| View previous topic :: View next topic |
| Author |
Message |
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
 Posted: Tue Aug 17, 2021 5:28 am Post subject: Weird results on install |
 |
|
Hi, ALL,
I did the full install starting by booting the SystemRescueCD (because the laptop didn't have wired interface).
The install was successful, I installed and configured GRUB and then rebooted and removed the USB drive.
Laptop just froze displaying the line:
Loading kernel-5.xxxxxxxxx
So I put the USB drive back, and try reboot.
The SystemRescueCD have an option in GRUB to boot from the hard drive. I selected it and the boot process completed successfully.
Can somebody please help resolve this?
I don't want to keep the USB drive in the laptop...
Thank you. |
|
| Back to top |
|
 |
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Wed Aug 18, 2021 7:32 pm Post subject: |
|
|
Hi,
This is the kernel config in [url=https://dpaste.com/CK5AC8XS80here[/url]
And the lspci is as follows (from SystemRescueCD):
| Code: |
root@sysrescue /mnt/gentoo/usr/src/linux]# lspci -v
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Root Complex
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models
60h-6fh) I/O Memory Management Unit
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 24
Capabilities: [40] Secure device <?>
Capabilities: [64] MSI: Enable+ Count=1/4 Maskable- 64bit+
Capabilities: [74] HyperTransport: MSI Mapping Enable+ Fixed+
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c8) (prog-if 00 [VGA
controller])
DeviceName: ATI EG BROADWAY
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 51, IOMMU group 0
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0000000 (64-bit, prefetchable) [size=8M]
I/O ports at 2000 [size=256]
Memory at f0c00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [270] Secondary PCI Express
Capabilities: [2b0] Address Translation Service (ATS)
Capabilities: [2c0] Page Request Interface (PRI)
Capabilities: [2d0] Process Address Space ID (PASID)
Kernel driver in use: amdgpu
Kernel modules: amdgpu
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini
HDMI/DP Audio
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 49, IOMMU group 0
Memory at f0c60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Host Bridge
Flags: fast devsel, IOMMU group 1
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26, IOMMU group 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: f0b00000-f0bfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [c0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [c8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [270] Secondary PCI Express
Kernel driver in use: pcieport
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 27, IOMMU group 1
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: f0a00000-f0afffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [c0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [c8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [270] Secondary PCI Express
Kernel driver in use: pcieport
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Host Bridge
Flags: fast devsel, IOMMU group 2
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD]
Carrizo Platform Security Processor
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 3, IOMMU group 3
Memory at f0c40000 (64-bit, prefetchable) [size=128K]
Memory at f0900000 (32-bit, non-prefetchable) [size=1M]
Memory at f0c6f000 (32-bit, non-prefetchable) [size=4K]
Memory at f0c6a000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [50] MSI-X: Enable- Count=2 Masked-
Capabilities: [5c] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [60] Power Management version 3
Capabilities: [a4] PCI Advanced Features
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio
Dummy Host Bridge
Flags: fast devsel, IOMMU group 4
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Audio Controller
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 48, IOMMU group 4
Memory at f0c64000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB
XHCI Controller (rev 20) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 18, IOMMU group 5
Memory at f0c68000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA
Controller [AHCI mode] (rev 49) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19, IOMMU group 6
I/O ports at 2118 [size=8]
I/O ports at 2124 [size=4]
I/O ports at 2110 [size=8]
I/O ports at 2120 [size=4]
I/O ports at 2100 [size=16]
Memory at f0c6c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 3
Capabilities: [70] SATA HBA v1.0
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB
EHCI Controller (rev 49) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18, IOMMU group 7
Memory at f0c6d000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
Subsystem: Hewlett-Packard Company Device 81aa
Flags: 66MHz, medium devsel, IOMMU group 8
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, 66MHz, medium devsel, latency 0, IOMMU group 8
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 0
Flags: fast devsel, IOMMU group 9
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 1
Flags: fast devsel, IOMMU group 9
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 2
Flags: fast devsel, IOMMU group 9
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 3
Flags: fast devsel, IOMMU group 9
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 4
Flags: fast devsel, IOMMU group 9
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 60h-6fh) Processor Function 5
Flags: fast devsel, IOMMU group 9
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 29, IOMMU group 1
Memory at f0b00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
DeviceName: Intel WLAN Intel 7265NGWG.NVW Stone Peak 2 D0 ac 2x2 +
BT 4 LE PCIe+USB NGFF 2230 WW non-vPro
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
Flags: bus master, fast devsel, latency 0, IRQ 46, IOMMU group 1
Memory at f0a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number a4-02-b9-ff-ff-4a-8b-57
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
[root@sysrescue /mnt/gentoo/usr/src/linux]#
|
Thank you.
