| View previous topic :: View next topic |
| Author |
Message |
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
 Posted: Wed Oct 19, 2022 1:30 pm Post subject: no wireless on raspberry pi 4 (solved) |
 |
|
Been playing with gentoo on a spare raspberry pi and cant get its wireless interface to show up after a fresh install. Not sure what I missed/did wrong. Running the 5.15 kernel. Checked that the correct firmware is in /lib/firmware. Using wired temporarily until I figure it out.
Any insight?
| Code: |
gentoopi ~ # uname -a
Linux gentoopi 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 GNU/Linux
|
| Code: | gentoopi ~ # ls -la /lib/firmware/brcm/brcmfmac43455*
-rw-r--r-- 1 root root 1723 Oct 19 08:03 /lib/firmware/brcm/brcmfmac43455-sdio.acepc-t8.txt
-rw-r--r-- 1 root root 1475 Oct 19 08:03 /lib/firmware/brcm/brcmfmac43455-sdio.AW-CM256SM.txt
lrwxrwxrwx 1 root root 33 Oct 19 08:06 /lib/firmware/brcm/brcmfmac43455-sdio.beagle,am5729-beagleboneai.txt -> brcmfmac43455-sdio.AW-CM256SM.txt
-rw-r--r-- 1 root root 631467 Oct 19 07:57 /lib/firmware/brcm/brcmfmac43455-sdio.bin
-rw-r--r-- 1 root root 7163 Oct 19 07:57 /lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
-rw-r--r-- 1 root root 2510 Oct 19 08:03 '/lib/firmware/brcm/brcmfmac43455-sdio.MINIX-NEO Z83-4.txt'
lrwxrwxrwx 1 root root 33 Oct 19 08:06 /lib/firmware/brcm/brcmfmac43455-sdio.pine64,pinebook-pro.txt -> brcmfmac43455-sdio.AW-CM256SM.txt
lrwxrwxrwx 1 root root 33 Oct 19 08:06 /lib/firmware/brcm/brcmfmac43455-sdio.pine64,pinephone-pro.txt -> brcmfmac43455-sdio.AW-CM256SM.txt
lrwxrwxrwx 1 root root 33 Oct 19 08:06 /lib/firmware/brcm/brcmfmac43455-sdio.pine64,quartz64-b.txt -> brcmfmac43455-sdio.AW-CM256SM.txt
lrwxrwxrwx 1 root root 49 Oct 19 08:06 /lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-a-plus.txt -> brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
-rw-r--r-- 1 root root 1884 Oct 19 08:03 /lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
-rw-r--r-- 1 root root 1883 Oct 19 08:03 /lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
lrwxrwxrwx 1 root root 44 Oct 19 08:06 '/lib/firmware/brcm/brcmfmac43455-sdio.Raspberry Pi Foundation-Raspberry Pi 4 Model B.txt' -> brcmfmac43455-sdio.raspberrypi,4-model-b.txt
lrwxrwxrwx 1 root root 44 Oct 19 08:06 '/lib/firmware/brcm/brcmfmac43455-sdio.Raspberry Pi Foundation-Raspberry Pi Compute Module 4.txt' -> brcmfmac43455-sdio.raspberrypi,4-model-b.txt
-rw-r--r-- 1 root root 2074 Oct 19 07:57 /lib/firmware/brcm/brcmfmac43455-sdio.txt
|
| Code: |
gentoopi ~ # grep boardflags3 /lib/firmware/brcm/brcmfmac43455-sdio.txt
boardflags3=0x44200100
|
| Code: |
gentoopi ~ # ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.86.61 netmask 255.255.255.0 broadcast 192.168.86.255
ether dc:a6:32:06:06:f1 txqueuelen 1000 (Ethernet)
RX packets 2058 bytes 252426 (246.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 382 bytes 52769 (51.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
| Code: |
gentoopi ~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.61-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] percpu: Embedded 28 pages/cpu s77272 r8192 d29224 u114688
[ 0.000000] pcpu-alloc: s77272 r8192 d29224 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=DC:A6:32:06:06:F1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=dd08d348-03 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 1562108K/2019328K available (11520K kernel code, 1956K rwdata, 4140K rodata, 3840K init, 974K bss, 129540K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38040 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000327] Console: colour dummy device 80x25
[ 0.000907] printk: console [tty1] enabled
[ 0.000981] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001022] pid_max: default: 32768 minimum: 301
[ 0.001167] LSM: Security Framework initializing
[ 0.001416] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002796] cgroup: Disabling memory control group subsystem
[ 0.005600] rcu: Hierarchical SRCU implementation.
