| View previous topic :: View next topic |
| Author |
Message |
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
 Posted: Sun Feb 12, 2023 3:39 pm Post subject: SOLVED No video after mesondrmfb takes over from the EFI FB |
 |
|
Playing around with Gentoo on a Libre Potato (Amlogic SOC) and have run into a problem I cant get past.
I boot up OK and initially have video (I assume using the EFI framebuffer)
About midway through booting I lose video. The system isnt hanging, I can ssh into it, no problem and if I have something connected to the serial console, it doesn't throw any errors that I can tell.
Console info:
| Code: |
Booting /EFI\gentoo\grubaa64.efi
Welcome to GRUB!
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.19.0-g3d7cb6b04c3f (root@potatopitoo) (gcc (Gentoo 11.3.1_p20221209 p3) 11.3.1 20221209, GNU ld (Gentoo 2.39 p5) 2.39.0) #4 SMP PREEMPT Sat Feb 11 23:56:40 CST 2023
[ 0.000000] Machine model: Libre Computer AML-S905X-CC
[ 0.000000] efi: EFI v2.90 by Das U-Boot
[ 0.000000] efi: ESRT=0x7ae46040 RTPROP=0x7ae48040 SMBIOS=0x7ae4a000 RNG=0x5a368040 MEMRESERVE=0x5a367040
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: crng init done
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae46040 to 0x000000007ae46078.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7f3f4b40-0x7f3f6fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000005a367fff]
[ 0.000000] node 0: [mem 0x000000005a368000-0x000000005a368fff]
[ 0.000000] node 0: [mem 0x000000005a369000-0x000000007ae47fff]
[ 0.000000] node 0: [mem 0x000000007ae48000-0x000000007ae48fff]
[ 0.000000] node 0: [mem 0x000000007ae49000-0x000000007ae49fff]
[ 0.000000] node 0: [mem 0x000000007ae4a000-0x000000007ae50fff]
[ 0.000000] node 0: [mem 0x000000007ae51000-0x000000007de7ffff]
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff]
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007f806fff]
[ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 20 pages/cpu s44520 r8192 d29208 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.19.0-g3d7cb6b04c3f root=UUID=56a6f99d-85ec-4baa-83d8-4ffee9c8ad08 ro video=mesondrmfb:1920x1080
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.19.0-g3d7cb6b04c3f", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1685904K/2097152K available (17024K kernel code, 3414K rwdata, 9216K rodata, 6976K init, 596K bss, 149104K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001057] Console: colour dummy device 80x25
[ 0.001568] printk: console [tty0] enabled
[ 0.001655] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001681] pid_max: default: 32768 minimum: 301
[ 0.001747] LSM: Security Framework initializing
[ 0.001855] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001880] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003116] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003155] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003225] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003354] rcu: Hierarchical SRCU implementation.
[ 0.003366] rcu: Max phase no-delay instances is 1000.
[ 0.005497] Remapping and enabling EFI services.
[ 0.005860] smp: Bringing up secondary CPUs ...
[ 0.006354] Detected VIPT I-cache on CPU1
[ 0.006422] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006996] Detected VIPT I-cache on CPU2
[ 0.007053] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007592] Detected VIPT I-cache on CPU3
[ 0.007648] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007722] smp: Brought up 1 node, 4 CPUs
[ 0.007788] SMP: Total of 4 processors activated.
[ 0.007799] CPU features: detected: 32-bit EL0 Support
[ 0.007809] CPU features: detected: 32-bit EL1 Support
[ 0.007821] CPU features: detected: CRC32 instructions
[ 0.008369] CPU: All CPU(s) started at EL2
[ 0.008407] alternatives: patching kernel code
[ 0.009950] devtmpfs: initialized
[ 0.014502] KASLR enabled
[ 0.014694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014726] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.021242] pinctrl core: initialized pinctrl subsystem
[ 0.022205] SMBIOS 3.0 present.
