| View previous topic :: View next topic |
| Author |
Message |
Oschtan
n00b
Joined: 27 Dec 2008
Posts: 71
Location: Russia, Novosibirsk
|
 Posted: Sun Aug 30, 2015 3:56 am Post subject: [SOLVED]Not working 3G modem ZTE MF192+ (MF652) |
 |
|
kernel 3.18.6
| Code: | lsusb
Bus 001 Device 010: ID 19d2:1218 ZTE WCDMA Technologies MSM MF652 |
messages
| Code: | kernel: usb 1-1: new high-speed USB device number 5 using ehci-pci
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1216
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
kernel: usb 1-1: Product: MF192+
kernel: usb 1-1: Manufacturer: ZTE
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078
kernel: usb-storage 1-1:1.0: USB Mass Storage device detected
kernel: scsi host4: usb-storage 1-1:1.0
mtp-probe[5405]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
mtp-probe[5405]: bus: 1, device: 5 was not an MTP device
kernel: scsi 4:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
kernel: scsi 4:0:0:0: Attached scsi generic sg1 type 5
usb_modeswitch[5442]: switch device 19d2:1216 on 001/005
kernel: usb 1-1: USB disconnect, device number 5
cron[5467]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
kernel: usb 1-1: new high-speed USB device number 6 using ehci-pci
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1218
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
kernel: usb 1-1: Product: MF192+
kernel: usb 1-1: Manufacturer: ZTE
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078
kernel: cdc_acm 1-1:1.1: ttyACM0: USB ACM device
kernel: cdc_acm 1-1:1.3: ttyACM1: USB ACM device
kernel: cdc_acm 1-1:1.5: ttyACM2: USB ACM device
kernel: cdc_acm 1-1:1.7: ttyACM3: USB ACM device
kernel: usb-storage 1-1:1.9: USB Mass Storage device detected
kernel: scsi host5: usb-storage 1-1:1.9
root[5527]: usb_modeswitch: switched to 19d2:1218 on 001/006
kernel: scsi 5:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
kernel: scsi 5:0:0:0: Attached scsi generic sg1 type 5
mtp-probe[5563]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
mtp-probe[5563]: bus: 1, device: 6 was not an MTP device
ModemManager[4049]: <info> Creating modem with plugin 'ZTE' and '4' ports
ModemManager[4049]: <warn> Could not grab port (tty/ttyACM2): 'Cannot add port 'tty/ttyACM2', unhandled serial type'
ModemManager[4049]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1' successfully created
ModemManager[4049]: <warn> Modem couldn't be initialized: couldn't load current capabilities: Failed to determine modem capabilities.
NetworkManager[4036]: <info> (ttyACM3): new Broadband device (carrier: UNKNOWN, driver: 'cdc_acm', ifindex: 0)
NetworkManager[4036]: <info> (ttyACM3): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[4036]: <info> (ttyACM3): modem state 'unknown' |
|
|
| Back to top |
|
 |
Oschtan
n00b
Joined: 27 Dec 2008
Posts: 71
Location: Russia, Novosibirsk
|
| Posted: Mon Aug 31, 2015 7:32 am Post subject: |
|
|
It should be added file /etc/usb_modeswitch.d/19d2:1216
| Code: | ########################################################
# ZTE MF192+
DefaultVendor= 0x19d2
DefaultProduct=0x1216
TargetVendor= 0x19d2
TargetProduct= 0x1217
MessageContent="555342430800498200000000000010FF000000000000000000000000000000"
CheckSuccess=20 |
MessageContent only for ZTE MF192+, not for ZTE MF192! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