[ 0.006767] EFI services will not be available.
[ 0.007333] smp: Bringing up secondary CPUs ...
[ 0.008523] Detected PIPT I-cache on CPU1
[ 0.008609] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.009812] Detected PIPT I-cache on CPU2
[ 0.009864] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.010995] Detected PIPT I-cache on CPU3
[ 0.011046] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011200] smp: Brought up 1 node, 4 CPUs
[ 0.011289] SMP: Total of 4 processors activated.
[ 0.011309] CPU features: detected: 32-bit EL0 Support
[ 0.011327] CPU features: detected: 32-bit EL1 Support
[ 0.011349] CPU features: detected: CRC32 instructions
[ 0.043633] CPU: All CPU(s) started at EL2
[ 0.043735] alternatives: patching kernel code
[ 0.045341] devtmpfs: initialized
[ 0.056461] Enabled cp15_barrier support
[ 0.056533] Enabled setend support
[ 0.056562] KASLR enabled
[ 0.056773] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.056825] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.066288] pinctrl core: initialized pinctrl subsystem
[ 0.067194] DMI not present or invalid.
[ 0.067933] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.071724] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.072050] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.073013] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.073134] audit: initializing netlink subsys (disabled)
[ 0.073451] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.074011] thermal_sys: Registered thermal governor 'step_wise'
[ 0.074241] cpuidle: using governor menu
[ 0.074590] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.074807] ASID allocator initialised with 32768 entries
[ 0.074977] Serial: AMBA PL011 UART driver
[ 0.085259] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.100457] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16, variant start
[ 0.104481] raspberrypi-firmware soc:firmware: Firmware hash is 102f1e848393c2112206fadffaaf86db04e98326
[ 0.155425] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.159676] vgaarb: loaded
[ 0.160143] SCSI subsystem initialized
[ 0.160364] usbcore: registered new interface driver usbfs
[ 0.160428] usbcore: registered new interface driver hub
[ 0.160506] usbcore: registered new device driver usb
[ 0.160953] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.161175] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.161502] pps_core: LinuxPPS API ver. 1 registered
[ 0.161526] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.161563] PTP clock support registered
[ 0.163135] clocksource: Switched to clocksource arch_sys_counter
[ 0.251727] VFS: Disk quotas dquot_6.6.0
[ 0.251861] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.252047] FS-Cache: Loaded
[ 0.252307] CacheFiles: Loaded
[ 0.253558] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes
[ 0.253595] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 0.264152] Console: switching to colour frame buffer device 228x61
[ 0.273572] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered!
[ 0.284222] NET: Registered PF_INET protocol family
[ 0.284662] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.286673] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.286805] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.286909] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.287147] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.287507] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.287811] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.287931] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.288277] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.289421] RPC: Registered named UNIX socket transport module.
[ 0.289508] RPC: Registered udp transport module.
[ 0.289567] RPC: Registered tcp transport module.
