| View previous topic :: View next topic |
| Author |
Message |
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
 Posted: Wed Jun 17, 2020 7:11 pm Post subject: network suddenly stops working after few days |
 |
|
Hello
I'm having strange issue with my network card
It stops working after few days of powered on machine
But when I log and do | Code: |
# ifconfig eth_int down
# ifconfig eth_int up |
it is working again
On past time I didn't have this issue on kernel 4.9.76 (x86_64)
but I'm getting this on actual latest 4.19.120 and also had it on previous 4.19.113
Can I ask for some help?
I guess I missed a new option in the newer kernel
The thing I didn't do properly is I copied .config from 4.9.76 to 4.19.113 and compilled kernel then I did the same with 4.19.120 
I'm using compilled kernel (I thought it was fine) on ASUS Sabertooth 990FX 2.0 Realtek 8111F
I tried on module r8168 and r8169 both work the same way for me.
_________________
cogito ergo sum |
|
| Back to top |
|
 |
charles17
Advocate
Joined: 02 Mar 2008
Posts: 3685
|
| Posted: Thu Jun 18, 2020 5:36 am Post subject: |
|
|
As you are not giving too much information:
topic 1105018? |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Thu Jun 18, 2020 9:49 am Post subject: |
|
|
I didn't wrote more because I don't know what info more should I post
the topic you mentioned about is for kernels 5.x and I'm on 4.19
_________________
cogito ergo sum |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1887
Location: Germany
|
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Thu Jun 18, 2020 12:58 pm Post subject: |
|
|
I will wait til it happens again. | Code: |
cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).
# config_wlan0="dhcp"
# modules_wlan0="wpa_supplicant"
# wpa_supplicant_wlan0="-Dnl80211"
#config_eth_1000="192.168.2.13 netmask 255.255.255.0"
config_eth_int="dhcp"
config_eth_100="10.0.2.13/24"
# The network scripts are now part of net-misc/netifrc
# In order to avoid sys-apps/openrc-0.12.4 from removing this file, this comment was
# added; you can safely remove this comment. Please see
# /usr/share/doc/netifrc*/README* for more information.
# |
Is this the config you want or more?
from dmesg I see: (script that prints dmesg with date) | Code: |
$ perl dmesg.perl | grep link
[2020-06-15 09:32:43] audit: initializing netlink subsys (disabled)
[2020-06-15 09:32:44] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[2020-06-15 09:32:45] ata7: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:45] ata9: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:45] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:45] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:45] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] Initializing XFRM netlink socket
[2020-06-15 09:32:45] ata8: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:46] ata10: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_pro: link is not ready
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-15 09:33:04] 8139too 0000:08:05.0 eth_100: link down
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_100: link is not ready
[2020-06-15 09:33:07] r8168: eth_int: link up
[2020-06-15 09:33:07] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
[2020-06-17 20:56:21] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-17 20:56:24] r8168: eth_int: link up
[2020-06-17 20:56:24] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
$ |
_________________
cogito ergo sum |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1887
Location: Germany
|
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Fri Jun 19, 2020 7:58 am Post subject: |
|
|
only 2 interfaces are uncommented
eth_int is for global network
the other entry is for my internal network but I had it all for years and it was always good in the past time
_________________
cogito ergo sum |
|
| Back to top |
|
|
guitou
Guru
Joined: 02 Oct 2003
Posts: 534
Location: France
|
| Posted: Sat Jun 20, 2020 6:39 pm Post subject: |
|
|
Hello.
Wild guess: a many days dhcp lease that comes to an end and does not properly renew?
