Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ATI, Radeon and built-in DRI3. How?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Perfect Gentleman
Veteran
Veteran


Joined: 18 May 2014
Posts: 1256

PostPosted: Sat Apr 04, 2015 4:23 am    Post subject: ATI, Radeon and built-in DRI3. How? Reply with quote

I've installed xf86-video-ati-9999, enable DRI3 in conf-file, but DRI3 is not built-in module. How can it be built in ?
Code:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] (prog-if 00 [VGA controller])
        Subsystem: Gigabyte Technology Co., Ltd Turks XT [Radeon HD 6670/7670]
        Flags: bus master, fast devsel, latency 0, IRQ 26
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fdfc0000 (64-bit, non-prefetchable) [size=128K]
        I/O ports at ee00 [size=256]
        [virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: radeon

Code:
 ~ $ cat /etc/X11/xorg.conf.d/10-radeon.conf
Section "Device"
    Identifier  "Radeon"
    Driver      "radeon"
    Option      "DRI3"  "on"
    Option      "AccelMethod"   "Glamor"

Code:
 ~ $ sudo cat /var/log/Xorg.0.log | grep -i dri
[    15.933]    X.Org Video Driver: 19.0
[    15.933]    X.Org XInput driver : 21.0
[    15.934] (II) xfree86: Adding drm device (/dev/dri/card0)
[    16.168] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[    16.190]    Module class: X.Org Video Driver
[    16.190]    ABI class: X.Org Video Driver, version 19.0
[    16.190] (II) RADEON: Driver for ATI Radeon chipsets:
[    16.212] (**) RADEON(0): Option "DRI3" "on"
[    16.212] (II) Loading sub module "dri2"
[    16.212] (II) LoadModule: "dri2"
[    16.212] (II) Module "dri2" already built-in
[    16.268] (II) glamor: OpenGL accelerated X.org driver based.
[    16.728] (II) glamor: EGL version 1.4 (DRI2):
[    16.907] (II) RADEON(0): [DRI2] Setup complete
[    16.907] (II) RADEON(0): [DRI2]   DRI driver: r600
[    16.907] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    16.907] (**) RADEON(0): DRI3 enabled
[    16.992] (II) GLX: Initialized DRI2 GL provider for screen 0

and I wanna like that
Code:
[322141.971] (II) LoadModule: "dri2"
[322141.971] (II) Module "dri2" already built-in
[322141.971] (II) LoadModule: "dri3"
[322141.971] (II) Module "dri3" already built-in
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum