.desktop e comando para criar um .ebuild

Xinitrc · Posted: Sun Oct 25, 2020 2:20 am Post subject: Ok

1)Você é moderador/administrador do fórum Gentoo?
2)Gostaria de uma área para postar programas feitos pelos membros,assim eu postaria meus programas para Gentoo no Lazarus junto com o código fonte de cada programa,não se faz open source sem abrir o código fonte do programa,assim o pessoal talvez confiaria no meus programas,e melhoraria eles.neh?

Xinitrc · Posted: Sun Oct 25, 2020 4:26 am Post subject: Ok

Olha o erro:O que estou fazendo de errado?

ebuild VisualizadorDeImagem-bin-9999.ebuild clean install
Appending /home/junior/localrepo to PORTDIR_OVERLAY...
* Visualizador.tar.gz BLAKE2B SHA512 size ;-)

... [ ok ]
* Visualizador.png BLAKE2B SHA512 size ;-)

... [ ok ]
* checking ebuild checksums ;-)

... [ ok ]
* checking auxfile checksums ;-)

... [ ok ]
* checking miscfile checksums ;-)

... [ ok ]
>>> Unpacking source...
>>> Unpacking Visualizador.tar.gz to /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work

gzip: /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/Visualizador.tar.gz: not in gzip format
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sci-misc/VisualizadorDeImagem-bin-9999::localrepo failed (unpack phase):
* unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/Visualizador.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)
*
* Call stack:
* ebuild.sh, line 125: Called src_unpack
* environment, line 1684: Called unpacker_src_unpack
* environment, line 2546: Called unpacker
* environment, line 2541: Called _unpacker 'Visualizador.tar.gz'
* environment, line 558: Called assert 'unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/Visualizador.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)'
* isolated-functions.sh, line 18: Called die
* The specific snippet of code:
* [[ $x -eq 0 ]] || die "$@"
*
* If you need support, post the output of `emerge --info '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`,
* the complete build log and the output of `emerge -pqv '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`.
* The complete build log is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/environment'.
* Working directory: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'
* S: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'
junior-aspiref5573g /home/junior/localrepo/sci-misc/VisualizadorDeImagem-bin #

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Sun Oct 25, 2020 4:54 pm Post subject: ok

Como faço para minha html ter o raw invés do blob?

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Mon Oct 26, 2020 12:13 am Post subject: Ok

Coloquei raw no link do localrepo,mas aparece o seguinte:

emerge VisualizadorDeImagem-bin
Calculating dependencies ... done!

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) sci-misc/VisualizadorDeImagem-bin-9999::localrepo
* VisualizadorDeImagens.tar.gz BLAKE2B SHA512 size ;-)

... [ ok ]
* Visualizador.png BLAKE2B SHA512 size ;-)

... [ ok ]
>>> Unpacking source...
>>> Unpacking VisualizadorDeImagens.tar.gz to /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work

gzip: /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/VisualizadorDeImagens.tar.gz: not in gzip format
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sci-misc/VisualizadorDeImagem-bin-9999::localrepo failed (unpack phase):
* unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/VisualizadorDeImagens.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)
*
* Call stack:
* ebuild.sh, line 125: Called src_unpack
* environment, line 1686: Called unpacker_src_unpack
* environment, line 2548: Called unpacker
* environment, line 2543: Called _unpacker 'VisualizadorDeImagens.tar.gz'
* environment, line 560: Called assert 'unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/VisualizadorDeImagens.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)'
* isolated-functions.sh, line 18: Called die
* The specific snippet of code:
* [[ $x -eq 0 ]] || die "$@"
*
* If you need support, post the output of `emerge --info '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`,
* the complete build log and the output of `emerge -pqv '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`.
* The complete build log is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/environment'.
* Working directory: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'
* S: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'

>>> Failed to emerge sci-misc/VisualizadorDeImagem-bin-9999, Log file:

>>> '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/build.log'

* Messages for package sci-misc/VisualizadorDeImagem-bin-9999:

* ERROR: sci-misc/VisualizadorDeImagem-bin-9999::localrepo failed (unpack phase):
* unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/VisualizadorDeImagens.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)
*
* Call stack:
* ebuild.sh, line 125: Called src_unpack
* environment, line 1686: Called unpacker_src_unpack
* environment, line 2548: Called unpacker
* environment, line 2543: Called _unpacker 'VisualizadorDeImagens.tar.gz'
* environment, line 560: Called assert 'unpacking /var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/distdir/VisualizadorDeImagens.tar.gz failed (comp=gzip -dc arch=tar --no-same-owner -xof)'
* isolated-functions.sh, line 18: Called die
* The specific snippet of code:
* [[ $x -eq 0 ]] || die "$@"
*
* If you need support, post the output of `emerge --info '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`,
* the complete build log and the output of `emerge -pqv '=sci-misc/VisualizadorDeImagem-bin-9999::localrepo'`.
* The complete build log is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/temp/environment'.
* Working directory: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'
* S: '/var/tmp/portage/sci-misc/VisualizadorDeImagem-bin-9999/work'

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Tue Oct 27, 2020 7:55 am Post subject: Ok

Ultima pergunta mestre:

Qual é a sua idade?

Pergunto isso,porque tu sabe muito de Gentoo etc...

Xinitrc · Posted: Wed Oct 28, 2020 12:06 am Post subject: Erro

emerge VisualizadorDeImagem-bin

* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.

Calculating dependencies l * Digest verification failed:
* /var/db/repos/localrepo/sci-misc/VisualizadorDeImagem-bin/VisualizadorDeImagem-bin-9999.ebuild
* Reason: Filesize does not match recorded size
* Got: 1733
* Expected: 1721
... done!

