usb & fotocamera [RISOLTO]

[jp10hp]

ciao come faccio a montare la mia fotocamera digitale??
pensavo qlc del tipo mount /dev/sg0 -t filesystem opzioni /mnt/camera ma che tipo di fs e che opzioni devo passare? la periferica è giusta?
ecco il log:

ar 28 14:05:21 tux usb 1-2: new full speed USB device using address 5
Mar 28 14:05:21 tux scsi3 : SCSI emulation for USB Mass Storage devices
Mar 28 14:05:21 tux Vendor: NIKON Model: NIKON DSC E775 Rev: 1.00
Mar 28 14:05:21 tux Type: Direct-Access ANSI SCSI revision: 02
Mar 28 14:05:21 tux Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
Mar 28 14:05:21 tux scsi.agent[5334]: how to add device type= at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host3/3:0:0:0 ??
Mar 28 14:05:21 tux WARNING: USB Mass Storage data integrity not assured
Mar 28 14:05:21 tux USB Mass Storage device found at 5

[MyZelF]

Hai il supporto per i dischi SCSI nel kernel (sd_mod)? Spesso le fotocamere vengo viste come un disco SCSI (/dev/sd*) con filesystem vfat.
_________________
"Larry the Cow was a bit frustrated at the current state of Linux Distributions..."

[jp10hp]

sì..idovrebbe esserci tutto il necessario

Module Size Used by
snd_pcm_oss 49316 0
snd_mixer_oss 17664 2 snd_pcm_oss
sg 29984 0
via_agp 6016 1
agpgart 26664 1 via_agp
yenta_socket 14720 0
pcmcia_core 61152 1 yenta_socket
uhci_hcd 29712 0
snd_via82xx 22816 1
snd_pcm 87332 2 snd_pcm_oss,snd_via82xx
snd_timer 21892 1 snd_pcm
snd_ac97_codec 60036 1 snd_via82xx
gameport 3840 1 snd_via82xx
snd_page_alloc 9604 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6400 1 snd_via82xx
snd_rawmidi 20640 1 snd_mpu401_uart
snd_seq_device 6792 1 snd_rawmidi
snd 47588 9 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7776 2 snd
via_rhine 18824 0
mii 4224 1 via_rhine
crc32 4096 1 via_rhine
nls_iso8859_1 3968 1
nls_cp437 5632 1
vfat 12672 1
fat 40768 1 vfat
nls_base 6528 4 nls_iso8859_1,nls_cp437,vfat,fat
powernow_k7 6176 0
freq_table 3460 1 powernow_k7
thermal 11536 0
processor 14896 1 thermal
button 4760 0
fan 3084 0
battery 8204 0
ac 3980 0
ide_cd 38404 0
sr_mod 13476 0
cdrom 36640 2 ide_cd,sr_mod
usb_storage 26624 0
scsi_mod 65068 3 sg,sr_mod,usb_storage
hid 30656 0

[jp10hp]

ah no ho sr_mod nn sd...ora lo carico..

eccolo:
Module Size Used by
sd_mod 11808 0

[MyZelF]

Non vedo sd_mod, che dovrebbe corrispondere a:

[jp10hp]

ora c'è anche sd_mod ..quando accendo la macchina viene creata la periferica /dev/sg0

Module Size Used by
sd_mod 11808 0
snd_pcm_oss 49316 0
snd_mixer_oss 17664 2 snd_pcm_oss
sg 29984 0
via_agp 6016 1
agpgart 26664 1 via_agp
yenta_socket 14720 0
pcmcia_core 61152 1 yenta_socket

......................

[MyZelF]

Gli altri moduli li hai caricati a mano o stai usando hotplug?

Credo che in dmesg, oltre a

[jp10hp]

sto usando hotplug...infatti ora con sd_mod le cose sono cambiate:


Mar 28 14:38:37 tux usb 1-2: new full speed USB device using address 8
Mar 28 14:38:37 tux scsi6 : SCSI emulation for USB Mass Storage devices
Mar 28 14:38:37 tux Vendor: NIKON Model: NIKON DSC E775 Rev: 1.00
Mar 28 14:38:37 tux Type: Direct-Access ANSI SCSI revision: 02
Mar 28 14:38:37 tux scsi.agent[8281]: how to add device type= at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host6/6:0:0:0 ??
Mar 28 14:38:37 tux SCSI device sda: 125440 512-byte hdwr sectors (64 MB)
Mar 28 14:38:37 tux sda: assuming Write Enabled
Mar 28 14:38:37 tux sda: assuming drive cache: write through
Mar 28 14:38:37 tux /dev/scsi/host6/bus0/target0/lun0: p1
Mar 28 14:38:37 tux Attached scsi removable disk sda at scsi6, channel 0, id 0, lun 0
Mar 28 14:38:37 tux Attached scsi generic sg0 at scsi6, channel 0, id 0, lun 0, type 0
Mar 28 14:38:37 tux WARNING: USB Mass Storage data integrity not assured
Mar 28 14:38:37 tux USB Mass Storage device found at 8

...e infatti funziona!
grazie mille!..ultima cosa che opzione devo usare perchè il disco sia accessibile r e w da un utente normale?

[jp10hp]

ho usato umask=000 e mi sembra che funzioni grazie ancora ciao

[MyZelF]