RaynoVox n00b
Joined: 01 May 2024 Posts: 1
|
Posted: Wed May 01, 2024 3:45 pm Post subject: [Solved] No Output or Input Devices Found |
|
|
Solved: I didn't have media-video/wireplumber installed, I also was not in the pipewire group. I added myself to the pipewire group and installed wireplumber.
Then enabled wireplumber as a service with:
systemctl --user enable wireplumber.service
systemctl --user start wireplumber.service
----------------------------------------
Hi everyone, my Gentoo installation went great, KDE installation went well too.
My issue is I have No output or Input devices found in the System Settings and on the applet.
I'm using Systemd and 6.6.28-gentoo-dist
lspci | grep -i audio
Code: | 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) |
/etc/portage/make.conf
Code: | # These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
COMMON_FLAGS="-O2 -pipe -march=native"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
# NOTE: This stage was built with the bindist Use flag enabled
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C.utf8
USE="X alsa udev pulseaudio dracut grub systemd qt5 kde dvd alsa cdr uki -ukify modules-sign -refind -systemd-boot"
VIDEO_CARDS="intel"
ACCEPT_LICENSE="-* * @FREE @BINARY-REDISTRIBUTABLE"
GRUB_PLATFORMS="efi-64"
INPUT_DEVICES="libinput synaptics"
|
aplay -l
Code: | **** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3227 Analog [ALC3227 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
|
systemctl --user status pipewire.service
Code: | ● pipewire.service - PipeWire Multimedia Service
Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
Active: active (running) since Wed 2024-05-01 11:33:49 EDT; 1min 12s ago
TriggeredBy: ● pipewire.socket
Main PID: 7022 (pipewire)
Tasks: 4 (limit: 9357)
Memory: 2.1M (peak: 2.6M)
CPU: 47ms
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
└─7022 /usr/bin/pipewire
May 01 11:33:49 hp-laptopgentoo systemd[670]: Started PipeWire Multimedia Service. |
cat /var/lib/portage/world
Code: | app-admin/sudo
app-misc/neofetch
app-portage/gentoolkit
app-shells/bash-completion
kde-apps/dolphin
kde-apps/kate
kde-apps/kcalc
kde-apps/konsole
kde-plasma/oxygen
kde-plasma/plasma-browser-integration
kde-plasma/plasma-disks
kde-plasma/plasma-firewall
kde-plasma/plasma-meta
kde-plasma/plasma-systemmonitor
mail-client/thunderbird-bin
media-plugins/alsa-plugins
media-sound/alsa-utils
media-sound/pavucontrol
media-sound/pulseaudio
media-video/pipewire
net-im/discord
net-misc/chrony
net-misc/dhcpcd
net-misc/networkmanager
net-wireless/iw
net-wireless/wpa_supplicant
sys-apps/mlocate
sys-apps/systemd
sys-block/io-scheduler-udev-rules
sys-boot/grub
sys-firmware/alsa-firmware
sys-firmware/intel-microcode
sys-firmware/sof-firmware
sys-fs/xfsprogs
sys-kernel/gentoo-kernel
sys-kernel/linux-firmware
www-client/firefox-bin
x11-base/xorg-server
x11-drivers/xf86-video-intel |
I dont know much about alsa,pipewire or pulseaudio any ideas? Thank you
EDIT:
lspci -nnk
Code: | 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP HD Audio [103c:8328]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl, snd_soc_avs, snd_sof_pci_intel_skl
|
equery u pipewire
Code: | [ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for media-video/pipewire-1.0.4:
U I
+ + X : Enable audible bell for X11
- - abi_x86_32 : 32-bit (x86) libraries
+ + bluetooth : Enable Bluetooth Support
+ + dbus : Enable dbus support for anything that needs it (gpsd, gnomemeeting, etc)
- - doc : Add extra documentation (API, Javadoc, etc). It is recommended to enable per package instead of globally
- - echo-cancel : Enable WebRTC-based echo canceller via media-libs/webrtc-audio-processing
+ + extra : Build pw-cat/pw-play/pw-record
+ + ffmpeg : Enable ffmpeg/libav-based audio/video codec support
- - flatpak : Enable Flatpak support
+ + gsettings : Use gsettings (dev-libs/glib) to read/save used modules (useful for e.g. media-sound/paprefs
- - gstreamer : Add support for media-libs/gstreamer (Streaming media)
- - ieee1394 : Enable FireWire/iLink IEEE1394 support (dv, camera, ...)
- - jack-client : Install a plugin for running PipeWire as a JACK client
- - jack-sdk : Use PipeWire as JACK replacement
- - liblc3 : Allow loading LC3 plugins via media-sound/liblc3
- - lv2 : Allow loading LV2 plugins via media-libs/lv2
- - man : Build and install man pages
- - modemmanager : Combined with USE=bluetooth, allows PipeWire to perform telephony on mobile devices.
+ + pipewire-alsa : Replace PulseAudio's ALSA plugin with PipeWire's plugin
+ + readline : Enable support for libreadline, a GNU line-editing library that almost everyone wants
- - roc : Enable roc support for real-time audio streaming over the network, using media-libs/roc-toolkit. See
https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/Network#roc
+ + sound-server : Provide sound server using ALSA and bluetooth devices
+ + ssl : Enable raop-sink support (needs dev-libs/openssl)
+ + systemd : Enable use of systemd-specific libraries and features like socket activation or session tracking
- - test : Enable dependencies and/or preparations necessary to run tests (usually controlled by FEATURES=test but can be toggled independently)
- - v4l : Enable support for video4linux (using linux-headers or userspace libv4l libraries)
- - zeroconf : Support for DNS Service Discovery (DNS-SD)
|
|
|