15 Jul 2004
Posts: 1597
Location: Adelaide/Australia
|
| Posted: Mon Feb 24, 2020 12:55 pm Post subject: |
|
|
Completely new config using same VDI, upped to 2 cores, 2G memory but all the rest of the settings are default.
Still no go. 
Oh, but a new VM for the rescue image does boot.
| Code: |
lyall@Lyalls-PC ~
$ VBoxManage showvminfo --details Gentoo
Name: Gentoo
Groups: /
Guest OS: Gentoo (64-bit)
UUID: 4498b4eb-099c-484f-bd62-6e25df8cc381
Config file: /data/VMs/Gentoo/Gentoo.vbox
Snapshot folder: /data/VMs/Gentoo/Snapshots
Log folder: /data/VMs/Gentoo/Logs
Hardware UUID: 4498b4eb-099c-484f-bd62-6e25df8cc381
Memory size 2048MB
Page Fusion: disabled
VRAM size: 16MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: enabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: DVD
Boot Device 2: HardDisk
Boot Device 3: Not Assigned
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: UTC
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: disabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: KVM
State: powered off (since 2020-02-24T12:52:05.733000000)
Graphics Controller: VMSVGA
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE (1, 0): Empty
SATA (0, 0): /data/VMs/Gentoo/Gentoo.vdi (UUID: a14ca283-234f-4dee-9af0-3c8f0b891525)
NIC 1: MAC: 08002724FF20, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: PulseAudio, Controller: AC97, Codec: AD1980)
Audio playback: enabled
Audio capture: disabled
Clipboard Mode: disabled
Drag and drop Mode: disabled
VRDE: disabled
OHCI USB: enabled
EHCI USB: enabled
xHCI USB: disabled
USB Device Filters:
<none>
Bandwidth groups: <none>
Shared folders:<none>
Capturing: active
Capture audio: not active
Capture screens:
Capture file: /data/VMs/Gentoo/Gentoo.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options: vc_enabled=true,ac_enabled=false,ac_profile=med
Guest:
Configured memory balloon size: 0MB
|
_________________
...Lyall |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Thu Mar 26, 2020 12:22 am Post subject: |
|
|
LRS 20200325-2130 released
Images :
* RAW Disk image
* VirtualBox Disk Image
* FSArchiver backup image
Changes :
- A simple menu to setup default user , root password and filesystem resize (grow)
- Kernel 5.5.11
- Many packages updated from latest torrent released
* Keep in mind : all user data are persistence and stored on the device . Be carefully !!
Torrents available
Daily images available
Enjoy
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Thu Apr 23, 2020 12:15 am Post subject: |
|
|
Hi guys
LRS 20200423-0018 released
Torrents
| Code: | 20200423-0018-LRS_[FSA].torrent
name 20200423-0018-LRS.fsa
comment FSArchiver Disk Backup for LRS
tracker url udp://tracker_proxy:56/announce
created by mktorrent 1.1
created on 2020/04/22 22:39:31 CET
file name 20200423-0018-LRS.fsa
file size 1.5GB
20200423-0018-LRS_[IMG].torrent
name 20200423-0018-LRS.img.zst
comment RAW Disk Image for LRS
tracker url udp://tracker_proxy:56/announce
created by mktorrent 1.1
created on 2020/04/22 22:39:38 CET
file name 20200423-0018-LRS.img.zst
file size 1.3GB
20200423-0018-LRS_[OVA].torrent
name 20200423-0018-LRS.ova
comment Open Virtualization Format (.ova) - VirtualBox or VMWare virtualization softwares for LRS
tracker url udp://tracker_proxy:56/announce
created by mktorrent 1.1
created on 2020/04/22 22:39:39 CET
file name 20200423-0018-LRS.ova
file size 1.6GB |
FSA
FSarchiver is a LRS backup filesystems for EFI and System partition
System can boot in EFI modeI
MBR bootloader must be installed by the user
RAW
RAW image is a cloned backup
Uncompress ZSTD archive and put the raw image on USB/HDD/SSD device using your favouirite tools
(see : app-cdr/isoimagewriter , dd , dcfldd , RosaImageWriter ..)