] |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
| Posted: Wed Aug 18, 2021 7:43 pm Post subject: |
|
|
Considering your problem description it has nothing to do with kernel, looks more like botched Grub installation. You haven't told us whether this is EFI or legacy boot. Also, in your other thread I asked for disk layout, a request you ignored.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly! |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Wed Aug 18, 2021 8:32 pm Post subject: |
|
|
Hi,
This is EFI setup.
The disk layout is just like in the HB for Gentoo:
/dev/sda1 - EFI poartition
/dev/sda2 - swap
/dev/sda3 - root.
Thank you. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Thu Aug 19, 2021 3:50 am Post subject: |
|
|
I think it's reading your kernel and freezing. That's the sign of a botched kernel. Install a binary kernel which should easily get you booted, then you can work on your normal gentoo-sources at your leisure. (it's not cheating)
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Thu Aug 19, 2021 4:26 am Post subject: |
|
|
Hi,
Do you see anything wrong with my kernel config?
At the same time - I don't think its kernel, because I am able to boot from SystemRescueCD, by electing "Boot from Hard Drive". So, Jaglover might be correct.
Thank you. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Thu Aug 19, 2021 5:35 am Post subject: |
|
|
| ONEEYEMAN wrote: | Hi,
Do you see anything wrong with my kernel config?
At the same time - I don't think its kernel, because I am able to boot from SystemRescueCD, by electing "Boot from Hard Drive". So, Jaglover might be correct.
Thank you. |
You are right, of course. Rats. I'll give it a good look tomorrow and try to get a clue.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Thu Aug 19, 2021 4:54 pm Post subject: |
|
|
Your kernel config URL comes up blank: https://dpaste.com/CK5AC8XS80here and https://dpaste.com/CK5AC8XS80
ADDED: Appears that https://dpaste.com/CK5AC8XS8 works.
You should fix that.
OpenRC or SystemD?
Check BIOS boot settings.
Redo GRUB install and configuration.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Thu Aug 19, 2021 11:06 pm Post subject: |
|
|
Hi,
It will be an OpenRC machine.
Will do that and report back...
Thank you. |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Fri Aug 20, 2021 1:11 am Post subject: |
|
|
Hi,
| Code: |
[root@sysrescue /mnt/gentoo/usr/src/linux]# chroot /mnt/gentoo /bin/bash
sysrescue / # source /etc/profile
sysrescue / # export PS1="(chroot) ${PS1}"
(chroot) sysrescue / # mount /dev/sda1 /boot
(chroot) sysrescue / # grub-install --target=x86_64-efi --efi-directory=/boot
Installing for x86_64-efi platform.
Installation finished. No error reported.
(chroot) sysrescue / # grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.10.52-gentoo
Found linux image: /boot/vmlinuz-5.10.52-gentoo.old
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
(chroot) sysrescue / #
|
I'm going to try and reboot now...
Thank you. |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Fri Aug 20, 2021 1:32 am Post subject: |
|
|
Hi,
The kernel is here.
I re-posted it and made it expire in 7 days.
Thank you. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Sat Aug 21, 2021 3:30 am Post subject: |
|
|
So, it's working? Booting?
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 4:43 am Post subject: |
|
|
Hi,
No, it does not.
Thank you. |
|
| Back to top |
|
|
CooSee
Veteran
Joined: 20 Nov 2004
Posts: 1468
Location: Earth
|
| Posted: Sat Aug 21, 2021 2:14 pm Post subject: |
|
|
which HP Model are you using?
_________________
" Die Realität ist eine Illusion, die durch Mangel an ehrlicher Kommunikation entsteht "
---
" Der Mensch ist von Natur aus neugierig, was am Ende übrig bleibt ist die Gier " |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Sat Aug 21, 2021 2:25 pm Post subject: |
|
|
Is sysrescue booting legacy mode?
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 3:25 pm Post subject: |
|
|
Hi,
| CooSee wrote: |
which HP Model are you using?
|
It is HP Envy x360.
