Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
нОРХЛХГЮЖХЪ ДХЯЙЮ
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Russian
View previous topic :: View next topic  
Author Message
Bor81
n00b
n00b


Joined: 31 Aug 2003
Posts: 68
Location: Kyiv, UA

PostPosted: Thu Nov 06, 2003 7:16 am    Post subject: нОРХЛХГЮЖХЪ ДХЯЙЮ Reply with quote

оНД БОЕВЮРКЕМХЕЛ ОПНВХРЮМНЦН Б "Gentoo Weekly Newsletter"
БЕПМЕЕ ОН ЯЯШКЙЕ НРРСДЮ

лЕМЪ ХМРЕПЕЯСЕР Ю ЙЮЙ ЯЮАФ ДЕКЮЕ ПСЯЯЙХИ МЮПНД :)

ъ МЮОПХЛЕП ОНЯРЮБХК БЯЕ МЮ ЛЮЙЯХЛЮКЭМСЧ ОПНХГБНДХРЕКЭМНЯРЭ
РЕОЕПЭ ГЮХМРЕПЕЯНБЮКЮ ЯРЮАХКЭМНЯРЭ

Quote:

root@work portage # hdparm -tT /dev/hda

/dev/hda:
Timing buffer-cache reads: 912 MB in 2.00 seconds = 456.00 MB/sec
Timing buffered disk reads: 106 MB in 3.00 seconds = 35.33 MB/sec

Quote:
root@work portage # hdparm -i /dev/hda

/dev/hda:

Model=ST380021A, FwRev=3.75, SerialNo=3HV2ETXX
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode


Quote:

root@work portage # hdparm /dev/hda

/dev/hda:
multcount = 16 (on)
IO_support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 10337/240/63, sectors = 156301488, start = 0

Quote:

root@work portage # cat /etc/conf.d/hdparm | grep disc
# You can either set hdparm arguments for each drive using disc*_args and cdrom*_args..
disc0_args="-A1 -a8 -c3 -d1 -M254 -m16 -u1 -X69"
Back to top
View user's profile Send private message
Gabber
n00b
n00b


Joined: 06 Nov 2003
Posts: 4
Location: Work

PostPosted: Thu Nov 06, 2003 3:13 pm    Post subject: Reply with quote

лМЕ АШ РЮЙХЕ ЯЙНПНЯРХ :)
Ъ МЮ ЯБН╦Л БХРЕ ДЮФЕ -X66 ОНЯРЮБХРЭ МЕ ЛНЦС
_________________
LX440, Celeron 434Mhz (Mendocino), 288MB RAM, 20GB IBM, Fortemedia (Genius). Operating systems: Gentoo Linux 1.4, Redhat Linux 6.2, Windows 2000. Uptime: 21 year ;]]]
Back to top
View user's profile Send private message
Bor81
n00b
n00b


Joined: 31 Aug 2003
Posts: 68
Location: Kyiv, UA

PostPosted: Fri Nov 07, 2003 3:13 pm    Post subject: Reply with quote

ДЮ МН ЯВЮЯ ЛЕМЪ ГЮХМРЕПЕЯНБЮКЮ ЯРЮАХКЭМНЯЭ :)
ОПХ ЩРХУ ОЮПЮЛЕРПЮУ
Back to top
View user's profile Send private message
Gabber
n00b
n00b


Joined: 06 Nov 2003
Posts: 4
Location: Work

PostPosted: Fri Nov 07, 2003 3:20 pm    Post subject: Reply with quote

ЕЯКХ РБНИ фд БЯ╦ ