| View previous topic :: View next topic |
| Author |
Message |
gcyoung
Apprentice
Joined: 04 Jul 2007
Posts: 174
Location: England
|
 Posted: Thu Jun 13, 2024 8:06 pm Post subject: python 3.12 upgrade: no wheel name returned |
 |
|
Admin edit: Split from Stuck in python 3.12 upgrade I believe. as this issue appears unrelated and worth of its own topic. --pjp
I have managed to muck up my system too, using 'a safer approach' . I managed to get python12 installed. with just
a couple of items set in 'package use' to: | Code: | | python_single_target_python3_11 |
. However; I was foolish enough
to imagine that if 'the package manager will try to switch automatically on the next upgrade following the change',any
upgrade would not include a requirement for python11. (This is not a complaint, but a warning to others who might also
have misunderstood.)
Came the next upgrade, and with it, a demand for a host of packages seeking to use python11!.
So... I tried resetting back to both python versions and only worsened the mess.
I have now reverted back to an earlier backup version of Gentoo but find on my attempts to upgrade, I get repeat stoppages
with compaints of: | Code: | | no wheel name returned |
I have very little knowledge of python, but I have managed to find out what a wheel name is and does, but not how to set it.
I presume it will identify the need for both versions of python to be used.
I need to know how and what to set the wheel name. Can anyone oblige? |
|
| Back to top |
|
 |
logrusx
Veteran
Joined: 22 Feb 2018
Posts: 1757
|
| Posted: Fri Jun 14, 2024 5:09 am Post subject: Re: python 3.12 upgrade: no wheel name returned |
|
|
| gcyoung wrote: |
Came the next upgrade, and with it, a demand for a host of packages seeking to use python11!. |
That's unlikely to happen on its own.
The last such issue I helped get solved included a world pollution cleanup. When you have something in world that's old and should not be there first place and one of it's newer dependencies gets an update but it wants a lower version, it starts to require the older, rather than the newer available version of its dependency if it's still in three and such things happen.
Here's the thread: https://forums.gentoo.org/viewtopic-p-8829892.html
While my suspicion wasn't confirmed as the root cause of the issue, it was still confirmed, so it's worth a try.
Best Regards,
Georgi
Last edited by logrusx on Fri Jun 14, 2024 9:13 am; edited 1 time in total |
|
| Back to top |
|
|
sam_
Developer
Joined: 14 Aug 2020
Posts: 1722
|
| Posted: Fri Jun 14, 2024 6:43 am Post subject: |
|
|
Please share the full build.log and emerge --info.
The full output of 'emerge -p -uvDU @world' could help too. |
|
| Back to top |
|
|
gcyoung
Apprentice
Joined: 04 Jul 2007
Posts: 174
Location: England
|
| Posted: Sun Jun 16, 2024 3:09 pm Post subject: |
|
|
I think I have tried every possible configuration including '-uDU @world' but always get a breakage or 'no wheel name returned' for my pains. I have gained some information on 'python wheel name', but it seems to require a complicated formation including data I don't have. I assume that normally it will have been set up in Gentoo when python was originally installed. I tried re-installing dev-lang/python in the hope that would solve the problem, but then received too many errors to make it worth while continuing. It seemed that some python dependencies required python to compile them! I have tried working on three reloads of my backup without success, so I must assume that any corruption must have existed at the time of the backup.
So.... I have now decided to take extreme measures and have started up 'emerge -euND --with-bdeps=y @world'. I haven't yet reached any python yet, but so far it is still running. I think it will take about 30 hours to complete if successful. I will post the result.
Thank to respondents above. Your interest will alway help to boost morale! |
|
| Back to top |
|
|
logrusx
Veteran
Joined: 22 Feb 2018
Posts: 1757
|
| Posted: Sun Jun 16, 2024 3:15 pm Post subject: |
|
|
If you want to get help, you should provide the information you're asked for. Especially when a developer comes to help. Your idea of emerge -e is pointless. Do not proceed with it but provide the information Sam asked for.
Best Regards,
Georgi |
|
| Back to top |
|
|
gcyoung
Apprentice
Joined: 04 Jul 2007
Posts: 174
Location: England
|
| Posted: Sun Jun 16, 2024 8:20 pm Post subject: |
|
|
**********Edit made later after posting ***********
On reading through the 'info file' after posting I noticed that it contains. That should not
have been so, and python3_11 is enabled in my package.use file. That must have been kept from when I had only python3_12 enabled.
