View previous topic :: View next topic |
Author |
Message |
ejohnson Tux's lil' helper
Joined: 20 Jan 2004 Posts: 140
|
Posted: Sat Mar 13, 2004 11:07 pm Post subject: |
|
|
bssteph wrote: | Did you use an ebuild to get the vanilla or mm? They both change the top level Makefile ever so slightly and that could cause adding the EXTRAVERSION to break. |
The first time I built love1 was with an ebuild to test out the new patch. The second build was made later after you went to sleep. I untared linux-2.6.4.tar.bz2 by hand, applied -mm1, then -love1. That is when I noticed the warning, looked for the .rej and found none. The love1-fixes.patch was then applied on top of that, diff'ed, then bunzip2'd and I moded the ebuild to make love1.
Quote: | That'd also explain the fact that there's no .rej file, the ebuild moves the original Makefile out of the way to Makefile.orig |
I believe that the patch applies correctly, but the code itself might be out of date. I'm unfortunatly at work still, so I'll be another 2.5 hours until I can look at it. |
|
Back to top |
|
|
dashel n00b
Joined: 14 Sep 2002 Posts: 57
|
Posted: Sat Mar 13, 2004 11:51 pm Post subject: |
|
|
did anyone get this to compile with the au8820 driver compiled in or as a module?
/D |
|
Back to top |
|
|
yngwin Retired Dev
Joined: 19 Dec 2002 Posts: 4572 Location: Suzhou, China
|
Posted: Sun Mar 14, 2004 12:26 am Post subject: |
|
|
I emerged with the ebuild and compiled just fine. Weird thing is though that not all my hardware sensors are working. I have w83781d loaded as a module, but it doesn't seem to do anything. Gkrellm2 (re-emerged just to make sure) recognizes only the lm75 module - which gives me my temps, but not my fan and voltages. w83781d used to work just fine in 2.6.4-rc1-love3... |
|
Back to top |
|
|
ejohnson Tux's lil' helper
Joined: 20 Jan 2004 Posts: 140
|
Posted: Sun Mar 14, 2004 12:42 am Post subject: |
|
|
yngwin wrote: | I emerged with the ebuild and compiled just fine. Weird thing is though that not all my hardware sensors are working. I have w83781d loaded as a module, but it doesn't seem to do anything. Gkrellm2 (re-emerged just to make sure) recognizes only the lm75 module - which gives me my temps, but not my fan and voltages. w83781d used to work just fine in 2.6.4-rc1-love3... |
yngwin,
That is the driver also used for the ASB100-A on my mobo. I'll check it when I get home, but I havn't noticed any thing out of the ordinary (the temps are natively off by a factor of 10 since the 2.6.1 kernel release). I normally compile that in as well so I'll test it as a module for you. |
|
Back to top |
|
|
Hackeron Guru
Joined: 01 Nov 2002 Posts: 307
|
Posted: Sun Mar 14, 2004 1:58 am Post subject: NOTHING COMPILES! |
|
|
The following refuses to compile:
======= cle266 graphics driver (via)
======= via framebuffer
======= via dri
======= via agp
======= via drm
======= alsa sequencer
======= alsa /dev/mixer oss emulation
======= alsa /dev/pcm oss emulation
Please tell me what the hell is going on, I'm using the ebuild given on the channel, and nothing works, other kernels compile fine.
I'm on the stable GCC 3.2.3 running stable gentoo, but I need this kernel for support of my via epia M motherboard.
Code: |
CC sound/last.o
make[1]: *** [sound/core] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sound] Error
|
Code: |
make[2]: *** [sound/core/pcm_misc.o] Error 1
make[1]: *** [sound/core] Error 2
make: *** [sound] Error 2
* gen_die(): compile of modules faile
|
Code: |
drivers/video/cle266/via_fbobj.c: In function `VIAPreSetTV3Mode':
drivers/video/cle266/via_fbobj.c:692: warning: ISO C90 forbids mixed declarations and code
drivers/video/cle266/via_fbobj.c: In function `VIAPostSetTV3Mode':
drivers/video/cle266/via_fbobj.c:834: warning: ISO C90 forbids mixed declarations and code
drivers/video/cle266/via_fbobj.c: In function `via_pci_probe':
drivers/video/cle266/via_fbobj.c:1433: error: too few arguments to function `register_framebuffer'
drivers/video/cle266/via_fbobj.c: At top level:
drivers/video/cle266/via_fbobj.c:1481: warning: `__used__' attribute ignored
drivers/video/cle266/via_fbobj.c: In function `viafb_setup':
drivers/video/cle266/via_fbobj.c:1528: warning: ISO C90 forbids mixed declarations and code
drivers/video/cle266/via_fbobj.c: At top level:
drivers/video/cle266/via_fbobj.c:98: warning: `TVindex' defined but not used
make[3]: *** [drivers/video/cle266/via_fbobj.o] Error 1
make[2]: *** [drivers/video/cle266] Error 2
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error
|
Code: |
sound/core/pcm_misc.c:2822: confused by earlier errors, bailing out
make[2]: *** [sound/core/pcm_misc.o] Error 1
make[1]: *** [sound/core] Error 2
make: *** [sound] Error 2
* gen_die(): compile
|
|
|
Back to top |
|
|
ejohnson Tux's lil' helper
Joined: 20 Jan 2004 Posts: 140
|
Posted: Sun Mar 14, 2004 2:34 am Post subject: |
|
|
yngwin,
You're right. On closer inspection they arn't functioning. As are many other drivers paired with 2.6.4 "stable". There have been quite a few deep changes made in this kernel release which break things in -mm1 and -love1 (loops, packetwriting, au8820, reiser4, and quite a few others including the lm sensors we both use).
We'll keep working on it |
|
Back to top |
|
|
dashel n00b
Joined: 14 Sep 2002 Posts: 57
|
Posted: Sun Mar 14, 2004 3:38 am Post subject: |
|
|
So I gather this means that the au8220 driver will stay broken this release then? -- Time to downgrade to 2.4 stable with seperate alsa drivers
/D |
|
Back to top |
|
|
ejohnson Tux's lil' helper
Joined: 20 Jan 2004 Posts: 140
|
Posted: Sun Mar 14, 2004 4:27 am Post subject: |
|
|
dashel it looks that way. As it is, I don't have the knowledge to rewrite drivers ... I need to learn more
Keep checking lkml for updates and I'm sure steel300 will include them in the next -love. |
|
Back to top |
|
|
anarchron n00b
Joined: 13 Jul 2003 Posts: 38
|
Posted: Sun Mar 14, 2004 6:23 am Post subject: |
|
|
I believe the 3c59x drivers aren't working. I've compiled them as modules and loaded them but they refuse to do anything eg. ping, dhcpcd etc |
|
Back to top |
|
|
Evil Dark Archon Guru
Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Sun Mar 14, 2004 6:48 am Post subject: |
|
|
this release also seems to have broken the reiserfs acl patch in evil-sources. _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
|
yngwin Retired Dev
Joined: 19 Dec 2002 Posts: 4572 Location: Suzhou, China
|
Posted: Sun Mar 14, 2004 10:02 am Post subject: |
|
|
ejohnson wrote: | yngwin,
You're right. On closer inspection they arn't functioning. As are many other drivers paired with 2.6.4 "stable". There have been quite a few deep changes made in this kernel release which break things in -mm1 and -love1 (loops, packetwriting, au8820, reiser4, and quite a few others including the lm sensors we both use).
We'll keep working on it |
Thanks for confirming that. I still think it's weird that this changed between rc1 and release, but so be it. Anyway, now I know it's not me. This is not critical for me, at least I get the temps from lm75.
On the other hand I can confirm this kernel compile works with my custom CFLAGS, although that was labeled experimental. I added "-march=athlon-xp -falign-jumps=4 -falign-loops=4 -falign-functions=64" - nothing too aggressive, but some nice optimizations for my processor. |
|
Back to top |
|
|
dashel n00b
Joined: 14 Sep 2002 Posts: 57
|
Posted: Sun Mar 14, 2004 10:22 am Post subject: |
|
|
ok thnx for the response Looking forward to the next love..
/D |
|
Back to top |
|
|
wrc1944 Advocate
Joined: 15 Aug 2002 Posts: 3456 Location: Gainesville, Florida
|
Posted: Sun Mar 14, 2004 10:35 am Post subject: |
|
|
I too had a problem with 2.6.4-mm1 (mm1 applied manually to kernel.org 2.6.4), but no problem applying the ck1 from the Con Kolivas home page, with the CFQ scheduler selected. Works great, but I don't select the supermount option. If you can't get Love sources to work, ck1 might be an alternative some might like, until Love is working.
wrc1944 _________________ Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.12.8 USE=experimental python3_12.7-final-0 |
|
Back to top |
|
|
PovMan Guru
Joined: 30 Sep 2002 Posts: 375 Location: Australia
|
Posted: Sun Mar 14, 2004 12:28 pm Post subject: |
|
|
chefakito wrote: | is this basically like 2.6.4_rc1-love? I still need to renice X right? |
what? where's this, i want to renice my X! _________________ I am SPAM, hear me roar.
