View previous topic :: View next topic |
Author |
Message |
Lumpy Gravy n00b
Joined: 28 Dec 2016 Posts: 44 Location: France
|
Posted: Fri Jun 24, 2022 5:12 pm Post subject: [RÉSOLU] Partitions invisibles sur supports amovibles |
|
|
Bonjour.
J'ai un souci, lorsque je connecte une clé USB ou une carte SD à mon portable, elle est bien détectée mais ses partitions n'apparraissent pas avec lsblk:
Code: | $ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 223,6G 0 disk
├─sda1 8:1 0 2M 0 part
├─sda2 8:2 0 256M 0 part /boot
├─sda3 8:3 0 2G 0 part [SWAP]
└─sda4 8:4 0 221,3G 0 part /
sdb 8:16 1 60,1G 0 disk |
ni blkid:
Code: | # blkid
/dev/sdb: PTTYPE="dos"
/dev/sda4: UUID="408fc89f-9a9d-4820-ba09-e017e4fd67cd" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="rootfs" PARTUUID="2a018ce9-ace8-45fa-9445-d49c27c2528e"
/dev/sda2: UUID="377A-1858" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="boot" PARTUUID="12d5cc87-c445-4fdb-b5d0-fb05eea9f09f"
/dev/sda3: UUID="b3e48241-f359-47bd-b66b-923f27a49369" TYPE="swap" PARTLABEL="swap" PARTUUID="5af6a597-de19-4ea9-8844-11782c614be8"
/dev/sda1: UUID="f91dd4e9-9275-48b8-b308-5cbf8a084fca" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="grub" PARTUUID="6845aa59-029f-44c6-b689-e21a3615aaa2" |
Mais je peux l'afficher avec fdisk:
Code: | # fdisk -l /dev/sdb
Disque /dev/sdb : 60,06 GiB, 64490569728 octets, 125958144 secteurs
Modèle de disque : Card Reader
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00000000
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdb1 32768 125958143 125925376 60G 7 HPFS/NTFS/exFAT |
Voici ce que raconte dmesg à l'insertion de la clé:
Code: | [ 1528.222172] usb 1-4: new high-speed USB device number 6 using xhci_hcd
[ 1528.365215] usb 1-4: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
[ 1528.365233] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1528.365240] usb 1-4: Product: Flash Card Reader/Writer
[ 1528.365245] usb 1-4: Manufacturer: Generic
[ 1528.365250] usb 1-4: SerialNumber: 058F63666485
[ 1528.392354] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 1528.392821] scsi host2: usb-storage 1-4:1.0
[ 1528.393071] usbcore: registered new interface driver usb-storage
[ 1528.400184] usbcore: registered new interface driver uas
[ 1529.406784] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 1529.965233] sd 2:0:0:0: [sdb] 125958144 512-byte logical blocks: (64.5 GB/60.1 GiB)
[ 1529.967486] sd 2:0:0:0: [sdb] Write Protect is off
[ 1529.967501] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1529.969882] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 1529.982462] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1759.496560] usb 1-4: USB disconnect, device number 6 |
Merci d'avance pour votre aide.
Last edited by Lumpy Gravy on Thu Jul 07, 2022 7:04 am; edited 1 time in total |
|
Back to top |
|
|
netfab Veteran
Joined: 03 Mar 2005 Posts: 1906 Location: 127.0.0.1
|
Posted: Fri Jun 24, 2022 7:08 pm Post subject: |
|
|
Salut,
Peux-tu uploader quelque part ta configuration kernel, et donner un lien ?
Quel kernel utilises-tu ? Configuré/compilé main, ou kernel générique (gentoo-kernel-bin/genkernel) ? |
|
Back to top |
|
|
Lumpy Gravy n00b
Joined: 28 Dec 2016 Posts: 44 Location: France
|
Posted: Tue Jul 05, 2022 3:45 pm Post subject: |
|
|
Oups, désolé, je pensais que je suivais ce fil et que j'aurai des alertes.
Par contre c'est mon portable du boulot que je n'ai pas sous la main, j'up ma config dés que possible.
Concernant le noyau, il s'agit des ' gentoo-sources' que j'ai compilées à la main. |
|
Back to top |
|
|
Lumpy Gravy n00b
Joined: 28 Dec 2016 Posts: 44 Location: France
|
|
Back to top |
|
|
netfab Veteran
Joined: 03 Mar 2005 Posts: 1906 Location: 127.0.0.1
|
Posted: Wed Jul 06, 2022 8:12 am Post subject: |
|
|
C'est ce que je suspectais :
La partition de ta clef sdb est de type DOS :
Code: |
# blkid
/dev/sdb: PTTYPE="dos"
# fdisk -l /dev/sdb
...
Type d'étiquette de disque : dos
|
Mais ton kernel n'a pas le support pour ce type de partition :
Quote: |
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
|
Recompile ton kernel avec cette option activée, cela devrait ensuite fonctionner. |
|
Back to top |
|
|
Lumpy Gravy n00b
Joined: 28 Dec 2016 Posts: 44 Location: France
|
Posted: Thu Jul 07, 2022 7:03 am Post subject: |
|
|
Ça fonctionne, merci beaucoup! |
|
Back to top |
|
|
|