OVA
Virtual Disk Image (Virtualbox) was moved to OVA
====
Daily : LRS 20200423-0018 (direct download)
====
20200423-0018 Changelog :
| Changelog wrote: | ============ 20200423-0018 ============
* LRS VirtualBox image (VDI) is moved to Open Virtualization Format (OVA) image
By default the new imported machine has a bridge interface enabled
Please make sure to setup the MAC address according your preferences during OVA importing
* NFS and RSYNC daemon enabled
LRS /mnt directory is shared over NFS and RSYNC daemon
* LRS package updates
- consolekit replaced by elongind
- GCC 9.3.0
- Multiple updates and security updates applied from latest daily image
(see /root/updates file for details )
Known Issues
* Segmentation fault running partclone with -N option (ncurses support/interface)
(Partclone : v0.3.13 (08772bdc755a0f0f2177b45286535b3f77d18de3)
Bug : https://github.com/Thomas-Tsai/partclone/issues/132
|
OVA (.ova , .ovf) can be imported by common virtualization softwares like VirtualBox or VMWare applications
General
* Keyboard layout can be setup at first boot
* Filesystem can be resized online if a unused free space is available on the device.
* Default User can be created and a SLIM is used as Login Manager by default.
* Root user can start Graphical Environment until default user will be created.
* /mnt directory is exported over NFS
* Rsync daemon available for /mnt directory
* SSH is available only after you have created a default user
Virtual Machine
Virtual Machine has Bridged network and it can be reached directly from the network (It can obtain an IP address from the router)
* You can share your files/directory between Host and Guest and viceversa over Guest /mnt directory
Known issue not reported on CHANGELOG file
NVIDIA hybrid video card can freeze the system or hangs on early boot process , please try do disable ACPI option at boot and/or choose VESA drivers
Warning
| Quote: | | all users data are persistence and stored on the device . Be carefully !! |
Mini Howtos
Uncompress ZSTD archive
| Code: | | zstd -d -v -k -T$(nproc) LRS.img.zst |
Import OVA images running VirtualBox (VMWare not tested but it can be imported)
| Code: | | $ VBoxManage import LRS.ova |
You can import LRS.ova from VirtualBox GUI
| Code: | | File --> Import Appliance... |
Follow the Widzard VM setup
See VMs available
| Code: | | $ VBoxManage list vms |
*Qemu*
You can convert RAW Image or OVA to qcov2 image.
RAW image --> qcov2
| Code: | | $ qemu-img convert -f raw -O qcow2 LRS.img LRS.qcov2 |
OVA-->qcov2
Check the OVA contents (is a tar container)
| Code: | $ tar -tf LRS.ova
LRS.ovf
LRS.vmdk
|
VMDK is a VMware disk image compatible
Extract LRS.ova files
| Code: | $ tar -xvf LRS.ova
LRS.ovf
LRS.vmdk
|
Check what kind VMDK file is.
| Code: | $ file LRS.vmdk
LRS.vmdk: VMware4 disk image |
Convert LRS.vmdk to qcov2 (Qemu must be installed)
| Code: | | $ qemu-img convert -O qcow2 LRS.vmdk LRS.qcow2 |
From RAW image to VDI
(VirtualBox must be installed)
| Code: | | $ VBoxManage LRS.img LRS.vdi --format VDI |
That's all !!
Keep in mind : You'll have a Gentoo system . You can customize LRS just you like it !
Please share the Torrents and Enjoy LRS !!
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1028
|
| Posted: Sat Apr 25, 2020 7:43 am Post subject: |
|
|
A fix is coming
After consolekit replacement (elogind) , Xfce4 session for the root user may be broken
[FIX]
/root/.xinitrc
| Code: | | exec dbus-launch --exit-with-session xfce4-session |
Default user (if created) no need .xinitrc file 'cause a login manager is enabled.
Sorry for the inconvenience 
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
