| View previous topic :: View next topic |
| Author |
Message |
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
 Posted: Sun Nov 17, 2024 10:29 am Post subject: Kernel doesn't load on Lenovo X1 Carbon 12th Gen (no output) |
 |
|
I have a Lenovo X1 Carbon 12th Gen and the Linux kernel directly crashes immediately after loading. I probably missed some important kernel config, but I don't have any clue which one.
Configuration
Boot manager: refind (refind does load)
Kernel: 6.11.8 with EFI stub support
Partition layout: nvme0n1p1 (EFI System), ..., nvme01p4 (Linux Swap), nvme01p5 (Linux Root), nvme01p6 (Linux Home)
Output on console after invoking Gentoo from refind
| Code: | Starting vmlinuz-6.11.8-gentoo.efi
Using load options 'udev.log_priority=5 emergency initrd=\EFI\Gentoo\initramfs-6.11.8.img'
EFI stub: Loaded initrd from command line option |
After that: nothing (no disk activity, no flashing keyboard lights, nada, ...)
he kernel does not use any modules, everything is built-in statically. The initramfs does not contain anything critical but only contains the firmware for the Bluetooth adapter, wifi adapter and intel microcode. Some (not all) potentially relevant kernel settings | Code: | CONFIG_FB=y
CONFIG_FB_EFI=y
CONFIG_FB_SIMPLE=y
CONFIG_DRM=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_I915=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_HWMON=y |
Link to complete kernel config: https://pastebin.com/L7XDLUVf
Note, the recent Gentoo Minimal Install Image does actually boot in UEFI mode, so it is probably something wrong with my kernel. What am I missing?[/bug] |
|
| Back to top |
|
 |
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Sun Nov 17, 2024 11:02 am Post subject: |
|
|
I can see from your kernel configuration that you have some experience with it. Everything is configured for the console and also for accessing the hard disk. But it could be that you have a special PCI controller. Boot again with the MinimalCD and do a “lspci -nnk” and check if you need the kernel module “vmd” (which is very often used in Intel machines). If so, this is exactly what is missing (# CONFIG_VMD is not set). (See also: https://wiki.gentoo.org/wiki/User:Pietinger/Experimental/Manual_Configuring_Current_Kernel#Accessing_the_Root_Partition )
Also missing:
| Code: | # CONFIG_FB_EFI is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_X86_INTEL_LPSS is not set |
without this module these module (you have already enabled) will never work:
| Code: | CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_PCI=y |
Maybe you need also (depends on your machine):
| Code: | | # CONFIG_EFI_HANDOVER_PROTOCOL is not set |
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
| Posted: Sun Nov 17, 2024 11:13 am Post subject: |
|
|
| I assume I do not need the kernel module "vmd". lspci from the installation media does not list it. Here ist the pastebin for lspci: https://pastebin.com/Y0JuUngQ |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Sun Nov 17, 2024 11:23 am Post subject: |
|
|
Uii ... a brand new MeteorLake ... please check with "dmesg | grep firmware" - after booting with our LIVECD (not the minimalCD; because of graphics driver) - needed firmware files, and put it into CONFIG_EXTRA_FIRMWARE. Does this help (together with my already mentioned changes)?
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
|
| Back to top |
|
|
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
| Posted: Sun Nov 17, 2024 11:44 am Post subject: |
|
|
I enabled CONFIG_VMD and CONFIG_EFI_HANDOVER_PROTOCOL to give it a try. No luck with that. (But I did expect that.)
I will try the Live Image. I am downloading ... However, please note that the Minimal Installation CD is able to boot and uses i915. So I doubt it is a firmware problem, but I will try anyway.
