| View previous topic :: View next topic |
| Author |
Message |
diablo465
Apprentice
Joined: 10 Sep 2013
Posts: 194
|
 Posted: Sat Jun 27, 2015 1:24 pm Post subject: usb mouse is not working although trackpad is. |
 |
|
my laptop is like this after i upgrade from gentoo 3.10.25.
Specifically the laptop can not recongnize anything associated with mouse (e.g., usb wired mouse, usb mouse receiver) for all kerners after 3.10.25. Interestingly, the trackpad inbuilt on the laptop is working perfectly, even before X boot.
here are the configurations of my laptop (after logitech mouse receiver installed) :
lsusb
| Code: |
ae429-3176 profile # lsusb
Bus 003 Device 002: ID 10f1:1a34 Importek
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
lsmod
| Code: |
lsmod
Module Size Used by
uvcvideo 71485 0
videobuf2_vmalloc 2736 1 uvcvideo
videobuf2_memops 1799 1 videobuf2_vmalloc
videobuf2_core 25786 1 uvcvideo
v4l2_common 3914 1 videobuf2_core
videodev 120979 3 uvcvideo,v4l2_common,videobuf2_core
media 11273 2 uvcvideo,videodev
radeon 1317310 2
rtl8192ce 47660 0
rtl_pci 15483 1 rtl8192ce
rtlwifi 47583 2 rtl_pci,rtl8192ce
ttm 60270 1 radeon
rtl8192c_common 36394 1 rtl8192ce
atl1c 33834 0
vboxnetflt 15666 0
vboxnetadp 17766 0
vboxdrv 1809437 2 vboxnetadp,vboxnetflt
nfsv4 362631 0
nfs 161961 1 nfsv4
nfsd 233641 0
auth_rpcgss 41823 1 nfsd
oid_registry 2211 1 auth_rpcgss
nfs_acl 2527 1 nfsd
lockd 60071 2 nfs,nfsd
sunrpc 189272 6 nfs,nfsd,auth_rpcgss,lockd,nfsv4,nfs_acl
|
please do not hesitate to ask me if any further information is required. Thanks |
|
| Back to top |
|
 |
mir3x
Guru
Joined: 02 Jun 2012
Posts: 455
|
| Posted: Sat Jun 27, 2015 1:46 pm Post subject: |
|
|
I'm not fully understand that:
| Quote: | | here are the configurations of my laptop (after logitech mouse receiver installed) : lsusb |
Did u cut something like that :Bus 004 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
before pasting ? Or what u mean that recevier is installed ? It seems he is not installed. I guess u mean u put him in usb port.
If not u have just to enable logitech in kernel:
Device drivers ->Hid support->special hid drivers -> logitech devices
and enable Logitech Unifying receivers full support (HID_LOGITECH_DJ)
_________________
Sent from Windows |
|
| Back to top |
|
|
diablo465
Apprentice
Joined: 10 Sep 2013
Posts: 194
|
| Posted: Sat Jun 27, 2015 2:37 pm Post subject: |
|
|
thanks for the reply @mir3x.
in the first post I just paste the results of lsusb, lsmod with unifying receiver plugged in. Apparently they are not identified by the system.
I had a look on the kenrel configure and found HID_LOGITECH_DJ is enabled as inbuilding module. Still mouse is not working (mouse is tested on the another machine)
Interestingly, nothing is happening after running the following commands, and module can not be seen from the lsmod command result
| Code: |
ae429-3176 linux # modprobe -r hid_logitech_dj
modprobe: FATAL: Module hid_logitech_dj is builtin.
