| View previous topic :: View next topic |
| Author |
Message |
ipic
Guru
Joined: 29 Dec 2003
Posts: 451
Location: UK
|
 Posted: Wed Mar 12, 2025 6:12 pm Post subject: PCIe SATA card (1b21:0612): connected devices not available |
 |
|
I'm having a go at adding more SATA ports to my system.
I got this card . It is a six sata port card.
Although the card and the attached devices are "recognised", they do not show up as usable scsi devices.
If I was to guess, I would say that the card is acting as a multiplexer for several SATA devices, but the kernel doesn't 'understand' that. Possibly because I don't have something configured correctly.
If someone has experience with cards like these I'd appreciate some pointers, thanks.
-------
Details:
Motherboard is: ROG STRIX B550-F GAMING WIFI II
When I plugged the card in, I attached one of my spare SSD drives and a CD/DVR device.
On boot up, I could see both the spare drive and the CDR/DVD player showing up in the bios display. So far so good.
Boot into Gentoo, kernel 6.13.6, and the card shows up as follows:
| Code: |
lspci -nn
...
06:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller [1b21:0612] (rev 01)
...
lspci -k
...
06:00.0 SATA controller: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller (rev 01)
Subsystem: ASMedia Technology Inc. Device 1060
Kernel driver in use: ahci
...
lspci -v
...
06:00.0 SATA controller: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. Device 1060
Flags: bus master, fast devsel, latency 0, IRQ 46, IOMMU group 15
I/O ports at d050 [size=8]
I/O ports at d040 [size=4]
I/O ports at d030 [size=8]
I/O ports at d020 [size=4]
I/O ports at d000 [size=32]
Memory at fc610000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at fc600000 [disabled] [size=64K]
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, IntMsgNum 0
Capabilities: [100] Virtual Channel
Kernel driver in use: ahci
...
|
In dmesg I can see the two devices being found:
| Code: |
## The CD/DVR drive
dmesg | grep ata8.03
[ 5.296404] ata8.03: hard resetting link
[ 5.759574] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 6.090109] ata8.03: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 6.091674] ata8.03: configured for UDMA/133
[ 10.712496] ata8.03: hard resetting link
[ 11.184018] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 11.515894] ata8.03: configured for UDMA/133
[ 16.088445] ata8.03: hard resetting link
[ 16.559954] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 16.891977] ata8.03: configured for UDMA/133
[ 21.472446] ata8.03: hard resetting link
[ 21.943910] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 22.276368] ata8.03: configured for UDMA/133
[ 26.848444] ata8.03: hard resetting link
[ 27.319960] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 27.652886] ata8.03: configured for UDMA/133
[ 30.657389] ata8.03: Check power mode failed (err_mask=0x40)
## The SSD drive:
dmesg | grep ata8.02
[ 4.830897] ata8.02: hard resetting link
[ 5.295565] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 6.075065] ata8.02: Model 'Samsung SSD 870 EVO 2TB', rev 'SVT03B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati
[ 6.076380] ata8.02: supports DRM functions and may not be fully accessible
[ 6.076676] ata8.02: ATA-11: Samsung SSD 870 EVO 2TB, SVT03B6Q, max UDMA/133
[ 6.077767] ata8.02: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 6.082353] ata8.02: Features: Trust Dev-Sleep NCQ-sndrcv
[ 6.083628] ata8.02: supports DRM functions and may not be fully accessible
[ 6.088628] ata8.02: configured for UDMA/133
[ 10.241011] ata8.02: hard resetting link
[ 10.711964] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 11.500869] ata8.02: supports DRM functions and may not be fully accessible
[ 11.507113] ata8.02: supports DRM functions and may not be fully accessible
[ 11.512532] ata8.02: configured for UDMA/133
[ 15.616952] ata8.02: hard resetting link
[ 16.087903] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 16.877893] ata8.02: supports DRM functions and may not be fully accessible
[ 16.883297] ata8.02: supports DRM functions and may not be fully accessible
[ 16.888706] ata8.02: configured for UDMA/133
[ 21.001458] ata8.02: hard resetting link
[ 21.471945] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 22.261038] ata8.02: supports DRM functions and may not be fully accessible
[ 22.267254] ata8.02: supports DRM functions and may not be fully accessible
[ 22.272632] ata8.02: configured for UDMA/133
[ 26.376726] ata8.02: hard resetting link
[ 26.847967] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 27.637572] ata8.02: supports DRM functions and may not be fully accessible
[ 27.643509] ata8.02: supports DRM functions and may not be fully accessible
[ 27.649378] ata8.02: configured for UDMA/133
[ 30.657139] ata8.02: Check power mode failed (err_mask=0x40)
|
But, no scsi devices are created for the attached devices.