[ 0.022244] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022
[ 0.022723] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.023912] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.024121] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.024269] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.024395] audit: initializing netlink subsys (disabled)
[ 0.024591] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
[ 0.025739] thermal_sys: Registered thermal governor 'step_wise'
[ 0.025752] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.026003] cpuidle: using governor menu
[ 0.026213] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.026335] ASID allocator initialised with 32768 entries
[ 0.026352] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.026365] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.026377] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.026390] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.027982] Serial: AMBA PL011 UART driver
[ 0.045288] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.047454] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.048238] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.059460] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.059495] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.059509] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.059522] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.124969] raid6: neonx8 gen() 2142 MB/s
[ 0.193047] raid6: neonx4 gen() 2193 MB/s
[ 0.261119] raid6: neonx2 gen() 2083 MB/s
[ 0.329182] raid6: neonx1 gen() 1780 MB/s
[ 0.397246] raid6: int64x8 gen() 1366 MB/s
[ 0.465328] raid6: int64x4 gen() 1603 MB/s
[ 0.533395] raid6: int64x2 gen() 1400 MB/s
[ 0.601458] raid6: int64x1 gen() 1034 MB/s
[ 0.601470] raid6: using algorithm neonx4 gen() 2193 MB/s
[ 0.669519] raid6: .... xor() 1557 MB/s, rmw enabled
[ 0.669532] raid6: using neon recovery algorithm
[ 0.670145] ACPI: Interpreter disabled.
[ 0.672902] iommu: Default domain type: Translated
[ 0.672933] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.673234] SCSI subsystem initialized
[ 0.673644] usbcore: registered new interface driver usbfs
[ 0.673690] usbcore: registered new interface driver hub
[ 0.673729] usbcore: registered new device driver usb
[ 0.674772] pps_core: LinuxPPS API ver. 1 registered
[ 0.674790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.674819] PTP clock support registered
[ 0.674948] EDAC MC: Ver: 3.0.0
[ 0.675936] Registered efivars operations
[ 0.676994] FPGA manager framework
[ 0.677105] Advanced Linux Sound Architecture Driver Initialized.
[ 0.677872] vgaarb: loaded
[ 0.678257] clocksource: Switched to clocksource arch_sys_counter
[ 0.678482] VFS: Disk quotas dquot_6.6.0
[ 0.678536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.678711] pnp: PnP ACPI: disabled
[ 0.683717] NET: Registered PF_INET protocol family
[ 0.683898] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.685475] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.685566] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.685593] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.685714] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.685920] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.686047] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.686106] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.686320] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.686695] RPC: Registered named UNIX socket transport module.
[ 0.686719] RPC: Registered udp transport module.
[ 0.686729] RPC: Registered tcp transport module.
[ 0.686738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.686755] PCI: CLS 0 bytes, default 64
[ 0.686967] Unpacking initramfs...
[ 0.698945] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.699487] kvm [1]: IPA Size Limit: 40 bits
[ 0.701215] kvm [1]: vgic interrupt IRQ9
[ 0.701332] kvm [1]: Hyp mode initialized successfully
[ 0.702720] Initialise system trusted keyrings
[ 0.702975] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.708770] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.709451] NFS: Registering the id_resolver key type
[ 0.709503] Key type id_resolver registered
[ 0.709513] Key type id_legacy registered
[ 0.709585] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.709599] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.709789] 9p: Installing v9fs 9p2000 file system support
[ 0.746638] xor: measuring software checksum speed
[ 0.750612] 8regs : 2518 MB/sec
[ 0.754568] 32regs : 2520 MB/sec
[ 0.758889] arm64_neon : 2315 MB/sec
[ 0.758916] xor: using function: 32regs (2520 MB/sec)
[ 0.758935] Key type asymmetric registered
[ 0.758947] Asymmetric key parser 'x509' registered
[ 0.759043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.759066] io scheduler mq-deadline registered
[ 0.759077] io scheduler kyber registered
[ 0.761464] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.776799] EINJ: ACPI disabled.
[ 0.798741] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
[ 0.808708] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.812650] SuperH (H)SCI(F) driver initialized
[ 0.813544] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart
[ 1.152781] Freeing initrd memory: 8672K
[ 1.153323] printk: console [ttyAML0] enabled
[ 1.968302] msm_serial: driver initialized
[ 1.979183] loop: module loaded
[ 1.980591] megasas: 07.719.03.00-rc1
[ 1.988239] tun: Universal TUN/TAP device driver, 1.6
[ 1.989555] thunder_xcv, ver 1.0
[ 1.990943] thunder_bgx, ver 1.0
[ 1.994088] nicpf, ver 1.0
[ 1.998619] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 2.003914] hns3: Copyright (c) 2017 Huawei Corporation.