************************
Yes Georgi, you are right, and I am not so arrogant as to do that, but I had asked for information about 'wheel name', since
it was consistently given as the failure I had over 3 full days of puzzling out and around merging with various options, including
the one given above, ie:'-uvDU'. It seemed logical to me that the failure must have something to do with that. There had not
been any reply to my request for information on that..
However, my last attempt, a full merge, has met with the same result at app-arch/brotli, with the same report, | Quote: | | no wheel name returned |
,
so it seems the path (metaphoric), I have been following will not achieve the desired result, and I must turn in another direction, and request help for that.
The following is the contents of my resultant 'emerge info' after the full merge I mentioned before.
| Quote: | Portage 3.0.63 (python 3.12.3-final-0, default/linux/amd64/23.0/systemd, gcc-13, glibc-2.39-r6, 6.8.9-zen1 x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-6.8.9-zen1-x86_64-AMD_Ryzen_3_4100_4-Core_Processor-with-glibc2.39
KiB Mem: 16151652 total, 6186364 free
KiB Swap: 2047996 total, 2047996 free
Timestamp of repository gentoo: Sun, 16 Jun 2024 10:00:00 +0000
Head commit of repository gentoo: 60932f3a2430841494230e8518bb0cc5ef41a0b6
sh bash 5.1_p16-r11
ld GNU ld (Gentoo 2.40 p7) 2.40.0
ccache version 4.9.1 [enabled]
app-misc/pax-utils: 1.3.7::gentoo
app-shells/bash: 5.1_p16-r11::gentoo
dev-build/autoconf: 2.71-r7::gentoo
dev-build/automake: 1.16.5-r2::gentoo
dev-build/cmake: 3.28.5::gentoo
dev-build/libtool: 2.4.7-r4::gentoo
dev-build/make: 4.4.1-r1::gentoo
dev-build/meson: 1.4.0-r1::gentoo
dev-java/java-config: 2.3.3-r1::gentoo
dev-lang/perl: 5.38.2-r3::gentoo
dev-lang/python: 3.11.9-r1::gentoo, 3.12.3-r1::gentoo
dev-lang/rust: 1.77.1::gentoo
dev-util/ccache: 4.9.1-r1::gentoo
sys-apps/baselayout: 2.15::gentoo
sys-apps/sandbox: 2.38::gentoo
sys-apps/systemd: 255.7::gentoo
sys-devel/binutils: 2.42-r1::gentoo
sys-devel/binutils-config: 5.5::gentoo
sys-devel/clang: 15.0.7-r3::gentoo, 17.0.6::gentoo
sys-devel/gcc: 11.4.1_p20240111::gentoo, 13.2.1_p20240210::gentoo
sys-devel/gcc-config: 2.11::gentoo
sys-devel/lld: 15.0.7::gentoo, 17.0.6::gentoo
sys-devel/llvm: 15.0.7-r3::gentoo, 17.0.6::gentoo
sys-kernel/linux-headers: 6.6-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.39-r6::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
volatile: True
sync-rsync-extra-opts:
sync-rsync-verify-max-age: 3
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-jobs: 1
x-portage
location: /usr/local/portage
masters: gentoo
priority: 0
volatile: True
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=znver2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/san>
CXXFLAGS="-march=znver2 -O2 -pipe"
DISTDIR="/distfiles"
EMERGE_DEFAULT_OPTS="--autounmask=y"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_>
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs buildpkg-live ccache config-protect-if-modified distlocks ebuild-locks fixlafile>
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="https://mirror.bytemark.co.uk/gentoo/ https://mirrors.evoluso.com/gentoo/ https://mirrors.ircam.fr/pub/gentoo-distfiles/ h>
LANG="en_GB.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs"
LEX="flex"
MAKEOPTS="-j4"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readabl>
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="3dnowprefetch X aac ac3 acl alsa amd64 avi bluetooth bzip2 cairo cdda cdrom cet cgi cgid cpu_flags_86_ssse3 crypt cups dbus divx dri3 dv dvb dvd >
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EXTRA_ECONF, F77FLAGS, FC, GCOV, G>
=================================================================
Package Settings
=================================================================
app-arch/brotli-1.1.0::gentoo was built with the following:
USE="python -debug -test" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python3_12 -python3_10 -python3_11"
FEATURES="binpkg-logs qa-unresolved-soname-deps merge-wait preserve-libs unmerge-logs binpkg-
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="https://mirror.bytemark.co.uk/gentoo/ https://mirrors.evoluso.com/gentoo/ https://mirrors.ircam.fr/pub/gentoo-distfiles/ h>
LANG="en_GB.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs"
LEX="flex"
MAKEOPTS="-j4"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readabl>
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="3dnowprefetch X aac ac3 acl alsa amd64 avi bluetooth bzip2 cairo cdda cdrom cet cgi cgid cpu_flags_86_ssse3 crypt cups dbus divx dri3 dv dvb dvd >
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EXTRA_ECONF, F77FLAGS, FC, GCOV, G>
=================================================================
Package Settings
=================================================================
app-arch/brotli-1.1.0::gentoo was built with the following:
USE="python -debug -test" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python3_12 -python3_10 -python3_11"
FEATURES="binpkg-logs qa-unresolved-soname-deps merge-wait preserve-libs unmerge-logs binpkg-dostrip distlocks config-protect-if-modified pid-sandbox >
|
|
|
| Back to top |
|
|
eschwartz
n00b
Joined: 29 Oct 2023
Posts: 39
|
| Posted: Sun Jun 16, 2024 9:47 pm Post subject: |
|
|
| gcyoung wrote: |
Yes Georgi, you are right, and I am not so arrogant as to do that, but I had asked for information about 'wheel name', since
it was consistently given as the failure I had over 3 full days of puzzling out and around merging with various options, including
the one given above, ie:'-uvDU'. It seemed logical to me that the failure must have something to do with that. There had not
been any reply to my request for information on that..
|
The arrogance here is that the Gentoo Developers told you to give specific information, because they know that you are chasing a red herring and "wheel name" isn't even the actual error you got.
You see, they wrote the code that emits the "wheel name" message, and hence know how it works.
You are incorrect to think it has anything to do with your issue, but if you would post the build.log then people would be happy to use the information from it to help answer your problem. 
| gcyoung wrote: |
However, my last attempt, a full merge, has met with the same result at app-arch/brotli, with the same report, | Quote: | | no wheel name returned |
,
so it seems the path (metaphoric), I have been following will not achieve the desired result, and I must turn in another direction, and request help for that.
The following is the contents of my resultant 'emerge info' after the full merge I mentioned before.
|
Thank you for the first half of the requested information.
Can you also upload the second half of the requested information -- and the more important half, as it happens -- that being the build.log? |
|
| Back to top |
|
|
dargueta
n00b
Joined: 09 Jun 2024
Posts: 3
|
| Posted: Mon Jun 17, 2024 2:53 am Post subject: |
|
|
I'm having the same problem and while "no wheel name returned" is the last error returned, it's not the root cause. I was having a massive headache trying to do the normal "don't touch anything and it'll work on its own" -- specifically with setuptools breaking -- so I tried doing the "safe upgrade" path. It didn't fix anything.
The problem appears to be setuptools's distutils import path hack is not working. Python 3.12 removed the distutils package from the standard library, so setuptools vendored it and did some fancy import path hacking to redirect `import distutils` to their own vendored version. Because this isn't working, it the import path doesn't get modified, and anything relying on setuptools (which is A LOT of stuff) will not upgrade.
build.log
| Code: |
* Package: dev-python/setuptools-70.0.0:0
* Repository: gentoo
* Maintainer: python@gentoo.org
* USE: abi_x86_64 amd64 elibc_glibc kernel_linux python_targets_python3_12
* FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox
>>> Unpacking source...
>>> Unpacking setuptools-70.0.0.tar.gz to /var/tmp/portage/dev-python/setuptools-70.0.0/work
>>> Source unpacked in /var/tmp/portage/dev-python/setuptools-70.0.0/work
>>> Preparing source in /var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0 ...
* Applying setuptools-62.4.0-py-compile.patch ... [ ok ]
* Build system packages:
* dev-python/gpep517 : 16
* dev-python/installer : 0.7.0
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0 ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0 ...