The minimal installation CD loaded the following FW files:- regulatory.db
- regulatory.db.p7s
- iwlwifi-ma-b0-gf-a0-83.ucode
- iwlwifi-ma-b0-gf-a0.pnvm
- iwl-debug-yoyo.bin
- intel/ibt-0180-0041.sfi
- intel/ibt-0180-0041.ddc
- intel/sof-ipc4/mtl/sof-mtl.ri
I already have put those FW into my initramfs except for iwl-debug-yoyo.bin, because I wasn't able to find out which Gentoo Package provides that one. Note that the minimal installation CD is able to use FB on i915 without any graphics FW. Hence, I expect the Live Image to show nothing else. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Sun Nov 17, 2024 12:08 pm Post subject: |
|
|
| nagmat84 wrote: | | [...] Note that the minimal installation CD is able to use FB on i915 without any graphics FW. Hence, I expect the Live Image to show nothing else. |
Yes ... but you have enabled your i915 statically into the kernel (and then you need the firmware files also already in your kernel; your initramfs would be too late). The LiveCD has i915 as module and therefore can load the firmware files from /lib/firmware (because all modules which are NOT statically configured will be loaded/initialized AFTER the kernel has access to the root partition).
P.S.: The module CONFIG_X86_INTEL_LPSS is most important (because it initializes some chipsets).
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
| Posted: Sun Nov 17, 2024 1:43 pm Post subject: |
|
|
I tried to other things, both without success:
I compiled my kernel with i915 as a module in case this would have been the culprit and loaded too early. There is no difference, the kernel hangs directly on or after loading the initramfs.
I booted from the Live CD. The module intel_vpu of Live CD tried to load some additional firmware "vpu_37xx.bin, "mtl_vpu.bin" and "intel/vpu/vpu_37xx_v0.0.bin". However this failed as the FW was not available. But this does not seem to be related to graphics. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Sun Nov 17, 2024 4:24 pm Post subject: |
|
|
| nagmat84 wrote: | | [...] There is no difference, the kernel hangs directly on or after loading the initramfs. |
Hmmm ... problem is I have no experience with refind ... and maybe we must check the init-script of the initramfs ...
| nagmat84 wrote: | | I booted from the Live CD. The module intel_vpu [...] But this does not seem to be related to graphics. |
Yes, it is not related to graphics. VPU is the (old) modul name of Intels NPU (this is a CPU-integrated inference accelerator) ->
| Code: | Device Drivers --->
[*] Compute Acceleration Framework --->
<*> Intel NPU (Neural Processing Unit) |
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
| Posted: Sun Nov 17, 2024 4:54 pm Post subject: |
|
|
| pietinger wrote: |
Hmmm ... problem is I have no experience with refind ... and maybe we must check the init-script of the initramfs ...
|
I don't believe that the problem is related to refind. The problem remains the same when I try to boot the EFI stub directly from firmware. I have used refind several times now and never had those kinds of problems.
I installed a distribution kernel and can boot that one from refind with a bit more (but not full) success:- iwlwifi returns the error: "0000:00:14.3: Not valid error log pointer 0x002798A8 for RT uCode"
- A kernel bug with: "BUG kernel NULL pointer dereference; #PF: supervisor write access in kernel mode; #PF: error_code(0x0002) - not-present page". Immediately above those lines is a warning from "skl_hda_dsp_generic" which says "ASoC: Parent card not yet available, widget card binding deferred". However, I do not know if the kernel bug is related to that preceding line or if they are unrelated
- Immediately after that, there is an OOPS from udev-worker with "RIP: 0010:sof_ipc4_update_cpc_from_manifest+0x13a/0x5160 [snd_sof]
- Finally, SDDM (my display manager) does not start with the error "no display found"
But at least I am able to get a console.
| pietinger wrote: |
Yes, it is not related to graphics. VPU is the (old) modul name of Intels NPU (this is a CPU-integrated inference accelerator) ->
| Code: | Device Drivers --->
[*] Compute Acceleration Framework --->
<*> Intel NPU (Neural Processing Unit) |
|
Fine, but the dmesg output still attribute it to the DRM (direct rendering manager). Is it possible that the failure to load the VPU firmware also prevents the graphics card from functioning? |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Sun Nov 17, 2024 10:23 pm Post subject: |
|
|
| nagmat84 wrote: | | [...] Is it possible that the failure to load the VPU firmware also prevents the graphics card from functioning? |
AFAIK: No. I know some settings without any VPU (NPU) module.
But if you have now a console we can now inspect more. I would like to see your current kernel .config and the complete output of "dmesg" and I would like to ask how you have created your kernel .config? (make oldconfig for a prevoius one, or completely new ... or edited an old one?)
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
nagmat84
Apprentice
Joined: 27 Mar 2007
Posts: 268
|
| Posted: Sun Nov 17, 2024 10:59 pm Post subject: |
|
|
This is not a direct answer to the previous post, because I was busy trying different things, but I made some progress.- gentoo-sources-6.11.8 with my custom configuration does not boot at all. This is variant which this post has been about originally and whose config is in the pastebin above.
- gentoo-kernel-6.6.58 (stable) with the configuration that is shipped with the ebuild produces the kernel null pointer error and the Oops which I wrote about in my previous posting. I don't get a graphical login, because sddm cannot find a usable display, but at least I get a console.
- genoo-kernel-6.11.8 (testing) with the configuration that is shipped with the ebuild simply works. There are no errors in dmesg, no firmware problems and I get a graphical output.
Note: Refind invokes all three kernel in the exact same way and all three kernels use initramfs which include the exact same set of files I assume that proofs that the problem actually lies within the kernel and is not a problem due to refind or some missing firmware files.
I guess one can assume that 6.6.58 might just be too old for my hardware. The null pointer exception within the kernel indicates a kernel bug. So let's forget that kernel version. I only accidentally emerged that, because I forgot to unmask ~amd64 for gentoo-kernel.
So the interesting question is what is the crucial difference between gentoo-sources-6.11.8 with my custom configuration and gentoo-kernel-6.11.8 with the distribution-provided configuration that makes the first one unbootable and the latter one working smoothly?
| Quote: | | I would like to see your current kernel .config and the complete output of "dmesg" and I would like to ask how you have created your kernel .config? |
My custom kernel config for gentoo-sources-6.11.8 which does not work is in the pastebin. The working config for gentoo-kernel-6.11.8 is the distribution provided configuration.
I have been using an older generation of the same Laptop model, i.e. Lenovo X1 Carbon 3rd gen which has already been running kernel 6.11.8. I took that configuration as a starting point for my new Laptop Lenovo X1 Carbon 12th gen, enabled the options for the new devices (USB4/Thunderbolt, NVMe, PCIE, different sound card, different Bluetooth adapter, touch input, ...) and disabled the options for the non-existing devices (i.e. different camera model, etc.)
I took the kernel config of my previous laptop as a starting point, because it was already tuned for an Intel-only, low-power system. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5118
Location: Bavaria
|
| Posted: Mon Nov 18, 2024 1:37 am Post subject: |
|
|
| nagmat84 wrote: | This is not a direct answer to the previous post, because I was busy trying different things, but I made some progress.- gentoo-sources-6.11.8 with my custom configuration does not boot at all. This is variant which this post has been about originally and whose config is in the pastebin above.
- gentoo-kernel-6.6.58 (stable) with the configuration that is shipped with the ebuild produces the kernel null pointer error and the Oops which I wrote about in my previous posting. I don't get a graphical login, because sddm cannot find a usable display, but at least I get a console.
- genoo-kernel-6.11.8 (testing) with the configuration that is shipped with the ebuild simply works. There are no errors in dmesg, no firmware problems and I get a graphical output.
[...]
So the interesting question is what is the crucial difference between gentoo-sources-6.11.8 with my custom configuration and gentoo-kernel-6.11.8 with the distribution-provided configuration that makes the first one unbootable and the latter one working smoothly? |
I see these main differences:
1. Our gentoo dist-kernel has not this command line parameters:
| Code: | | CONFIG_CMDLINE="rd.vconsole.font=eurlatgr rd.vconsole.keymap=de-latin1 rd.locale.LANG=de_DE.UTF-8 init=/lib/systemd/systemd random.trust_cpu=on" |
(perhaps irrelevant)
2. Not these:
| Code: | # CONFIG_X86_X2APIC is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_NR_CPUS=16 |
(perhaps irrelevant)
3. And our gentoo dist-kernel supports every file compression of the initramfs, while you have only:
| Code: | CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y |
... so, are you sure your (used) initramfs is compressed with LZ4 (and not gzip) ?
BTW: I would disable CONFIG_SYSFB_SIMPLEFB=y and enable: # CONFIG_I2C_HID_ACPI is not set
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
|
Kernel & Hardware
