3Ware RAID and ide-scsi emulation / burning roms

[cirrus]

Hi,


I did my third Gentoo installation, but I didn't get everything running yet.

My system:

K7S5A Pro, Athlon-XP 1800+, 1GB RAM
3Ware RAID 7000-2 plus 2 x 160 GB Samsung
NVidia GF4 Ti4200
SBLive
onboard IDE0: DVD-ROM
onboard IDE1: (Mas) DVD+-RW , (Sec) CD-RW

the third installation using initrd:
Gentoo: 2.4.20-r8
KDE: 3.1.4
XFree: 4.3.99.14


Everytime I installed Gentoo I had problems with my onboard-connected burning ROMS using the ide-scsi emulation. The 3Ware-conroller module has to be loaded after loading the ide-scsi module- other way round system crahses (1st + 2nd installation). So I installed Gentoo using initrd including scsi_mod.o sd_mod.o ide-scsi.o 3w-xxxx.o. But this time when starting KDE, kdm waits approx. 5 minutes to come up! I found that during this time the scsi module seeks for the connected burning ROMS, dmesg says so...

bash-2.05b$ dmesg
t 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3985, scsi0, channel 0, id 0, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 3985) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3986, scsi0, channel 0, id 0, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 3986) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3987, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3989, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
SCSI host 0 abort (pid 3989) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3990, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
sr0: scsi3-mmc drive: 263x/0x cartridge changer
scsi : aborting command due to timeout : pid 3991, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbd) 00 00 00 00 00 00 00 00 08 00 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3991, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbd) 00 00 00 00 00 00 00 00 08 00 00
SCSI host 0 abort (pid 3991) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 4000, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 4007, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x46) 00 00 00 00 00 00 00 08 00
hdc: lost interrupt
sr0: mmc-3 profile capable, current profile: 0h
scsi : aborting command due to timeout : pid 4012, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4031, scsi0, channel 0, id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdd: lost interrupt
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
scsi : aborting command due to timeout : pid 4032, scsi0, channel 0, id 1, lun 0 UNKNOWN(0x46) 00 00 00 00 00 00 00 08 00
hdd: lost interrupt
hdd: lost interrupt
sr1: mmc-3 profile capable, current profile: 0h
bash-2.05b



What can I do now? All SCSI things are compiled as modules, initrd loads modules in the right order, but it still isn't working... :-(


Please help,
thanks Karsten.



I

[cirrus]

Problem solved!

It was no kernel, no module problem.
I only had to disable the APIC function!

My mobo's ide-controller and the 3Ware Controller won't cope with APIC !

Now I use the "noapic" option in grub.conf and everything is alright now!


Greets, Karsten.