| Code: |
lsscsi
[0:0:0:0] disk ATA FIKWOT FS810 4TB 30A8 /dev/sda
[1:0:0:0] disk ATA CT4000MX500SSD1 046 /dev/sdb
[2:0:0:0] disk ATA CT2000MX500SSD1 046 /dev/sdc
[3:0:0:0] disk ATA CT2000MX500SSD1 046 /dev/sdd
[8:0:0:0] disk Generic- SD/MMC 1.00 /dev/sde
[8:0:0:1] disk Generic- Compact Flash 1.01 /dev/sdf
[8:0:0:2] disk Generic- SM/xD-Picture 1.02 /dev/sdg
[8:0:0:3] disk Generic- MS/MS-Pro 1.03 /dev/sdh
[N:0:8224:1] disk WD_BLACK SN850X 4000GB__1 /dev/nvme0n1
|
Full dmesg output for ata8 is as follows::
| Code: |
dmesg | grep ata8
[ 1.140417] ata8: SATA max UDMA/133 abar m512@0xfc610000 port 0xfc610180 irq 46 lpm-pol 0
[ 4.207408] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.208557] ata8.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf
[ 4.209785] ata8.00: hard resetting link
[ 4.517627] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 4.518973] ata8.01: hard resetting link
[ 4.829620] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 4.830897] ata8.02: hard resetting link
[ 5.295565] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 5.296404] ata8.03: hard resetting link
[ 5.759574] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 5.760869] ata8.04: hard resetting link
[ 6.069577] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 6.075065] ata8.02: Model 'Samsung SSD 870 EVO 2TB', rev 'SVT03B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati
[ 6.076380] ata8.02: supports DRM functions and may not be fully accessible
[ 6.076676] ata8.02: ATA-11: Samsung SSD 870 EVO 2TB, SVT03B6Q, max UDMA/133
[ 6.077767] ata8.02: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 6.082353] ata8.02: Features: Trust Dev-Sleep NCQ-sndrcv
[ 6.083628] ata8.02: supports DRM functions and may not be fully accessible
[ 6.088628] ata8.02: configured for UDMA/133
[ 6.090109] ata8.03: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 6.091674] ata8.03: configured for UDMA/133
[ 9.151396] ata8.15: qc timeout after 3000 msecs (cmd 0xe8)
[ 9.151816] ata8.15: failed to write PMP_FEAT_EN (Emask=0x5)
[ 9.152167] ata8.15: hard resetting link
[ 9.615408] ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9.616889] ata8.00: hard resetting link
[ 9.928211] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 9.929703] ata8.01: hard resetting link
[ 10.239704] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 10.241011] ata8.02: hard resetting link
[ 10.711964] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 10.712496] ata8.03: hard resetting link
[ 11.184018] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 11.184680] ata8.04: hard resetting link
[ 11.496049] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 11.500869] ata8.02: supports DRM functions and may not be fully accessible
[ 11.507113] ata8.02: supports DRM functions and may not be fully accessible
[ 11.512532] ata8.02: configured for UDMA/133
[ 11.515894] ata8.03: configured for UDMA/133
[ 14.527729] ata8.15: qc timeout after 3000 msecs (cmd 0xe8)
[ 14.528361] ata8.15: failed to write PMP_FEAT_EN (Emask=0x5)
[ 14.528756] ata8.15: hard resetting link
[ 14.991726] ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 14.992634] ata8.00: hard resetting link
[ 15.303152] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 15.303712] ata8.01: hard resetting link
[ 15.616284] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 15.616952] ata8.02: hard resetting link
[ 16.087903] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 16.088445] ata8.03: hard resetting link
[ 16.559954] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 16.560480] ata8.04: hard resetting link
[ 16.872223] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 16.877893] ata8.02: supports DRM functions and may not be fully accessible
[ 16.883297] ata8.02: supports DRM functions and may not be fully accessible
[ 16.888706] ata8.02: configured for UDMA/133
[ 16.891977] ata8.03: configured for UDMA/133
[ 19.903721] ata8.15: qc timeout after 3000 msecs (cmd 0xe8)
[ 19.904259] ata8.15: failed to write PMP_FEAT_EN (Emask=0x5)
[ 19.904647] ata8.15: hard resetting link
[ 20.375733] ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 20.376638] ata8.00: hard resetting link
[ 20.687855] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 20.688445] ata8.01: hard resetting link
[ 21.000467] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 21.001458] ata8.02: hard resetting link
[ 21.471945] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 21.472446] ata8.03: hard resetting link
[ 21.943910] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 21.944419] ata8.04: hard resetting link
[ 22.256275] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 22.261038] ata8.02: supports DRM functions and may not be fully accessible
[ 22.267254] ata8.02: supports DRM functions and may not be fully accessible
[ 22.272632] ata8.02: configured for UDMA/133
[ 22.276368] ata8.03: configured for UDMA/133
[ 25.279722] ata8.15: qc timeout after 3000 msecs (cmd 0xe8)
[ 25.280244] ata8.15: failed to write PMP_FEAT_EN (Emask=0x5)
[ 25.280670] ata8.15: hard resetting link
[ 25.751742] ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 25.752765] ata8.00: hard resetting link
[ 26.063699] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 26.064472] ata8.01: hard resetting link
[ 26.376068] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 26.376726] ata8.02: hard resetting link
[ 26.847967] ata8.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 26.848444] ata8.03: hard resetting link
[ 27.319960] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 27.320468] ata8.04: hard resetting link
[ 27.632546] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 27.637572] ata8.02: supports DRM functions and may not be fully accessible
[ 27.643509] ata8.02: supports DRM functions and may not be fully accessible
[ 27.649378] ata8.02: configured for UDMA/133
[ 27.652886] ata8.03: configured for UDMA/133
[ 30.655752] ata8.15: qc timeout after 3000 msecs (cmd 0xe8)
[ 30.656306] ata8.15: failed to write PMP_FEAT_EN (Emask=0x5)
[ 30.656641] ata8: failed to recover PMP after 5 tries, giving up
[ 30.656890] ata8.15: Port Multiplier detaching
[ 30.657139] ata8.02: Check power mode failed (err_mask=0x40)
[ 30.657389] ata8.03: Check power mode failed (err_mask=0x40)
[ 30.657633] ata8.00: disable device
[ 31.119759] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 31.120198] ata8: EH complete
|
|
|
| Back to top |
|
 |
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5489
Location: Bavaria
|
| Posted: Wed Mar 12, 2025 9:10 pm Post subject: |
|
|
Do you use our Gentoo distribution kernel, or a self-configured kernel?
