View previous topic :: View next topic |
Author |
Message |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Wed Aug 07, 2024 7:53 pm Post subject: Are SSD drives suitable for RAID-1 use these days? |
|
|
On my Gentoo main system, I have four 2TB mechanical hard drives configured into two RAID-1 mirrors. I then add the physical drive partitions to Logical Volume manager, which I can use to create partitions as and when needed, as well as change partition sizes easily.
This configuration has served me well over many years. Copied from common practice where I worked - provides good resilience to single point failure in the storage systems.
The time to consider replacements is coming around again, and SSD drives have caught my eye. Last time I looked, the price premium for 2TB SSD was too high, now it is in the region of price parity with 2TB mechanical drives.
But - I recall that I also formed an opinion (some years ago) that SSD drives would not work well with a Gentoo system configured like mine, on account of the SSD drives having a very limited lifespan if written to regularly.
How do people view this these days? Have the manufacturers mitigated the problem with high write rates to SSD drives?
As an off the wall follow up question - what would people think of a SSD-Mechanical pairing in a RAID-0 mirror? Stupid idea, or some merit for faster read times?
Thanks in advance for any insights.
(Not sure this is the correct forum for this sort of discussion - hopefully the mods will move the post if not)
(Edit: RAID-0 to RAID-1, correcting a senior moment, sorry)
Last edited by ipic on Fri Aug 09, 2024 11:41 am; edited 1 time in total |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
szatox Advocate
![Advocate Advocate](/images/ranks/rank-G-1-advocate.gif)
Joined: 27 Aug 2013 Posts: 3330
|
Posted: Wed Aug 07, 2024 8:53 pm Post subject: |
|
|
Quote: | But - I recall that I also formed an opinion (some years ago) that SSD drives would not work well with a Gentoo system configured like mine, on account of the SSD drives having a very limited lifespan if written to regularly. |
Dunno, my Gentoo is doing fine. The vast majority of compilation happens in RAM anyway, and hitting swap once in a while is not a big deal.
Quote: | As an off the wall follow up question - what would people think of a SSD-Mechanical pairing in a RAID-0 mirror? Stupid idea, or some merit for faster read times? | It should give you faster reads, but write performance will be limited by hdd.
Depending on the internal optimizations, I can imagine this setup failing slow HDD out of the raid set during a big write (or at any time really), so you'd have to really really stress test it.
Bcache and similar probably won't survive the backing device failing, even if cache is big enough to keep all data forever.
Maybe you could abuse DRBD in some creative way to flag HDD as write-mostly, if you're -brave-enough- totally insane. I mean, this idea definitely sucks, but I am now curious if it's possible
One thing that did actually work well when mixing HDD and SSD was LVM snapshots. Full snapshots on a single HDD degrade performance like 10 times. LVM allows you to specify physical volume where a logical volume should be created. Having both, HDD and SSD in one group allows you to put an LV on HDD and then snapshot is to SSD, which avoids write amplification penalty. _________________ Make Computing Fun Again |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 8:43 am Post subject: |
|
|
szatox wrote: | Quote: | But - I recall that I also formed an opinion (some years ago) that SSD drives would not work well with a Gentoo system configured like mine, on account of the SSD drives having a very limited lifespan if written to regularly. |
Dunno, my Gentoo is doing fine. The vast majority of compilation happens in RAM anyway, and hitting swap once in a while is not a big deal. |
Sound promising. Do you use the SSD's in a RAID?
I'd be interested to know which manufacturers you have found to be reliable.
Thanks |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 8:57 am Post subject: |
|
|
szatox wrote: |
Quote: | As an off the wall follow up question - what would people think of a SSD-Mechanical pairing in a RAID-0 mirror? Stupid idea, or some merit for faster read times? | It should give you faster reads, but write performance will be limited by hdd.
Depending on the internal optimizations, I can imagine this setup failing slow HDD out of the raid set during a big write (or at any time really), so you'd have to really really stress test it.
Bcache and similar probably won't survive the backing device failing, even if cache is big enough to keep all data forever.
Maybe you could abuse DRBD in some creative way to flag HDD as write-mostly, if you're -brave-enough- totally insane. I mean, this idea definitely sucks, but I am now curious if it's possible
One thing that did actually work well when mixing HDD and SSD was LVM snapshots. Full snapshots on a single HDD degrade performance like 10 times. LVM allows you to specify physical volume where a logical volume should be created. Having both, HDD and SSD in one group allows you to put an LV on HDD and then snapshot is to SSD, which avoids write amplification penalty. |
My main reason for thinking of this stupid setup is the way I replace drives in the RAID-0. Process is:
- remove the drive to be replaced from the RAID array.
- format the new drive by copying the partition tables Code: | sgdisk /dev/sdX -R /dev/sdY
sgdisk -G /dev/sdY |
- Join the new disk to the array, and let MDADM recovery do it's thing.
Your comment about the HDD being dropped because of slow writes *looks* like it will be OK in this, one, specific, scenario - but I guess it could fail immediately afterwards, before I have a chance to reverse the process? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
lars_the_bear Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 05 Jun 2024 Posts: 365
|
Posted: Fri Aug 09, 2024 9:01 am Post subject: Re: Are SSD drives suitable for RAID-0 use these days? |
|
|
ipic wrote: |
How do people view this these days? Have the manufacturers mitigated the problem with high write rates to SSD drives?
|
My understanding is that writes are less a problem these days, with wear levelling and so-forth. Seagate claims a total write life of 1200 terrabytes for their 'Barracuda' SSD range. I don't if that's been independently verified but, even if it's a hundred times smaller in practice, it's still long enough for my purposes. Even if it's only 12 Tb, that's still 6Gb per day, every day, for five years.
These days, I think I would be quite happy to use decent-quality SSDs in RAID, in the same circumstances where I would use them singly. But the sizes I want are still not really affordable in SSD.
BR, Lars. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
szatox Advocate
![Advocate Advocate](/images/ranks/rank-G-1-advocate.gif)
Joined: 27 Aug 2013 Posts: 3330
|
Posted: Fri Aug 09, 2024 10:09 am Post subject: |
|
|
Quote: | I have four 2TB mechanical hard drives configured into two RAID-0 mirrors | Oh, before we continue... You meant RAID1, didn't you?
RAID0 is striping without any redundancy
Quote: | Sound promising. Do you use the SSD's in a RAID? | I used to have a bunch of Debian servers with SSDs in RAID1 in my care, including a pretty big and damn busy integration database. It worked.
I don't know what SSDs was it stuffed with. You should be good with anything built to be installed inside the case (as a hot storage). Removable devices (cold storage, like memory cards and pendrives) are manufactured for low duty and will burn holes like crazy.
My personal Gentoo is just sitting on a single nvme. After a few years of daily use, it reports 2% wear with 0 cells burnt out. Looks like it's going tol last me a lifetime.
Quote: | Your comment about the HDD being dropped because of slow writes *looks* like it will be OK in this, one, specific, scenario - but I guess it could fail immediately afterwards, before I have a chance to reverse the process? | I don't know how it's going to behave.
Depends on how defensively it's coded, you may be fine, or adding the new, fast device might kick out the device with data on it from raid, leaving you in an unusable state.
Honestly I'd rather take that machine down and copy data manually with dd instead. 2 TB is not _that_ much, standard 7200RPM disks should let you image copy them within 2-3 hours. _________________ Make Computing Fun Again |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 11:44 am Post subject: |
|
|
szatox wrote: | Quote: | I have four 2TB mechanical hard drives configured into two RAID-0 mirrors | Oh, before we continue... You meant RAID1, didn't you?
RAID0 is striping without any redundancy |
Yeah, senior moment, sorry. I've edited the heading and original post. RAID-1 mirrors. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 12:02 pm Post subject: |
|
|
szatox wrote: | Quote: | Your comment about the HDD being dropped because of slow writes *looks* like it will be OK in this, one, specific, scenario - but I guess it could fail immediately afterwards, before I have a chance to reverse the process? | I don't know how it's going to behave.
Depends on how defensively it's coded, you may be fine, or adding the new, fast device might kick out the device with data on it from raid, leaving you in an unusable state.
Honestly I'd rather take that machine down and copy data manually with dd instead. 2 TB is not _that_ much, standard 7200RPM disks should let you image copy them within 2-3 hours. |
Thanks for the feedback, it's very useful. Good to know your RAID's work with SSD's.
I've gone back to my motherboard manual, and I have 6x SATA-6 connectors to play with, and a free 5.25inch drive bay. With adapter trays I can fit 2 SSD drives into the 5.25 bay.
So, a plan is:
- Boot with rescue image
- DD a HDD to one of the SDDs
- make new mirror with other SDD
- shutdown
- remove HDDs and replace with SDDs (to use original drive designations)
- reboot with SDD's now as original mirror
- pray, then test
If it all goes spectacularly wrong, I still have the original HDDs to go back to.
Another thought - would using different drive manufacturers for the two mirror SDDs be a way to spread risk a bit? I looked after a system at work a while back which had identical components in two redundant nodes - and they both failed at exactly the same time, due to the identical manufacturer error. So, burnt into my memory. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 12:09 pm Post subject: Re: Are SSD drives suitable for RAID-0 use these days? |
|
|
lars_the_bear wrote: | ipic wrote: |
How do people view this these days? Have the manufacturers mitigated the problem with high write rates to SSD drives?
|
My understanding is that writes are less a problem these days, with wear levelling and so-forth. Seagate claims a total write life of 1200 terrabytes for their 'Barracuda' SSD range. I don't if that's been independently verified but, even if it's a hundred times smaller in practice, it's still long enough for my purposes. Even if it's only 12 Tb, that's still 6Gb per day, every day, for five years.
These days, I think I would be quite happy to use decent-quality SSDs in RAID, in the same circumstances where I would use them singly. But the sizes I want are still not really affordable in SSD.
BR, Lars. |
Thanks for the feedback, appreciated.
As you say, even a whole order of magnitude lower would still make the drives good for probably the rest of my lifetime .
I'll assume that the mean time to failure for other reasons (manufacturing process error etc) would be as good as or probably better than mechanical - since assembling very small moving parts carries its own risks. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
lars_the_bear Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 05 Jun 2024 Posts: 365
|
Posted: Fri Aug 09, 2024 12:45 pm Post subject: Re: Are SSD drives suitable for RAID-0 use these days? |
|
|
ipic wrote: |
I'll assume that the mean time to failure for other reasons (manufacturing process error etc) would be as good as or probably better than mechanical - since assembling very small moving parts carries its own risks. |
Seagate claims MTBF of 1.8 million hours, which is about 200 years. So, again, even if you're at the worst end of the practical range, the lifetime is still likely to be tens of years.
Having said that, I've not seen any independent verification of these claims. To be frank, I'm not sure how they can easily be tested. You'd need to run thousands of drives side-by-side for several years to stand a reasonable probability of seeing a failure. In my working life I've seen mechanical drives fail, even when treated well. I suspect that the bearings just run dry eventually. But I've never seen a Seagate SSD fail, even after installing dozens of them over 10+ years. Even the cheap, unbranded ones don't usually fail -- they're usually defective when they arrive.
I don't think there's anything special about Seagate -- it's just that they actually publish service lifetime stuff, and I'm not sure manufacturers usually do.
BR, Lars. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
szatox Advocate
![Advocate Advocate](/images/ranks/rank-G-1-advocate.gif)
Joined: 27 Aug 2013 Posts: 3330
|
Posted: Fri Aug 09, 2024 1:18 pm Post subject: |
|
|
Quote: | So, a plan is:
- Boot with rescue image
- DD a HDD to one of the SDDs
- make new mirror with other SDD
- shutdown
- remove HDDs and replace with SDDs (to use original drive designations)
- reboot with SDD's now as original mirror
- pray, then test | I think you're overcomplicating things.
You can clone both HDDs to respective SSDs at the same time and avoid resyncing RAID afterwards. Just make sure to remove old disks before you activate raid, mdraid identifies members by their superblocks.
If new and old devices are exactly the same size, you can even clone them whole, including partition tables. With slightly bigger drives and GPT partitions, you'll need to repair the backup partition table afterwards, but it doesn't affect superblocks, so your raid will still assemble just fine; Only smaller devices would require more care.
Quote: | Another thought - would using different drive manufacturers for the two mirror SDDs be a way to spread risk a bit? | Yes.
Companies like buying stuff in bulk, so they put disks with consecutive serial numbers in the raid because that's what they have at hand. In theory it is also good for performance, but in practice comes with increased risk of common cause failures. Your story is not surprising. _________________ Make Computing Fun Again |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pa4wdh l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
Joined: 16 Dec 2005 Posts: 868
|
Posted: Fri Aug 09, 2024 5:26 pm Post subject: |
|
|
I have a very similar setup to yours in my server. It used to be 2 mechanical drives, but i've replaced them with SSD's by replacing them one at a time and let RAID to it's magic.
As for writes, i do monitor them but the drives capability is so high i'll never reach it's theoretical maximum. What i did do is to replace one SSD with a different model after a few years of use. My RAID array now consists of two different drives with an age difference of 4 years, the chance of them failing at the same time should be quite low.
I made a simple script to calculate the amount of written data per day and estimate how long it will take until you reach the specified TBW for the drive. This is the script:
Code: | #!/bin/sh
DEVICE[0]="/dev/sda"
START[0]="2019-08-10"
TBW[0]="600"
DEVICE[1]="/dev/sdb"
START[1]="2023-09-02"
TBW[1]="600"
human_size()
{
local INPUT=$1
local SUFFIX="B"
local FACTOR="1000"
local LIMIT=$(($FACTOR*20))
if [ "$INPUT" -gt "$LIMIT" ]
then
INPUT=$((INPUT/$FACTOR))
SUFFIX="KB"
fi
if [ "$INPUT" -gt "$LIMIT" ]
then
INPUT=$((INPUT/$FACTOR))
SUFFIX="MB"
fi
if [ "$INPUT" -gt "$LIMIT" ]
then
INPUT=$((INPUT/$FACTOR))
SUFFIX="GB"
fi
if [ "$INPUT" -gt "$LIMIT" ]
then
INPUT=$((INPUT/$FACTOR))
SUFFIX="TB"
fi
echo "$INPUT $SUFFIX"
}
for COUNT in ${!DEVICE[@]}
do
# Get sectors written from device
SECTORS=`smartctl -A ${DEVICE[$COUNT]} | grep "^241 " | awk '{ print $NF }'`
if [ -z "$SECTORS" ]
then
echo "${DEVICE[$COUNT]}: No write statistics available"
continue
fi
# Writes are reported by sectors, multiply by 512
BW=$((SECTORS*512))
# Guaranteerd value is TBW so multiply by 1 TB
ESTBW=$((${TBW[$COUNT]}*1000000000000))
# Calculate the days the device has been in use
STARTUNIX=`date +'%s' -d "${START[$COUNT]}"`
NOWUNIX=`date +'%s'`
DAYS=$((($NOWUNIX-$STARTUNIX)/86400))
if [ "$DAYS" -lt "1" ]
then
DAYS=1
fi
# Calculate the daily write-rate
DAYRATE=$(($BW/$DAYS))
# Calculate the number of days left given the current rate
ESTDAYS=$((($ESTBW/$DAYRATE)-$DAYS))
ESTDATE=`date +"%d-%m-%Y" -d "$ESTDAYS days"`
# Report
echo "${DEVICE[$COUNT]}: Written `human_size $BW` in $DAYS days, `human_size $DAYRATE`/day, $ESTDAYS days left: $ESTDATE"
done
|
The arrays at the start are the place to specify the drive's device node, the date you started using it, and the TBW specified by the manufacturer. On my system this reports:
Code: | /dev/sda: Written 6324 GB in 1826 days, 3463 MB/day, 171406 days left: 24-11-2493
/dev/sdb: Written 1400 GB in 342 days, 4096 MB/day, 146134 days left: 15-09-2424
|
So at least in theory i don't have to worry about them
To select the right drives i followed this advice: https://raid.wiki.kernel.org/index.php/Choosing_your_hardware,_and_what_is_a_device%3F#TLER_and_SCT.2FERC
So far i've seen Samsung drives consistently supporting SCT/ERC in it's EVO series so my drives are an EVO 860 and an EVO 870.
Be aware that this feature needs activation, this is in my /etc/local.d:
Code: | #!/bin/sh
# Set SCT Error Recovery Control to 7 seconds
smartctl -l scterc,70,70 /dev/sda
smartctl -l scterc,70,70 /dev/sdb
|
_________________ The gentoo way of bringing peace to the world:
USE="-war" emerge --newuse @world
My shared code repository: https://code.pa4wdh.nl.eu.org
Music, Free as in Freedom: https://www.jamendo.com
Last edited by pa4wdh on Sat Aug 10, 2024 6:31 am; edited 3 times in total |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Fri Aug 09, 2024 6:26 pm Post subject: |
|
|
pa4wdh wrote: | I have a very similar setup to yours in my server. It used to be 2 mechanical drives, but i've replaced them with SSD's by replacing them one at a time and let RAID to it's magic. |
Many thanks for the super useful post. I have now pulled the trigger and have started ordering hardware.
Re your comment: "replacing them one at a time and let RAID to it's magic"
Was there a time when you were using a RAID array with a HDD and a SDD active at the same time?
Or was that just for the time while you converted the drives from HDD to SDD? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pa4wdh l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
Joined: 16 Dec 2005 Posts: 868
|
Posted: Sat Aug 10, 2024 6:26 am Post subject: |
|
|
Quote: | Was there a time when you were using a RAID array with a HDD and a SDD active at the same time?
Or was that just for the time while you converted the drives from HDD to SDD?
|
For about a week i've been running with 1 HDD and 1 SSD. The difference in speed was huge (1TB 2.5" 5400rpm disk vs. EVO 860), but that didn't affect the array, just don't expect a performance increase during that time. _________________ The gentoo way of bringing peace to the world:
USE="-war" emerge --newuse @world
My shared code repository: https://code.pa4wdh.nl.eu.org
Music, Free as in Freedom: https://www.jamendo.com |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
lars_the_bear Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 05 Jun 2024 Posts: 365
|
Posted: Sat Aug 10, 2024 6:26 pm Post subject: |
|
|
This isn't an issue for everybody, I guess: a huge advantage for me, if I could afford SSDs as large as I need, would be that they are silent in operation. Right now, with my stack of 7200rpm magnetic disks, I have to choose between having a constant drone from them, or letting them spin up and spin down all the time.
Actually, my wife makes that choice for me
Personally, I would use SSDs if I could, even if it meant that individual drives won't last as long as the magnetic drives I currently use. But, as I said, I suspect they will.
As soon as the price of SSDs falls to about a quarter their current level, I'll be using them in my RAID for sure.
BR, Lars. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
ipic Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
![](images/avatars/gallery/TV Stars/tealc1.jpg)
Joined: 29 Dec 2003 Posts: 397 Location: UK
|
Posted: Wed Aug 21, 2024 1:34 pm Post subject: |
|
|
Having taken delivery of a pair of 4TB SSD drives, I decided to try out the 'hot' replacement route.
Physically add the two new drives to the case
Use mdadm --grow to increase the RAID size to 4
Add each new SDD in turn, and wait for resync to finish
Use mdadm --fail and then --remove to remove the 'old' HDD drives
Use mdadm --grow to return RAID size to 2
Make sure that grub is installed on new SSDs and EFI partitions and boot entries are good
Shut down PC and physically remove 'old' HDD drives, move new SDD drives the bays and connectors the HDDs used
Start PC
Boot up went fine - Raids were assembled correctly, LVMs found and mounted - everything as before.
Very please with everything loading faster now
If I remember, I'll come back here from time to time with reliability reports. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|