[ 0.289626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289712] PCI: CLS 0 bytes, default 64
[ 0.292353] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.292805] kvm [1]: IPA Size Limit: 44 bits
[ 0.294054] kvm [1]: vgic interrupt IRQ9
[ 0.294396] kvm [1]: Hyp mode initialized successfully
[ 1.082644] Initialise system trusted keyrings
[ 1.083180] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.090167] zbud: loaded
[ 1.092074] FS-Cache: Netfs 'nfs' registered for caching
[ 1.092860] NFS: Registering the id_resolver key type
[ 1.092967] Key type id_resolver registered
[ 1.093027] Key type id_legacy registered
[ 1.093199] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.093283] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.094600] Key type asymmetric registered
[ 1.094668] Asymmetric key parser 'x509' registered
[ 1.097468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.100351] io scheduler mq-deadline registered
[ 1.103008] io scheduler kyber registered
[ 1.113819] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.116478] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.119265] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.122061] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ 1.173247] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.176343] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.179047] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.181688] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.184471] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.187454] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.194233] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.197076] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.200124] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 1.206700] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.209418] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.212106] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.214708] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.228509] iproc-rng200 fe104000.rng: hwrng registered
[ 1.231576] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.235524] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.250871] brd: module loaded
[ 1.263482] loop: module loaded
[ 1.266757] Loading iSCSI transport class v2.0-870.
[ 1.274363] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.335297] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.339077] usbcore: registered new interface driver r8152
[ 1.341755] usbcore: registered new interface driver lan78xx
[ 1.344333] usbcore: registered new interface driver smsc95xx
[ 1.348393] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.350836] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.353421] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.355887] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.359092] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[ 1.362677] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.365081] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.367559] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.370486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.373067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.375605] usb usb1: Product: xHCI Host Controller
[ 1.378076] usb usb1: Manufacturer: Linux 5.15.61-v8+ xhci-hcd
[ 1.380592] usb usb1: SerialNumber: 0000:01:00.0
[ 1.383729] hub 1-0:1.0: USB hub found
[ 1.386268] hub 1-0:1.0: 1 port detected
[ 1.389736] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.392267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.394761] usb usb2: Product: xHCI Host Controller
[ 1.397297] usb usb2: Manufacturer: Linux 5.15.61-v8+ xhci-hcd
[ 1.399692] usb usb2: SerialNumber: 0000:01:00.0
[ 1.402849] hub 2-0:1.0: USB hub found
[ 1.405429] hub 2-0:1.0: 4 ports detected
[ 1.409546] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.412496] dwc_otg: FIQ enabled
[ 1.412509] dwc_otg: NAK holdoff enabled
[ 1.412519] dwc_otg: FIQ split-transaction FSM enabled
[ 1.412533] Module dwc_common_port init
[ 1.413122] usbcore: registered new interface driver uas
[ 1.415605] usbcore: registered new interface driver usb-storage
[ 1.418236] mousedev: PS/2 mouse device common for all mice
[ 1.425606] sdhci: Secure Digital Host Controller Interface driver
[ 1.428101] sdhci: Copyright(c) Pierre Ossman
[ 1.431016] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.436762] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.439790] hid: raw HID events driver (C) Jiri Kosina
[ 1.442364] usbcore: registered new interface driver usbhid
[ 1.444806] usbhid: USB HID core driver
[ 1.447548] ashmem: initialized
[ 1.458556] NET: Registered PF_PACKET protocol family
[ 1.461218] Key type dns_resolver registered
[ 1.464890] registered taskstats version 1
[ 1.467268] Loading compiled-in X.509 certificates
[ 1.470269] Key type ._fscrypt registered
[ 1.472657] Key type .fscrypt registered
[ 1.474978] Key type fscrypt-provisioning registered
[ 1.488843] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.491597] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.494137] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 17, base_baud = 0) is a PL011 rev2
[ 1.505576] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.508511] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.512132] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.514484] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.548535] of_cfs_init
[ 1.550995] of_cfs_init: OK
[ 1.581295] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.584324] Waiting for root device PARTUUID=dd08d348-03...