++
Gi) |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Sat Jun 20, 2020 7:03 pm Post subject: |
|
|
can't be a dhcp lease
it doesn't happen periodically
as for now it works longer than it used to work 'til 1st crash | Code: |
$ perl Pobrane/dmesg.perl | grep link
[2020-06-15 09:32:42] audit: initializing netlink subsys (disabled)
[2020-06-15 09:32:43] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[2020-06-15 09:32:44] ata7: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:44] ata9: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:44] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:44] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:44] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:44] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:44] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:44] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:44] Initializing XFRM netlink socket
[2020-06-15 09:32:44] ata8: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:45] ata10: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:33:03] IPv6: ADDRCONF(NETDEV_UP): eth_pro: link is not ready
[2020-06-15 09:33:03] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-15 09:33:03] 8139too 0000:08:05.0 eth_100: link down
[2020-06-15 09:33:03] IPv6: ADDRCONF(NETDEV_UP): eth_100: link is not ready
[2020-06-15 09:33:06] r8168: eth_int: link up
[2020-06-15 09:33:06] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
[2020-06-17 20:56:20] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-17 20:56:23] r8168: eth_int: link up
[2020-06-17 20:56:23] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
$ |
it's not a thing that happens in specific time 
_________________
cogito ergo sum |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5373
Location: Bavaria
|
| Posted: Sat Jun 20, 2020 7:33 pm Post subject: |
|
|
| Oniryczny wrote: | [...]it doesn't happen periodically
as for now it works longer than it used to work 'til 1st crash |
Do you have problems with heat ?
What happens if you do nothing ? ( = Did the link come back in some time ?)
-""- try an other switch port ?
-""- try an other patch cable ?
Do you have a cat or dog around there ? |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Sun Jun 21, 2020 12:42 pm Post subject: |
|
|
No pets at my home
No problems with heat
It already happened on different cable different switch different port
When it occurs nothing in logs and doesn't work until i put out and in the cable
or as I did using commands ifconfig down/ifconfig up
_________________
cogito ergo sum |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5373
Location: Bavaria
|
| Posted: Sun Jun 21, 2020 3:13 pm Post subject: Re: network suddenly stops working after few days |
|
|
| Oniryczny wrote: | | I tried on module r8168 and r8169 both work the same way for me. |
OK. It could be a hardware problem with your ethernet adapter. But on the other side, sometimes these modules have some problems. I would wait for a new kernel version.
(you know already this thread ? https://forum.manjaro.org/t/r8168-kernel-5-6-3-driver-broken/135325) |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Sun Jun 21, 2020 4:08 pm Post subject: |
|
|
I'm using 4.19.120
had problems on 4.19.113
on previous motherboard (that died) I had RTL8111E (now I have 8111F) and was working like a charm
EDIT
It happened this evening again
so I did ifconfig down/up and it is working again.
There is nothing about it in dmesg, just about link that i was turning down and up | Code: |
$ perl Pobrane/dmesg.perl | grep link
[2020-06-15 09:32:43] audit: initializing netlink subsys (disabled)
[2020-06-15 09:32:44] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[2020-06-15 09:32:45] ata7: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:45] ata9: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:45] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:45] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2020-06-15 09:32:45] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2020-06-15 09:32:45] Initializing XFRM netlink socket
[2020-06-15 09:32:45] ata8: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:32:46] ata10: SATA link down (SStatus 0 SControl 300)
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_pro: link is not ready
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-15 09:33:04] 8139too 0000:08:05.0 eth_100: link down
[2020-06-15 09:33:04] IPv6: ADDRCONF(NETDEV_UP): eth_100: link is not ready
[2020-06-15 09:33:07] r8168: eth_int: link up
[2020-06-15 09:33:07] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
[2020-06-17 20:56:21] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-17 20:56:24] r8168: eth_int: link up
[2020-06-17 20:56:24] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
[2020-06-21 21:12:54] IPv6: ADDRCONF(NETDEV_UP): eth_int: link is not ready
[2020-06-21 21:12:57] r8168: eth_int: link up
[2020-06-21 21:12:57] IPv6: ADDRCONF(NETDEV_CHANGE): eth_int: link becomes ready
$ |
_________________
cogito ergo sum |
|
| Back to top |
|
|
|
Networking & Security