ae429-3176 linux # modprobe hid_logitech_dj
ae429-3176 linux # lsmod
Module Size Used by
uvcvideo 71485 0
videobuf2_vmalloc 2736 1 uvcvideo
videobuf2_memops 1799 1 videobuf2_vmalloc
videobuf2_core 25786 1 uvcvideo
v4l2_common 3914 1 videobuf2_core
videodev 120979 3 uvcvideo,v4l2_common,videobuf2_core
media 11273 2 uvcvideo,videodev
radeon 1317310 2
rtl8192ce 47660 0
rtl_pci 15483 1 rtl8192ce
rtlwifi 47583 2 rtl_pci,rtl8192ce
ttm 60270 1 radeon
rtl8192c_common 36394 1 rtl8192ce
atl1c 33834 0
vboxnetflt 15666 0
vboxnetadp 17766 0
vboxdrv 1809437 2 vboxnetadp,vboxnetflt
nfsv4 362631 0
nfs 161961 1 nfsv4
nfsd 233641 0
auth_rpcgss 41823 1 nfsd
oid_registry 2211 1 auth_rpcgss
nfs_acl 2527 1 nfsd
lockd 60071 2 nfs,nfsd
sunrpc 189272 6 nfs,nfsd,auth_rpcgss,lockd,nfsv4,nfs_acl
|
|
|
| Back to top |
|
|
diablo465
Apprentice
Joined: 10 Sep 2013
Posts: 194
|
| Posted: Sat Jun 27, 2015 2:48 pm Post subject: |
|
|
more updates:
I have updated the gentoo kernel into 4.0.5 and installed hid_logitech_dj as a modules, as shown below. Still the unifying receiver can not be found. ....
| Code: |
chenming@ae429-3176 ~ $ uname -a
Linux ae429-3176 4.0.5-gentoo #1 SMP Sun Jun 28 10:38:20 AEST 2015 x86_64 AMD E-450 APU with Radeon(tm) HD Graphics AuthenticAMD GNU/Linux
chenming@ae429-3176 ~ $ lsmod |grep hid_logitech_dj
hid_logitech_dj 10101 0
|
|
|
| Back to top |
|
|
mir3x
Guru
Joined: 02 Jun 2012
Posts: 455
|
| Posted: Sat Jun 27, 2015 6:57 pm Post subject: |
|
|
I have something in dmesg:
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2
So it means that /dev/hiddev raw HID device support (USB_HIDDEV) should be in kernel also
and /dev/hidraw raw HID device support (HIDRAW), check for them ( and maybe also USB_UHCI_HCD, at least for my system )
Btw anything from usb port works ?
EDIT_X:
I checked mint where djreceiver is as module and its lsmod looks like:
hid_generic 12548 0
hid_logitech_dj 18581 0
usbhid 53014 0
hid 101512 4 hid_generic,usbhid,hid_logitech_dj
so maybe u lack some hid* ...
_________________
Sent from Windows |
|
| Back to top |
|
|
diablo465
Apprentice
Joined: 10 Sep 2013
Posts: 194
|
| Posted: Sun Jun 28, 2015 11:53 pm Post subject: |
|
|
| mir3x wrote: | I have something in dmesg:
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2
So it means that /dev/hiddev raw HID device support (USB_HIDDEV) should be in kernel also
and /dev/hidraw raw HID device support (HIDRAW), check for them ( and maybe also USB_UHCI_HCD, at least for my system )
Btw anything from usb port works ?
EDIT_X:
I checked mint where djreceiver is as module and its lsmod looks like:
hid_generic 12548 0
hid_logitech_dj 18581 0
usbhid 53014 0
hid 101512 4 hid_generic,usbhid,hid_logitech_dj
so maybe u lack some hid* ... |
Thanks for the update. it is confirmed that usb storage is working for my laptop ATM. I then start looking for all the modules associated with hid, and build them as modules (previously they are all inbuilding kernels which I can not see the status by lsmod and cat /proc/modules)
now this is the updated situation:
| Quote: |
# modprobe usbhid
modprobe: ERROR: could not insert 'usbhid': Exec format error
# modprobe hid_generic
modprobe: ERROR: could not insert 'hid_generic': Device or resource busy
# modinfo hid
modinfo: ERROR: Module hid not found.
# lsmod |grep hid
hid_logitech_dj 10101 0
|
|
|
| Back to top |
|
|
mir3x
Guru
Joined: 02 Jun 2012
Posts: 455
|
| Posted: Mon Jun 29, 2015 8:30 am Post subject: |
|
|
Can u check dmesg when hid_logitech_dj is loaded?
Maybe there is some error about pairing.
On https://wiki.gentoo.org/wiki/Evdev its written
that some mouses needs USB_EHCI_TT_NEWSCHED.
_________________
Sent from Windows |
|
| Back to top |
|
|
diablo465
Apprentice
Joined: 10 Sep 2013
Posts: 194
|
| Posted: Mon Jun 29, 2015 12:59 pm Post subject: |
|
|
| mir3x wrote: | Can u check dmesg when hid_logitech_dj is loaded?
Maybe there is some error about pairing.
On https://wiki.gentoo.org/wiki/Evdev its written
that some mouses needs USB_EHCI_TT_NEWSCHED. |
here is the demsg for the kernel (3.10.25) that mouse is working
| Code: |
dmesg |grep Logitech
[ 2.760539] usb 4-1: Manufacturer: Logitech
[ 2.769325] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input5
[ 2.770902] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 2.779733] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input6
[ 2.783405] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 2.829659] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
|
and the following is the demsg from the kernel that mouse is not working.
| Code: |
ae429-0176 chenming # dmesg |grep Logitech
[ 2.515042] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
|
I guess hid-generic is not loaded properly (3.17.5 and 4.0.5). but once I instert hid-generic, error comes:
| Code: |
ae429-0176 chenming # modprobe hid-generic
modprobe: ERROR: could not insert 'hid_generic': Device or resource busy
|
or equivalently
| Code: |
# insmod /lib/modules/4.0.5-gentoo/kernel/drivers/hid/hid-generic.ko
insmod: ERROR: could not insert module /lib/modules/4.0.5-gentoo/kernel/drivers/hid/hid-generic.ko: Device or resource busy
|
|
|
| Back to top |
|
|
Goingtobecrazy
n00b
Joined: 13 Feb 2015
Posts: 14
|
| Posted: Thu Jul 16, 2015 7:45 pm Post subject: |
|
|
I have the exact same issue since like 7 months with my mouse.
dmesg when i connect it:
| Code: |
[20869.517729] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[20869.604799] usb 2-1.2: New USB device found, idVendor=1038, idProduct=1369
[20869.604810] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20869.604815] usb 2-1.2: Product: Sensei Raw Gaming Mouse
[20869.604820] usb 2-1.2: Manufacturer: SteelSeries
[20869.608359] hid-generic 0003:1038:1369.0003: hiddev0,hidraw2: USB HID v1.11 Device [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
[20869.609244] input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1038:1369.0004/input/input10
[20869.609382] hid-generic 0003:1038:1369.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
[20869.610235] input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:1038:1369.0005/input/input11
[20869.661025] hid-generic 0003:1038:1369.0005: input,hidraw4: USB HID v1.11 Keyboard [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
[20869.662379] input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/0003:1038:1369.0006/input/input12
[20869.712980] hid-generic 0003:1038:1369.0006: input,hidraw5: USB HID v1.11 Device [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:1d.0-1.2/input3
|
What's really interesting here, it's that my button on the border of my mouse works, but not the other one.
It's like the button assigned to the synaptics trackpoint aren't reassign to the mouse, and add more button just work.
I have a thinkpad, with 2 different trackpoint (center of the computer, and bottom). On my first install of gentoo, only the first trackpoint was working. After add some config and 50-synaptics.conf, the second tracpoint work. But i just can't use my mouse. I don't know what i have to configure, or what a 50-usb-mouse.conf looks like...
The 50-synaptics.conf:
| Code: | Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on"
Option "VertTwoFingerScroll" "on"
Option "HorizEdgeScroll" "on"
Option "HorizTwoFingerScroll" "on"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "2"
Option "EmulateTwoFingerMinZ" "40"
Option "EmulateTwoFingerMinW" "8"
Option "CoastingSpeed" "0"
Option "FingerLow" "35"
Option "FingerHigh" "40"
EndSection
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