1) If it is our Gentoo dist-kernel and it does not work, then throw away this card.
2) If the latter is the case, please check whether you have activated these options:
| Code: | CONFIG_CHR_DEV_SG
CONFIG_SATA_AHCI_PLATFORM |
If these are enabled, please boot with our GentooLiveCD and check if it works. If not -> (1)
3) If it works do a "lsmod" and check every module with sata and scsi in the name.
(Possible list: CONFIG_SCSI_SPI_ATTRS, CONFIG_SATA_PMP, CONFIG_SCSI_MVUMI, CONFIG_SATA_ACARD_AHCI)
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
ipic
Guru
Joined: 29 Dec 2003
Posts: 451
Location: UK
|
| Posted: Thu Mar 13, 2025 9:26 am Post subject: |
|
|
Thanks for the pointers, appreciated.
I downloaded and booted the Gentoo liveCD, and got the same result.
Rather than throw the card in the trash, I disconnected the CD/DVR device, and then this happened:
| Code: |
[ 4.183401] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.184571] ata8.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf
[ 4.185758] ata8.00: hard resetting link
[ 4.493806] ata8.00: SATA link down (SStatus 0 SControl 330)
[ 4.495132] ata8.01: hard resetting link
[ 4.807538] ata8.01: SATA link down (SStatus 0 SControl 330)
[ 4.808880] ata8.02: hard resetting link
[ 5.119910] ata8.02: SATA link down (SStatus 0 SControl 330)
[ 5.121228] ata8.03: hard resetting link
[ 5.591808] ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 5.593107] ata8.04: hard resetting link
[ 5.901560] ata8.04: SATA link down (SStatus 0 SControl 330)
[ 5.906513] ata8.03: Model 'Samsung SSD 870 EVO 2TB', rev 'SVT03B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati
[ 5.907423] ata8.03: supports DRM functions and may not be fully accessible
[ 5.907909] ata8.03: ATA-11: Samsung SSD 870 EVO 2TB, SVT03B6Q, max UDMA/133
[ 5.908672] ata8.03: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 5.913255] ata8.03: Features: Trust Dev-Sleep NCQ-sndrcv
[ 5.913972] ata8.03: supports DRM functions and may not be fully accessible
[ 5.919591] ata8.03: configured for UDMA/133
[ 5.921074] ata8: EH complete
[ 5.921924] scsi 7:3:0:0: Direct-Access ATA Samsung SSD 870 3B6Q PQ: 0 ANSI: 5
[ 5.922726] sd 7:3:0:0: Attached scsi generic sg4 type 0
[ 5.922727] ata8.03: Enabling discard_zeroes_data
[ 5.922737] sd 7:3:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 5.924530] sd 7:3:0:0: [sde] Write Protect is off
[ 5.925060] sd 7:3:0:0: [sde] Mode Sense: 00 3a 00 00
[ 5.925071] sd 7:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.925534] sd 7:3:0:0: [sde] Preferred minimum I/O size 512 bytes
[ 5.926288] ata8.03: Enabling discard_zeroes_data
[ 5.945263] sde: sde1 sde2 sde3 sde4 sde5 sde6
[ 5.946623] sd 7:3:0:0: [sde] Attached SCSI disk
|
So, no exchangeble drive and only one SDD attached == working SDD device.
I'll experiment a bit more. |
|
| Back to top |
|
|
ipic
Guru
Joined: 29 Dec 2003
Posts: 451
Location: UK
|
| Posted: Thu Mar 13, 2025 10:56 am Post subject: |
|
|
I think it's certain that the CD/DVR was causing issues with this card.
To be fair to it, it doesn't claim to support CD type devices, just HDD and SDD.
I have attached my hot swap drive bay to the card.
When inserting a drive, a /dev/sdX device is created in the same was as when the bay is connected to the motherboard.
When removing the drive the /dev/sdX device is removed, and the 'fixed' SDD is not changed or lost.
Moral of the story seems to be: take the sales description VERY literally  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