Thank you. |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 5:28 pm Post subject: |
|
|
Hi,
| figueroa wrote: |
Is sysrescue booting legacy mode?
|
How do I check it?
Thank you. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Sat Aug 21, 2021 6:00 pm Post subject: |
|
|
Try running efibootmgr in a terminal shell. It will inform you. If it shows boot options, then it booted in UEFI. If it complains, it's running in traditional BIOS mode. That information might be informative.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 6:44 pm Post subject: |
|
|
Hi,
| Code: |
[root@sysrescue ~]# efibootmgr
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 2001,0003,3003,0001,0000,2002,2004
Boot0000* Notebook Hard Drive - HGST HTS721010A9E630
Boot0001* USB Hard Drive - USB
Boot0002* USB Hard Drive (UEFI) - USB (USB)
Boot0003* gentoo
Boot2001* EFI USB Device
Boot3003* Internal Hard Disk or Solid State Disk
[root@sysrescue ~]#
|
Thank you. |
|
| Back to top |
|
|
CooSee
Veteran
Joined: 20 Nov 2004
Posts: 1468
Location: Earth
|
| Posted: Sat Aug 21, 2021 6:55 pm Post subject: |
|
|
| ONEEYEMAN wrote: | Hi,
| CooSee wrote: |
which HP Model are you using?
|
It is HP Envy x360.
Thank you. |
in your kernel.conf 'nvme' is not activated.
is your device using a nvme drive?
can you please provide the complete model name e.g. '15m-ee0013dx'
thx
_________________
" Die Realität ist eine Illusion, die durch Mangel an ehrlicher Kommunikation entsteht "
---
" Der Mensch ist von Natur aus neugierig, was am Ende übrig bleibt ist die Gier " |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 7:47 pm Post subject: |
|
|
Hi,
I don't think it does use it.
The label on the back shows:
| Code: |
HP ENVY x360 m6 Convertible PC
Model: m6-ar0046dx
|
Thank you. |
|
| Back to top |
|
|
CooSee
Veteran
Joined: 20 Nov 2004
Posts: 1468
Location: Earth
|
| Posted: Sat Aug 21, 2021 8:45 pm Post subject: |
|
|
have you tried booting with 'sys-kernel/gentoo-kernel' or 'sys-kernel/gentoo-kernel-bin' ?
is current bios installed?
_________________
" Die Realität ist eine Illusion, die durch Mangel an ehrlicher Kommunikation entsteht "
---
" Der Mensch ist von Natur aus neugierig, was am Ende übrig bleibt ist die Gier " |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 9:09 pm Post subject: |
|
|
Hi,
No, I set up only gentoo-sources by hand.
Maybe I should use genkernel? But wi it work from SystemRescueCD?
Thank you. |
|
| Back to top |
|
|
GDH-gentoo
Veteran
Joined: 20 Jul 2019
Posts: 1688
Location: South America
|
| Posted: Sat Aug 21, 2021 9:47 pm Post subject: |
|
|
| ONEEYEMAN wrote: | And the lspci is as follows (from SystemRescueCD):
| Code: | 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c8) (prog-if 00 [VGA
controller])
...
Kernel driver in use: amdgpu
Kernel modules: amdgpu |
|
| ONEEYEMAN wrote: | | The kernel is here. |
| Code: | CONFIG_DRM_RADEON=y
...
# CONFIG_DRM_AMDGPU is not set
...
# Frame buffer hardware drivers
#
...
# CONFIG_FB_EFI is not set
...
# CONFIG_FB_SIMPLE is not set |
Try rebuilding your kernel with:
| Code: | Device Drivers --->
Graphics support --->
< > ATI Radeon
<*> AMD GPU
Frame buffer Devices --->
-*- Support for frame buffer devices --->
[*] EFI-based Framebuffer Support
[*] Simple framebuffer support |
Last edited by GDH-gentoo on Sun Aug 22, 2021 1:44 am; edited 1 time in total |
|
| Back to top |
|
|
ONEEYEMAN
Advocate
Joined: 01 Mar 2005
Posts: 3650
|
| Posted: Sat Aug 21, 2021 11:25 pm Post subject: |
|
|
Hi,
I don't have those options under "AMD GPU".
And they are not here at all.
Which kernel do you use?
Thank you. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Installing Gentoo