[ 2.009250] hclge is initializing
[ 2.012456] e1000: Intel(R) PRO/1000 Network Driver
[ 2.017264] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.022990] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.027887] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.033769] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.039088] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.044632] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 2.050815] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.057250] sky2: driver version 1.30
[ 2.061842] VFIO - User Level meta-driver version: 0.3
[ 2.068603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.071888] ehci-pci: EHCI PCI platform driver
[ 2.076312] ehci-platform: EHCI generic platform driver
[ 2.081654] ehci-orion: EHCI orion driver
[ 2.085587] ehci-exynos: EHCI Exynos driver
[ 2.089706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.095699] ohci-pci: OHCI PCI platform driver
[ 2.100122] ohci-platform: OHCI generic platform driver
[ 2.105432] ohci-exynos: OHCI Exynos driver
[ 2.110202] usbcore: registered new interface driver usb-storage
[ 2.119434] i2c_dev: i2c /dev entries driver
[ 2.129582] sdhci: Secure Digital Host Controller Interface driver
[ 2.130141] sdhci: Copyright(c) Pierre Ossman
[ 2.135601] Synopsys Designware Multimedia Card Interface Driver
[ 2.142087] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.142213] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 2.151606] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.159156] efifb: probing for efifb
[ 2.161153] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k
[ 2.167520] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 2.173523] efifb: scrolling: redraw
[ 2.177057] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.189341] meson-gx-mmc d0074000.mmc: no support for card's volts
[ 2.189356] mmc1: error -22 whilst initialising SDIO card
[ 2.192774] Console: switching to colour frame buffer device 240x67
[ 2.213548] fb0: EFI VGA frame buffer device
[ 2.218437] meson-sm: secure-monitor enabled
[ 2.223808] usbcore: registered new interface driver usbhid
[ 2.227560] usbhid: USB HID core driver
[ 2.232877] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 2.247937] NET: Registered PF_PACKET protocol family
[ 2.248172] 9pnet: Installing 9P2000 support
[ 2.251729] Key type dns_resolver registered
[ 2.256253] registered taskstats version 1
[ 2.259960] Loading compiled-in X.509 certificates
[ 2.265634] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 2.294698] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 2.294799] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 2.816470] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 2.818192] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 2.825488] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.835409] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.837545] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.845303] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 2.851067] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 2.860444] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000
[ 2.866982] hub 1-0:1.0: USB hub found
[ 2.869965] hub 1-0:1.0: 2 ports detected
[ 2.879202] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 2.879727] deson-gx-mmc d0072000.mmc: Got CD GPIO
omain-0 init dvfs: 4
[ 2.906173] ALSA device list:
[ 2.906242] No soundcards found.
[ 2.916488] Freeing unused kernel memory: 6976K
[ 2.918377] Run /init as init process
[ 2.955043] mmc0: new high speed SDXC card at address aaaa
[ 2.956274] mmcblk0: mmc0:aaaa SD256 238 GiB
[ 2.963021] mmcblk0: p1 p2 p3
[ 3.126335] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 3.172428] dracut: Gentoo-2.9
[ 3.290722] mmc1: Card stuck being busy! __mmc_poll_for_busy
[ 3.314891] hub 1-1:1.0: USB hub found
[ 3.318115] hub 1-1:1.0: 4 ports detected
[ 3.510509] usb 1-2: new high-speed USB device number 3 using xhci-hcd
Starting version 251
[ 3.675654] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 3.679118] scsi host0: usb-storage 1-2:1.0
[ 3.750307] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
[ 3.964225] input: HID 04d9:1203 as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:1203.0001/input/input0
[ 4.035059] hid-generic 0003:04D9:1203.0001: input: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-xhci-hcd.0.auto-1.2/input0
[ 4.080960] input: HID 04d9:1203 System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1203.0002/input/input1
[ 4.154681] input: HID 04d9:1203 Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1203.0002/input/input2
[ 4.167162] hid-generic 0003:04D9:1203.0002: input: USB HID v1.11 Device [HID 04d9:1203] on usb-xhci-hcd.0.auto-1.2/input1
[ 4.230202] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.237691] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.694565] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem
[ 4.698613] EXT4-fs (mmcblk0p3): write access will be enabled during recovery
[ 4.706947] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 4.714671] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 4.722109] sd 0:0:0:0: [sda] Write Protect is off
[ 4.726498] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.739119] sda: sda1 sda2
[ 4.742720] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.838077] EXT4-fs (mmcblk0p3): recovery complete
[ 4.846240] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.963160] BTRFS: device label writable devid 1 transid 1780 /dev/sda2 scanned by systemd-udevd (297)
[ 4.986763] EXT4-fs (mmcblk0p3): unmounting filesystem.
[ 5.015916] dracut: Checking ext4: /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08
[ 5.023100] dracut: issuing e2fsck -a /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08
[ 5.083043] dracut: /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08: clean, 463970/15081472 files, 3611311/60305408 blocks
[ 5.100996] dracut: Mounting /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08 with -o noatime,ro
[ 5.765431] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none.
[ 5.877487] dracut: Mounted root filesystem /dev/mmcblk0p3
[ 6.102004] dracut: Switching root
INIT: version 3.05 booting
OpenRC 0.45.2 is starting up Gentoo Linux (aarch64)
* /proc is already mounted
* /run/openrc: creating directory
* /run/lock: correcting mode
* /run/lock: correcting owner
* Caching service dependencies ...
[ ok ]
* Caching service dependencies ...
[ ok ]
* Clock skew detected with `/etc/init.d'
* Adjusting mtime of `/run/openrc/deptree' to Sat Feb 11 20:16:53 2023
* WARNING: clock skew detected!
* Mounting security filesystem ...
[ ok ]
* Mounting debug filesystem ...
[ ok ]
* Mounting config filesystem ...
[ ok ]
* Mounting persistent storage (pstore) filesystem ...
[ ok ]
* Mounting efivarfs filesystem ...
[ ok ]
* Mounting cgroup filesystem ...
[ ok ]
* Remounting devtmpfs on /dev ...
[ ok ]
* Mounting /dev/mqueue ...
[ ok ]
* Creating list of required static device nodes for the current kernel ...
[ ok ]
* Create Static Devices Nodes in /dev ...
[ ok ]
* Starting udev ...
[ ok ]
* Generating a rule to create a /dev/root symlink ...
[ ok ]
* Populating /dev with existing devices through uevents ...
[ ok ]
* WARNING: clock skew detected!
[BL31]: tee size: 0
* Setting the local clock based on last shutdown time ...
[ ok ]
* Loading custom binary format handlers ...
[ ok ]
* Checking local filesystems ...
/dev/mmcblk0p3: clean, 463970/15081472 files, 3611311/60305408 blocks
fsck.fat 4.2 (2021-01-31)
/dev/mmcblk0p1: 1029 files, 34838/65206 clusters
[ ok ]
* Remounting root filesystem read/write ...
[ ok ]
* Remounting filesystems ...
[ ok ]
* Updating /etc/mtab ...
* Creating mtab symbolic link
[ ok ]
* Activating swap devices ...
[ ok ]
* Mounting local filesystems ...
[ ok ]
* Configuring kernel parameters ...
[ ok ]
* Creating user login records ...
[ ok ]
* Wiping /tmp directory ...
[ ok ]
* Setting hostname to potatopitoo from /etc/hostname ...
[ ok ]
* Setting terminal encoding [UTF-8] ...
[ ok ]
* Setting keyboard mode [UTF-8] ...
[ ok ]
* Loading key mappings [us] ...
[ ok ]
* Bringing up network interface lo ...
[ ok ]
* Saving key mapping ...
[ ok ]
* Saving terminal encoding ...
[ ok ]
* Seeding random number generator ...
* Seeding 256 bits and crediting
* Saving 256 bits of creditable seed for next boot
[ ok ]
* Create Volatile Files and Directories ...
[ ok ]
INIT: Entering runlevel: 3
* WARNING: clock skew detected!
* Starting sysklogd ...
[ ok ]
* Starting cronie ...
[ ok ]
* Bringing up interface eth0
* Caching network module dependencies
* 192.168.86.7 ...
[ ok ]
* Adding routes
* default via 192.168.86.1 ...
[ ok ]
[ ok ]
* Mounting network filesystems ...
[ ok ]
* Starting ntpd ...
[ ok ]
* Starting sshd ...
[ ok ]
* Starting local ...
[ ok ]
|
dmesg output:
| Code: |
$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.19.0-g3d7cb6b04c3f (root@potatopitoo) (gcc (Gentoo 11.3.1_p20221209 p3) 11.3.1 20221209, GNU ld (Gentoo 2.39 p5) 2.39.0) #4 SMP PREEMPT Sat Feb 11 23:56:40 CST 2023
[ 0.000000] Machine model: Libre Computer AML-S905X-CC
[ 0.000000] efi: EFI v2.90 by Das U-Boot
[ 0.000000] efi: ESRT=0x7ae46040 RTPROP=0x7ae48040 SMBIOS=0x7ae4a000 RNG=0x5a368040 MEMRESERVE=0x5a367040
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: crng init done
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae46040 to 0x000000007ae46078.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7f3f4b40-0x7f3f6fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000005a367fff]
[ 0.000000] node 0: [mem 0x000000005a368000-0x000000005a368fff]
[ 0.000000] node 0: [mem 0x000000005a369000-0x000000007ae47fff]
[ 0.000000] node 0: [mem 0x000000007ae48000-0x000000007ae48fff]
[ 0.000000] node 0: [mem 0x000000007ae49000-0x000000007ae49fff]
[ 0.000000] node 0: [mem 0x000000007ae4a000-0x000000007ae50fff]
[ 0.000000] node 0: [mem 0x000000007ae51000-0x000000007de7ffff]
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff]
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007f806fff]
[ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 20 pages/cpu s44520 r8192 d29208 u81920
[ 0.000000] pcpu-alloc: s44520 r8192 d29208 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.19.0-g3d7cb6b04c3f root=UUID=56a6f99d-85ec-4baa-83d8-4ffee9c8ad08 ro video=mesondrmfb:1920x1080
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.19.0-g3d7cb6b04c3f", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1685904K/2097152K available (17024K kernel code, 3414K rwdata, 9216K rodata, 6976K init, 596K bss, 149104K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001057] Console: colour dummy device 80x25
[ 0.001568] printk: console [tty0] enabled
[ 0.001655] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001681] pid_max: default: 32768 minimum: 301
[ 0.001747] LSM: Security Framework initializing
[ 0.001855] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001880] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003116] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003155] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003225] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003354] rcu: Hierarchical SRCU implementation.
[ 0.003366] rcu: Max phase no-delay instances is 1000.
[ 0.005497] Remapping and enabling EFI services.
[ 0.005860] smp: Bringing up secondary CPUs ...
[ 0.006354] Detected VIPT I-cache on CPU1
[ 0.006422] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006996] Detected VIPT I-cache on CPU2
[ 0.007053] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007592] Detected VIPT I-cache on CPU3
[ 0.007648] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007722] smp: Brought up 1 node, 4 CPUs
[ 0.007788] SMP: Total of 4 processors activated.
[ 0.007799] CPU features: detected: 32-bit EL0 Support
[ 0.007809] CPU features: detected: 32-bit EL1 Support
[ 0.007821] CPU features: detected: CRC32 instructions
[ 0.008369] CPU: All CPU(s) started at EL2
[ 0.008407] alternatives: patching kernel code
[ 0.009950] devtmpfs: initialized
[ 0.014502] KASLR enabled
[ 0.014694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014726] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.021242] pinctrl core: initialized pinctrl subsystem
[ 0.022205] SMBIOS 3.0 present.
[ 0.022244] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022
[ 0.022723] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.023912] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.024121] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.024269] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.024395] audit: initializing netlink subsys (disabled)
[ 0.024591] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
[ 0.025739] thermal_sys: Registered thermal governor 'step_wise'
[ 0.025752] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.026003] cpuidle: using governor menu
[ 0.026213] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.026335] ASID allocator initialised with 32768 entries
[ 0.026352] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.026365] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.026377] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.026390] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.027982] Serial: AMBA PL011 UART driver
[ 0.045288] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.047454] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.048238] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.059460] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.059495] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.059509] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.059522] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.124969] raid6: neonx8 gen() 2142 MB/s
[ 0.193047] raid6: neonx4 gen() 2193 MB/s
[ 0.261119] raid6: neonx2 gen() 2083 MB/s
[ 0.329182] raid6: neonx1 gen() 1780 MB/s
[ 0.397246] raid6: int64x8 gen() 1366 MB/s
[ 0.465328] raid6: int64x4 gen() 1603 MB/s
[ 0.533395] raid6: int64x2 gen() 1400 MB/s
[ 0.601458] raid6: int64x1 gen() 1034 MB/s
[ 0.601470] raid6: using algorithm neonx4 gen() 2193 MB/s
[ 0.669519] raid6: .... xor() 1557 MB/s, rmw enabled
[ 0.669532] raid6: using neon recovery algorithm
[ 0.670145] ACPI: Interpreter disabled.
[ 0.672902] iommu: Default domain type: Translated
[ 0.672933] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.673234] SCSI subsystem initialized
[ 0.673393] libata version 3.00 loaded.
[ 0.673644] usbcore: registered new interface driver usbfs
[ 0.673690] usbcore: registered new interface driver hub
[ 0.673729] usbcore: registered new device driver usb
[ 0.674772] pps_core: LinuxPPS API ver. 1 registered
[ 0.674790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.674819] PTP clock support registered
[ 0.674948] EDAC MC: Ver: 3.0.0
[ 0.675936] Registered efivars operations
[ 0.676994] FPGA manager framework
[ 0.677105] Advanced Linux Sound Architecture Driver Initialized.
[ 0.677872] vgaarb: loaded
[ 0.678257] clocksource: Switched to clocksource arch_sys_counter
[ 0.678482] VFS: Disk quotas dquot_6.6.0
[ 0.678536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.678711] pnp: PnP ACPI: disabled
[ 0.683717] NET: Registered PF_INET protocol family
[ 0.683898] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.685475] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.685566] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.685593] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.685714] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.685920] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.686047] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.686106] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.686320] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.686695] RPC: Registered named UNIX socket transport module.
[ 0.686719] RPC: Registered udp transport module.
[ 0.686729] RPC: Registered tcp transport module.
[ 0.686738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.686755] PCI: CLS 0 bytes, default 64
[ 0.686967] Unpacking initramfs...
[ 0.698945] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.699487] kvm [1]: IPA Size Limit: 40 bits
[ 0.701215] kvm [1]: vgic interrupt IRQ9
[ 0.701332] kvm [1]: Hyp mode initialized successfully
[ 0.702720] Initialise system trusted keyrings
[ 0.702975] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.708770] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.709451] NFS: Registering the id_resolver key type
[ 0.709503] Key type id_resolver registered
[ 0.709513] Key type id_legacy registered
[ 0.709585] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.709599] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.709789] 9p: Installing v9fs 9p2000 file system support
[ 0.746638] xor: measuring software checksum speed
[ 0.750612] 8regs : 2518 MB/sec
[ 0.754568] 32regs : 2520 MB/sec
[ 0.758889] arm64_neon : 2315 MB/sec
[ 0.758916] xor: using function: 32regs (2520 MB/sec)
[ 0.758935] Key type asymmetric registered
[ 0.758947] Asymmetric key parser 'x509' registered
[ 0.759043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.759066] io scheduler mq-deadline registered
[ 0.759077] io scheduler kyber registered
[ 0.761464] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.776799] EINJ: ACPI disabled.
[ 0.798741] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
[ 0.808708] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.812650] SuperH (H)SCI(F) driver initialized
[ 0.813544] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart
[ 1.152781] Freeing initrd memory: 8672K
[ 1.153323] printk: console [ttyAML0] enabled
[ 1.968302] msm_serial: driver initialized
[ 1.979183] loop: module loaded
[ 1.980591] megasas: 07.719.03.00-rc1
[ 1.988239] tun: Universal TUN/TAP device driver, 1.6
[ 1.989555] thunder_xcv, ver 1.0
[ 1.990943] thunder_bgx, ver 1.0
[ 1.994088] nicpf, ver 1.0
[ 1.998619] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 2.003914] hns3: Copyright (c) 2017 Huawei Corporation.
[ 2.009250] hclge is initializing
[ 2.012456] e1000: Intel(R) PRO/1000 Network Driver
[ 2.017264] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.022990] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.027887] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.033769] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.039088] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.044632] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 2.050815] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.057250] sky2: driver version 1.30
[ 2.061842] VFIO - User Level meta-driver version: 0.3
[ 2.068603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.071888] ehci-pci: EHCI PCI platform driver
[ 2.076312] ehci-platform: EHCI generic platform driver
[ 2.081654] ehci-orion: EHCI orion driver
[ 2.085587] ehci-exynos: EHCI Exynos driver
[ 2.089706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.095699] ohci-pci: OHCI PCI platform driver
[ 2.100122] ohci-platform: OHCI generic platform driver
[ 2.105432] ohci-exynos: OHCI Exynos driver
[ 2.110202] usbcore: registered new interface driver usb-storage
[ 2.119434] i2c_dev: i2c /dev entries driver
[ 2.129582] sdhci: Secure Digital Host Controller Interface driver
[ 2.130141] sdhci: Copyright(c) Pierre Ossman
[ 2.135601] Synopsys Designware Multimedia Card Interface Driver
[ 2.142087] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.142213] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 2.151606] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.159156] efifb: probing for efifb
[ 2.161153] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k
[ 2.167520] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 2.173523] efifb: scrolling: redraw
[ 2.177057] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.189341] meson-gx-mmc d0074000.mmc: no support for card's volts
[ 2.189356] mmc1: error -22 whilst initialising SDIO card
[ 2.192774] Console: switching to colour frame buffer device 240x67
[ 2.213548] fb0: EFI VGA frame buffer device
[ 2.218437] meson-sm: secure-monitor enabled
[ 2.223808] usbcore: registered new interface driver usbhid
[ 2.227560] usbhid: USB HID core driver
[ 2.232877] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 2.247937] NET: Registered PF_PACKET protocol family
[ 2.248172] 9pnet: Installing 9P2000 support
[ 2.251729] Key type dns_resolver registered
[ 2.256253] registered taskstats version 1
[ 2.259960] Loading compiled-in X.509 certificates
[ 2.265634] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 2.294698] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 2.294799] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 2.816470] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 2.818192] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 2.825488] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.835409] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.837545] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.845303] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 2.851067] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 2.860444] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000
[ 2.866982] hub 1-0:1.0: USB hub found
[ 2.869965] hub 1-0:1.0: 2 ports detected
[ 2.879202] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 2.879727] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.906173] ALSA device list:
[ 2.906242] No soundcards found.
[ 2.916488] Freeing unused kernel memory: 6976K
[ 2.918377] Run /init as init process
[ 2.919056] with arguments:
[ 2.919060] /init
[ 2.919063] with environment:
[ 2.919066] HOME=/
[ 2.919069] TERM=linux
[ 2.919073] BOOT_IMAGE=/vmlinuz-5.19.0-g3d7cb6b04c3f
[ 2.955043] mmc0: new high speed SDXC card at address aaaa
[ 2.956274] mmcblk0: mmc0:aaaa SD256 238 GiB
[ 2.963021] mmcblk0: p1 p2 p3
[ 3.126335] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 3.172428] dracut: Gentoo-2.9
[ 3.290722] mmc1: Card stuck being busy! __mmc_poll_for_busy
[ 3.314891] hub 1-1:1.0: USB hub found
[ 3.318115] hub 1-1:1.0: 4 ports detected
[ 3.510509] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 3.675654] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 3.679118] scsi host0: usb-storage 1-2:1.0
[ 3.750307] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
[ 3.964225] input: HID 04d9:1203 as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:1203.0001/input/input0
[ 4.035059] hid-generic 0003:04D9:1203.0001: input: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-xhci-hcd.0.auto-1.2/input0
[ 4.080960] input: HID 04d9:1203 System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1203.0002/input/input1
[ 4.154681] input: HID 04d9:1203 Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1203.0002/input/input2
[ 4.167162] hid-generic 0003:04D9:1203.0002: input: USB HID v1.11 Device [HID 04d9:1203] on usb-xhci-hcd.0.auto-1.2/input1
[ 4.230202] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.237691] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.694565] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem
[ 4.698613] EXT4-fs (mmcblk0p3): write access will be enabled during recovery
[ 4.706947] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 4.714671] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 4.722109] sd 0:0:0:0: [sda] Write Protect is off
[ 4.726026] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.726498] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.739119] sda: sda1 sda2
[ 4.742720] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.838077] EXT4-fs (mmcblk0p3): recovery complete
[ 4.846240] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.963160] BTRFS: device label writable devid 1 transid 1780 /dev/sda2 scanned by systemd-udevd (297)
[ 4.986763] EXT4-fs (mmcblk0p3): unmounting filesystem.
[ 5.015916] dracut: Checking ext4: /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08
[ 5.023100] dracut: issuing e2fsck -a /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08
[ 5.083043] dracut: /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08: clean, 463970/15081472 files, 3611311/60305408 blocks
[ 5.100996] dracut: Mounting /dev/disk/by-uuid/56a6f99d-85ec-4baa-83d8-4ffee9c8ad08 with -o noatime,ro
[ 5.765431] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none.
[ 5.877487] dracut: Mounted root filesystem /dev/mmcblk0p3
[ 6.102004] dracut: Switching root
[ 12.300011] Registered IR keymap rc-empty
[ 12.300125] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
[ 12.300249] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input3
[ 12.300595] meson-ir c8100580.ir: receiver initialized
[ 12.305874] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 12.305893] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 12.306037] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 12.307984] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 12.308012] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 12.308020] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 12.308025] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 12.308030] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 12.308036] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 12.308041] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 12.308159] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 12.308171] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 12.308176] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 12.380666] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 12.380778] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 12.380886] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 12.380993] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 12.381048] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 12.381063] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 12.389031] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 12.389754] lima d00c0000.gpu: bus rate = 166666667
[ 12.389778] lima d00c0000.gpu: mod rate = 24000000
[ 12.389874] lima d00c0000.gpu: error -ENODEV: dev_pm_opp_set_regulators: no regulator (mali) found
[ 12.390876] lima d00c0000.gpu: Failed to register cooling device
[ 12.392588] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0
[ 12.413136] Console: switching to colour dummy device 80x25
[ 12.446644] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 12.473900] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 12.486433] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 12.529800] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1
[ 12.758302] rc rc0: two consecutive events of type space
[ 13.147058] Console: switching to colour frame buffer device 240x67
[ 13.179055] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 13.371573] EXT4-fs (mmcblk0p3): re-mounted. Quota mode: none.
[ 13.754956] Adding 8388604k swap on /dev/mmcblk0p2. Priority:-2 extents:1 across:8388604k SS
[ 17.529043] meson8b-dwmac c9410000.ethernet eth0: PHY [mdio_mux-0.e40908ff:08] driver [Meson GXL Internal PHY] (irq=33)
[ 17.533986] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 17.545238] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 17.545284] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 17.546143] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[ 18.564538] NET: Registered PF_INET6 protocol family
[ 18.565750] Segment Routing with IPv6
[ 18.565799] In-situ OAM (IOAM) with IPv6
[ 19.263021] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 19.263343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
|
My guess is its something with the mesondrmfb module.
Last edited by JumboAg on Mon Feb 13, 2023 2:57 pm; edited 2 times in total |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54578
Location: 56N 3W
|
| Posted: Sun Feb 12, 2023 3:53 pm Post subject: |
|
|
JumboAg
Your dmesg shows
| Code: | [ 0.813544] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart
[ 1.152781] Freeing initrd memory: 8672K
[ 1.153323] printk: console [ttyAML0] enabled |
which is a serial port
and later
| Code: | [ 2.159156] efifb: probing for efifb
[ 2.161153] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k
[ 2.167520] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 2.173523] efifb: scrolling: redraw
[ 2.177057] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
and later still
| Code: | [ 12.380666] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 12.380778] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 12.380886] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 12.380993] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 12.381048] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 12.381063] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 12.389031] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 12.389754] lima d00c0000.gpu: bus rate = 166666667
[ 12.389778] lima d00c0000.gpu: mod rate = 24000000
[ 12.389874] lima d00c0000.gpu: error -ENODEV: dev_pm_opp_set_regulators: no regulator (mali) found
[ 12.390876] lima d00c0000.gpu: Failed to register cooling device
[ 12.392588] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0
[ 12.413136] Console: switching to colour dummy device 80x25
[ 12.446644] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 12.473900] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 12.486433] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 12.529800] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1
[ 12.758302] rc rc0: two consecutive events of type space
[ 13.147058] Console: switching to colour frame buffer device 240x67
[ 13.179055] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device |
That | Code: | [ 12.389874] lima d00c0000.gpu: error -ENODEV: dev_pm_opp_set_regulators: no regulator (mali) found
[ 12.390876] lima d00c0000.gpu: Failed to register cooling device |
suggests that the kernel cannot control the voltage regulator for the GPU, so its not powered up.
That can be a kernel option missing or a dtb option wrong or missing.
As its an EFI device, the dtb is probably provided by the EFI firmware, so a dtb problem is unlikely.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
| Posted: Sun Feb 12, 2023 6:46 pm Post subject: |
|
|
| Apparently that's a normal warning on the amlogic boards as they dont have that regulator. I was able to get a display by explicitly forcing the display resolution all the way down to "video=1024x768" in my kernel command line arguments. Doesnt like 1920x1080 for some reason. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on ARM