!!! All ebuilds that could satisfy "VisualizadorDeImagem-bin" have been masked.
!!! One of the following masked packages is required to complete your request:
- sci-misc/VisualizadorDeImagem-bin-9999::localrepo (masked by: corruption)

For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.

Xinitrc · Posted: Wed Oct 28, 2020 5:01 pm Post subject: Ok

A calculadora que tu me ensinou a fazer está dando esse erro no computador,depois que formatei o redcore:

junior-aspiref5573g /home/junior/localrepo/sci-calculators/CalculadoraDecimo-bin # repoman manifest
>>> Downloading 'https://gitlab.com/BuiuDeJaraguaDoSul/gentoocalculadoradedecimoterceirosalario/-/raw/master/CalculadoraDecimo.tar.gz'
--2020-10-28 14:00:29-- https://gitlab.com/BuiuDeJaraguaDoSul/gentoocalculadoradedecimoterceirosalario/-/raw/master/CalculadoraDecimo.tar.gz
Resolving gitlab.com... 172.65.251.78, 2606:4700:90:0:f22e:fbec:5bed:a9b9
Connecting to gitlab.com|172.65.251.78|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-10-28 14:00:30 ERROR 404: Not Found.

>>> Downloading 'http://mirror.bytemark.co.uk/gentoo/distfiles/4b/CalculadoraDecimo.tar.gz'
--2020-10-28 14:00:30-- http://mirror.bytemark.co.uk/gentoo/distfiles/4b/CalculadoraDecimo.tar.gz
Resolving mirror.bytemark.co.uk... 212.110.163.12, 80.68.83.150, 2001:41c8:20:5e6::150, ...
Connecting to mirror.bytemark.co.uk|212.110.163.12|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-10-28 14:00:30 ERROR 404: Not Found.

!!! Couldn't download 'CalculadoraDecimo.tar.gz'. Aborting.
!!! Fetch failed for CalculadoraDecimo.tar.gz, can't update Manifest
!!! Unable to generate manifest for '/home/junior/localrepo/sci-calculators/CalculadoraDecimo-bin'.
ebuild.notadded 1
manifest.bad [fatal] 1
sci-calculators/CalculadoraDecimo-bin/Manifest

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Wed Oct 28, 2020 5:36 pm Post subject: Re: Ok

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Wed Oct 28, 2020 6:50 pm Post subject: Re: Ok

Xinitrc · Posted: Thu Oct 29, 2020 7:54 am Post subject: Ok

Mestre,aprendi tudo contigo,só não aprendi a resolver problemas,como esse por exemplo:

junior-aspiref5573g /var/db/repos/localrepo/sci-misc/GeradorDeSenhas-bin # emerge GeradorDeSenhas-bin

* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.

Calculating dependencies ... done!

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) sci-misc/GeradorDeSenhas-bin-9999::localrepo
* Gerador.tar.gz BLAKE2B SHA512 size ;-)

... [ ok ]
* GeradorDeSenha.png BLAKE2B SHA512 size ;-)

... [ ok ]
>>> Unpacking source...
>>> Unpacking Gerador.tar.gz to /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work
>>> Unpacking GeradorDeSenha.png to /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work
unpack GeradorDeSenha.png: file format not recognized. Ignoring.
>>> Source unpacked in /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work
>>> Preparing source in /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work ...
>>> Source compiled.
>>> Test phase [not enabled]: sci-misc/GeradorDeSenhas-bin-9999

>>> Install sci-misc/GeradorDeSenhas-bin-9999 into /var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/image
cp: cannot stat '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/distdir/Gerador.png': No such file or directory
* ERROR: sci-misc/GeradorDeSenhas-bin-9999::localrepo failed (install phase):
* Install failed!
*
* Call stack:
* ebuild.sh, line 125: Called src_install
* environment, line 1675: Called die
* The specific snippet of code:
* cp -L "${DISTDIR}/Gerador.png" "${D}/usr/share/pixmaps/Gerador" || die "Install failed!";
*
* If you need support, post the output of `emerge --info '=sci-misc/GeradorDeSenhas-bin-9999::localrepo'`,
* the complete build log and the output of `emerge -pqv '=sci-misc/GeradorDeSenhas-bin-9999::localrepo'`.
* The complete build log is located at '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/temp/environment'.
* Working directory: '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work'
* S: '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work'

>>> Failed to emerge sci-misc/GeradorDeSenhas-bin-9999, Log file:

>>> '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/temp/build.log'

* Messages for package sci-misc/GeradorDeSenhas-bin-9999:

* ERROR: sci-misc/GeradorDeSenhas-bin-9999::localrepo failed (install phase):
* Install failed!
*
* Call stack:
* ebuild.sh, line 125: Called src_install
* environment, line 1675: Called die
* The specific snippet of code:
* cp -L "${DISTDIR}/Gerador.png" "${D}/usr/share/pixmaps/Gerador" || die "Install failed!";
*
* If you need support, post the output of `emerge --info '=sci-misc/GeradorDeSenhas-bin-9999::localrepo'`,
* the complete build log and the output of `emerge -pqv '=sci-misc/GeradorDeSenhas-bin-9999::localrepo'`.
* The complete build log is located at '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/temp/environment'.
* Working directory: '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work'
* S: '/var/tmp/portage/sci-misc/GeradorDeSenhas-bin-9999/work'

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Apenas se acalme, respire fundo, e olhe as mensagens com cuidado que você vai descobrir o problema:

Xinitrc · Posted: Fri Oct 30, 2020 2:32 pm Post subject: Re: Ok

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Fri Oct 30, 2020 5:49 pm Post subject: Re: Ok

ff11 · l33t Joined: 10 Mar 2014 Posts: 664

Xinitrc · Posted: Sat Oct 31, 2020 3:25 pm Post subject: Re: Ok