[ 1.643223] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.657404] mmc1: new high speed SDIO card at address 0001
[ 1.688892] mmc0: new ultra high speed DDR50 SDHC card at address 0001
[ 1.692400] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 1.698127] mmcblk0: p1 p2 p3
[ 1.701353] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 1.722066] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.724821] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
[ 1.733146] devtmpfs: mounted
[ 1.743885] Freeing unused kernel memory: 3840K
[ 1.746575] Run /sbin/init as init process
[ 1.748953] with arguments:
[ 1.748963] /sbin/init
[ 1.748972] with environment:
[ 1.748981] HOME=/
[ 1.748991] TERM=linux
[ 1.797834] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.800533] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.803279] usb 1-1: Product: USB2.0 Hub
[ 1.808522] hub 1-1:1.0: USB hub found
[ 1.811265] hub 1-1:1.0: 4 ports detected
[ 2.107217] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[ 2.228720] usb 1-1.1: New USB device found, idVendor=04d9, idProduct=1203, bcdDevice= 2.80
[ 2.231423] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.253768] input: HID 04d9:1203 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:04D9:1203.0001/input/input0
[ 2.320039] hid-generic 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:01:00.0-1.1/input0
[ 2.345264] input: HID 04d9:1203 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:04D9:1203.0002/input/input1
[ 2.407689] input: HID 04d9:1203 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:04D9:1203.0002/input/input2
[ 2.411382] hid-generic 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:01:00.0-1.1/input1
[ 2.499191] usb 1-1.2: new low-speed USB device number 4 using xhci_hcd
[ 2.614983] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c404, bcdDevice= 2.20
[ 2.618409] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.621743] usb 1-1.2: Product: Trackball
[ 2.625176] usb 1-1.2: Manufacturer: Logitech
[ 2.640985] input: Logitech Trackball as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C404.0003/input/input3
[ 2.645117] hid-generic 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:01:00.0-1.2/input0
[ 9.640603] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null). Quota mode: none.
[ 10.155512] Adding 2097148k swap on /dev/mmcblk0p2. Priority:-2 extents:1 across:2097148k SSFS
[ 14.032793] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 14.034258] bcmgenet fd580000.ethernet eth0: Link is Down
[ 16.046718] uart-pl011 fe201000.serial: no DMA platform data
[ 18.111370] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 31.711194] cam-dummy-reg: disabling
|
Last edited by JumboAg on Fri Oct 21, 2022 1:45 pm; edited 1 time in total |
|
| Back to top |
|
 |
pingtoo
Veteran
Joined: 10 Sep 2021
Posts: 1248
Location: Richmond Hill, Canada
|
| Posted: Wed Oct 19, 2022 2:18 pm Post subject: |
|
|
Can you share /boot/config.txt?
I suspect you disable your wifi in device tree. |
|
| Back to top |
|
|
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
| Posted: Wed Oct 19, 2022 2:22 pm Post subject: |
|
|
| Code: |
gentoopi ~ # cat /boot/config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
[all]
#dtoverlay=vc4-fkms-v3d
arm_64bit=1
|
And for good measure:
| Code: |
gentoopi /boot # cat cmdline.txt
console=serial0,115200 console=tty1 root=PARTUUID=dd08d348-03 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
|
|
|
| Back to top |
|
|
pingtoo
Veteran
Joined: 10 Sep 2021
Posts: 1248
Location: Richmond Hill, Canada
|
| Posted: Thu Oct 20, 2022 3:39 am Post subject: |
|
|
Thanks!
Or is it possible you blocklist modules?
Do you have brcmfmac and brcmutil both modules loaded? |
|
| Back to top |
|
|
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
| Posted: Thu Oct 20, 2022 9:08 pm Post subject: |
|
|
| according to lsmod, no modules are loading for me. I may have found my problem. Somehow my nodules directory doesnt seem to match my kernel version. Going to recompile everything and try cleaning things up for another try. |
|
| Back to top |
|
|
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
| Posted: Fri Oct 21, 2022 1:46 pm Post subject: |
|
|
| Confirmed: It was a version mismatch with all the modules. How I messed it up no idea but everything matches now and all the modules I would expect to see load have (including wireless) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on ARM