* python3_12: running distutils-r1_run_phase distutils-r1_python_compile
* Building the wheel for setuptools-70.0.0 via setuptools.build_meta
python3.12 -m gpep517 build-wheel --prefix=/usr --backend setuptools.build_meta --output-fd 3 --wheel-dir /var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0-python3_12/wheel
Traceback (most recent call last):
File "<frozen runpy>", line 198, in _run_module_as_main
File "<frozen runpy>", line 88, in _run_code
File "/usr/lib/python3.12/site-packages/gpep517/__main__.py", line 443, in <module>
sys.exit(main())
^^^^^^
File "/usr/lib/python3.12/site-packages/gpep517/__main__.py", line 439, in main
return func(args)
^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/gpep517/__main__.py", line 229, in build_wheel
print(build_wheel_impl(args, args.wheel_dir), file=out)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/gpep517/__main__.py", line 212, in build_wheel_impl
backend = importlib.import_module(package)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/importlib/__init__.py", line 90, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "<frozen importlib._bootstrap>", line 1387, in _gcd_import
File "<frozen importlib._bootstrap>", line 1360, in _find_and_load
File "<frozen importlib._bootstrap>", line 1310, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed
File "<frozen importlib._bootstrap>", line 1387, in _gcd_import
File "<frozen importlib._bootstrap>", line 1360, in _find_and_load
File "<frozen importlib._bootstrap>", line 1331, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 935, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 995, in exec_module
File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed
File "/var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0/setuptools/__init__.py", line 9, in <module>
import distutils.core
ModuleNotFoundError: No module named 'distutils'
* ERROR: dev-python/setuptools-70.0.0::gentoo failed (compile phase):
* Wheel build failed
*
* Call stack:
* ebuild.sh, line 136: Called src_compile
* environment, line 4140: Called distutils-r1_src_compile
* environment, line 2084: Called _distutils-r1_run_foreach_impl 'distutils-r1_python_compile'
* environment, line 884: Called python_foreach_impl 'distutils-r1_run_phase' 'distutils-r1_python_compile'
* environment, line 3750: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
* environment, line 3256: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
* environment, line 3254: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'distutils-r1_python_compile'
* environment, line 1389: Called distutils-r1_run_phase 'distutils-r1_python_compile'
* environment, line 2066: Called distutils-r1_python_compile
* environment, line 1884: Called distutils_pep517_install '/var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0-python3_12/install'
* environment, line 2412: Called die
* The specific snippet of code:
* [[ -n ${wheel} ]] || die "No wheel name returned";
*
* If you need support, post the output of `emerge --info '=dev-python/setuptools-70.0.0::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-python/setuptools-70.0.0::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-python/setuptools-70.0.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-python/setuptools-70.0.0/temp/environment'.
* Working directory: '/var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0'
* S: '/var/tmp/portage/dev-python/setuptools-70.0.0/work/setuptools-70.0.0'
|
emerge --info
| Code: |
Portage 3.0.63 (python 3.12.3-final-0, default/linux/amd64/23.0/desktop/gnome, gcc-13, glibc-2.39-r6, 6.6.30-gentoo-dist x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-6.6.30-gentoo-dist-x86_64-Intel-R-_Core-TM-_i5-7200U_CPU_@_2.50GHz-with-glibc2.39
KiB Mem: 8015364 total, 250772 free
KiB Swap: 16777212 total, 14332572 free
Timestamp of repository gentoo: Sat, 15 Jun 2024 14:00:00 +0000
Head commit of repository gentoo: 21a02bb496a21a35a75e6a8d37a66ce785229603
Head commit of repository brave-overlay: d625d99a411919fc02d4ed91cd5e15f17b95dfd5
sh bash 5.1_p16-r6
ld GNU ld (Gentoo 2.42 p3) 2.42.0
app-misc/pax-utils: 1.3.7::gentoo
app-shells/bash: 5.1_p16-r6::gentoo
dev-build/autoconf: 2.13-r8::gentoo, 2.71-r7::gentoo
dev-build/automake: 1.16.5-r2::gentoo
dev-build/cmake: 3.28.5::gentoo
dev-build/libtool: 2.4.7-r4::gentoo
dev-build/make: 4.4.1-r1::gentoo
dev-build/meson: 1.4.0-r1::gentoo
dev-lang/perl: 5.38.2-r3::gentoo
dev-lang/python: 3.11.9-r1::gentoo, 3.12.3-r1::gentoo
dev-lang/rust-bin: 1.77.1::gentoo
sys-apps/baselayout: 2.15::gentoo
sys-apps/openrc: 0.54::gentoo
sys-apps/sandbox: 2.38::gentoo
sys-devel/binutils: 2.42-r1::gentoo
sys-devel/binutils-config: 5.5::gentoo
sys-devel/clang: 17.0.6::gentoo
sys-devel/gcc: 13.2.1_p20240210::gentoo
sys-devel/gcc-config: 2.11::gentoo
sys-devel/lld: 17.0.6::gentoo
sys-devel/llvm: 17.0.6::gentoo
sys-kernel/linux-headers: 6.6-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.39-r6::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
volatile: False
sync-rsync-verify-jobs: 1
sync-rsync-verify-max-age: 3
sync-rsync-extra-opts:
sync-rsync-verify-metamanifest: yes
brave-overlay
location: /var/db/repos/brave-overlay
sync-type: git
sync-uri: https://gitlab.com/jason.oliveira/brave-overlay.git
masters: gentoo
volatile: False
crossdev
location: /var/db/repos/crossdev
masters: gentoo
volatile: False
Binary Repositories:
gentoobinhost
priority: 1
sync-uri: https://distfiles.gentoo.org/releases/amd64/binpackages/23.0/x86-64
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -march=skylake -mabm --param=l1-cache-line-size=64 --param=l1-cache-size=32 --param=l2-cache-size=3072"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -march=skylake -mabm --param=l1-cache-line-size=64 --param=l1-cache-size=32 --param=l2-cache-size=3072"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS="-O2 -pipe -march=skylake -mabm --param=l1-cache-line-size=64 --param=l1-cache-size=32 --param=l2-cache-size=3072"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs binpkg-multi-instance buildpkg-live config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync merge-wait multilib-strict network-sandbox news parallel-fetch pid-sandbox pkgdir-index-trusted preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe -march=skylake -mabm --param=l1-cache-line-size=64 --param=l1-cache-size=32 --param=l2-cache-size=3072"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs"
LEX="flex"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="X a52 aac acl acpi alsa amd64 bluetooth branding bzip2 cairo cdda cdr cet colord crypt cups dbus dri dts dvd dvdr eds elogind encode evo exif flac gdbm gif gnome gnome-keyring gnome-shell gpm gstreamer gtk gui iconv icu introspection ipv6 jpeg keyring kf6compat lcms libnotify libtirpc mad mng mp3 mp4 mpeg multilib nautilus ncurses networkmanager nls ogg opengl openmp pam pango pcre pdf png policykit ppds pulseaudio qt5 readline sdl seccomp sound spell ssl startup-notification svg sysprof test-rust tiff tracker truetype udev udisks unicode upower usb vorbis vulkan wayland wxwidgets x264 xattr xcb xft xml xv xvid zlib" ABI_X86="64" ADA_TARGET="gcc_12" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_anon authn_dbm authn_file authz_dbm authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir env expires ext_filter file_cache filter headers include info log_config logio mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 aes avx avx2 f16c fma3 pclmul popcnt rdrand sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 ntrip navcom oceanserver oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 tsip tripmate tnt ublox" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz glk hd44780 lb216 lcdm001 mtxorb text" LUA_SINGLE_TARGET="lua5-4" LUA_TARGETS="lua5-1 lua5-4" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php8-2" POSTGRES_TARGETS="postgres15" PYTHON_SINGLE_TARGET="python3_12" PYTHON_TARGETS="python3_12" RUBY_TARGETS="ruby31 ruby32" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipp2p iface geoip fuzzy condition tarpit sysrq proto logmark ipmark dhcpmac delude chaos account"
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EMERGE_DEFAULT_OPTS, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LFLAGS, LIBTOOL, LINGUAS, MAKE, MAKEFLAGS, MAKEOPTS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PYTHONPATH, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS
=================================================================
Package Settings
=================================================================
dev-python/setuptools-70.0.0::gentoo was built with the following:
USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 python3_12 -pypy3 -python3_10 -python3_13"
FEATURES="pkgdir-index-trusted sandbox ebuild-locks config-protect-if-modified distlocks fixlafiles news unmerge-orphans assume-digests usersandbox binpkg-dostrip preserve-libs buildpkg-live userfetch binpkg-docompress merge-wait multilib-strict strict unmerge-logs ipc-sandbox usersync binpkg-multi-instance qa-unresolved-soname-deps unknown-features-warn protect-owned userpriv parallel-fetch binpkg-logs network-sandbox pid-sandbox sfperms xattr merge-sync"
|
world file
| Code: |
app-admin/sysklogd
app-containers/docker
app-containers/docker-buildx
app-containers/docker-cli
app-containers/docker-compose
app-editors/sublime-text
app-editors/vscode
app-eselect/eselect-repository
app-office/libreoffice
app-office/lyx
app-portage/gentoolkit
app-shells/bash-completion
app-shells/fzf
dev-embedded/sdcc
dev-lang/go
dev-lang/lua
dev-lang/pcc
dev-lang/tcc
dev-lang/tcl
dev-tcltk/tcllib
dev-util/clion
dev-util/pycharm-community
dev-vcs/git
gnome-base/gnome-light
gnome-extra/gnome-tweaks
gnome-extra/nm-applet
gui-libs/display-manager-init
media-gfx/gimp
media-gfx/imagemagick
media-sound/musescore
net-misc/networkmanager
net-wireless/wpa_supplicant
sys-apps/mlocate
sys-block/io-scheduler-udev-rules
sys-boot/grub
sys-boot/os-prober
sys-devel/clang-common
sys-devel/crossdev
sys-firmware/intel-microcode
sys-fs/dosfstools
sys-fs/xfsprogs
sys-kernel/gentoo-kernel
sys-kernel/installkernel
sys-kernel/linux-firmware
sys-process/cronie
www-client/brave-bin::brave-overlay
www-client/firefox
|
|
|
| Back to top |
|
|
eschwartz
n00b
Joined: 29 Oct 2023
Posts: 39
|
| Posted: Mon Jun 17, 2024 3:09 am Post subject: |
|
|
| dargueta wrote: | I'm having the same problem and while "no wheel name returned" is the last error returned, it's not the root cause. I was having a massive headache trying to do the normal "don't touch anything and it'll work on its own" -- specifically with setuptools breaking -- so I tried doing the "safe upgrade" path. It didn't fix anything.
The problem appears to be setuptools's distutils import path hack is not working. Python 3.12 removed the distutils package from the standard library, so setuptools vendored it and did some fancy import path hacking to redirect `import distutils` to their own vendored version. Because this isn't working, it the import path doesn't get modified, and anything relying on setuptools (which is A LOT of stuff) will not upgrade.
|
That's a very interesting problem, and I couldn't initially reproduce it.
After digging around in the codebase I formed a theory. Can you tell me if you have the environment variable $SETUPTOOLS_USE_DISTUTILS set before running emerge? |
|
| Back to top |
|
|
dargueta
n00b
Joined: 09 Jun 2024
Posts: 3
|
| Posted: Mon Jun 17, 2024 3:38 am Post subject: |
|
|
| I didn't initially. I set it to "stdlib" because I read somewhere that "local" was broken and the default may need to be explcitly set, but it didn't change anything. I've done a bunch of fiddling since then, so I'll try again without it set at all this time and see if that fixes anything. |
|
| Back to top |
|
|
eschwartz
n00b
Joined: 29 Oct 2023
Posts: 39
|
| Posted: Mon Jun 17, 2024 3:44 am Post subject: |
|
|
| dargueta wrote: | | I didn't initially. I set it to "stdlib" because I read somewhere that "local" was broken and the default may need to be explcitly set, but it didn't change anything. I've done a bunch of fiddling since then, so I'll try again without it set at all this time and see if that fixes anything. |
It ("local") has some definite downsides depending on the situation. It's also the ONLY option for python 3.12, which means setting to stdlib instead will simply break setuptools entirely.
I suggest only setting it when you need to, and porting code that uses it off of distutils and over to e.g. dev-build/meson instead. Avoid setting it for portage. |
|
| Back to top |
|
|
dargueta
n00b
Joined: 09 Jun 2024
Posts: 3
|
| Posted: Mon Jun 17, 2024 3:54 am Post subject: |
|
|
| Yeah, I only did it because somewhere on a Github issue thread it said "if you see this error try overriding that environment variable" and after a week of tearing my beard out I was like "eh... #yolo" |
|
| Back to top |
|
|
gcyoung
Apprentice
Joined: 04 Jul 2007
Posts: 174
Location: England
|
| Posted: Mon Jun 17, 2024 9:39 pm Post subject: |
|
|
I didn't put any 'pqv' result up with the 'info' I posted earlier since it was 'history' by the time it was asked for, as I had
later made many more attempts at a satisfactory merge and it would not have been available: -- I had saved the info data.
I dont know whether it will be useful, but in case it might be I am quoting the following 'pqv' text which was aquired after
a failed 'emerge -1UD @world': | Quote: | | ebuild R ] app-arch/brotli-1.1.0 USE="python -debug -test" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python3_11* python3_12 -python3_10" |
It is pretty brief, but then, the failure happened very quickly with the usual error message. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