Before posting your own topic, try to answer at least one unanswered one. |
|
Back to top |
|
|
Wikt n00b
Joined: 16 Feb 2004 Posts: 21
|
Posted: Sun Mar 14, 2004 12:39 pm Post subject: |
|
|
anarchron wrote: | I believe the 3c59x drivers aren't working. I've compiled them as modules and loaded them but they refuse to do anything eg. ping, dhcpcd etc |
They work all fine for me, but I hard-bulit them into kernel. _________________ # emerge life
emerge: there are no masked or unmasked ebuilds to satisfy "life". |
|
Back to top |
|
|
neenee Veteran
Joined: 20 Jul 2003 Posts: 1786
|
|
Back to top |
|
|
bssteph l33t
Joined: 26 Feb 2003 Posts: 652 Location: Wisconsin
|
Posted: Sun Mar 14, 2004 4:37 pm Post subject: |
|
|
The core problem with this release is not the pagecache and friends code, not the interface change in some kernel internals, or the half-done work in the bk trees to update all the drivers. The problem is these all happened at once. A lot of the more common drivers received all the necessary changes by the mm1 release, but a lot of other drivers didn't.
This is kind of a sore spot on the love release. I ask that anyone with a broken driver to wait for the next release of either mainline or mm upstream to hopefully sort out some of these changes, and then I'll take another close look at the patches introduced in love if I have to (note that this would be a great time to see if the authors of those patches have an updated release).
If love works now, great, go about your daily business. If not, sit tight for one release, a lot of things should be cleaned up soon. |
|
Back to top |
|
|
_Nomad_ Guru
Joined: 11 Apr 2003 Posts: 571
|
Posted: Sun Mar 14, 2004 7:32 pm Post subject: |
|
|
I don't know if anyone has experienced this but when trying to use the anticipatory scheduler the boot process hangs... looks like it's looking for the root partition... it's really strange... when using the cfq though everything is great... |
|
Back to top |
|
|
Evil Dark Archon Guru
Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Sun Mar 14, 2004 11:28 pm Post subject: |
|
|
the anticipatory scheduler is broken, not sure which patch causes it, but it is broken. _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
|
charlieg Advocate
Joined: 30 Jul 2002 Posts: 2149 Location: Manchester UK
|
Posted: Mon Mar 15, 2004 12:07 am Post subject: |
|
|
Evil Dark Archon wrote: | the anticipatory scheduler is broken, not sure which patch causes it, but it is broken. |
It has been for a while. _________________ Want Free games?
Free Gamer - open source games list & commentary
Open source web-enabled rich UI platform: Vexi |
|
Back to top |
|
|
Evil Dark Archon Guru
Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Mon Mar 15, 2004 2:59 am Post subject: |
|
|
2.6.4-mm2 is out _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
|
Brother Dysk Tux's lil' helper
Joined: 29 Sep 2003 Posts: 131 Location: Hong Kong SAR PRC
|
Posted: Mon Mar 15, 2004 3:39 am Post subject: |
|
|
2.6.4-love1 looking good over here. First love since 2.6.1! |
|
Back to top |
|
|
mafe n00b
Joined: 18 Dec 2003 Posts: 38
|
Posted: Mon Mar 15, 2004 4:20 am Post subject: |
|
|
anarchron wrote: | I believe the 3c59x drivers aren't working. I've compiled them as modules and loaded them but they refuse to do anything eg. ping, dhcpcd etc |
nope, they are working fine here. |
|
Back to top |
|
|
bssteph l33t
Joined: 26 Feb 2003 Posts: 652 Location: Wisconsin
|
Posted: Mon Mar 15, 2004 6:40 am Post subject: |
|
|
Alrighty, I've been working on love2. I want to see if I can get some of the drivers we introduce that are broken working again. Those concerned about a driver that we add, it would be most appreciated if you could see if there's an update from where ever you originally got the patch. I have about a dozen options in a make allyesconfig that fail, and as much as I enjoy digging around code, I'd rather not if there are updated drivers.
Thanks. I hope to have a release for you within 24 hours. |
|
Back to top |
|
|
Evil Dark Archon Guru
Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Mon Mar 15, 2004 6:48 am Post subject: |
|
|
i think that the au88x0 drivers were updated in the latest bk snapshot patch for alsa, i'm not sure if its in mm2 or not though. _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
|
|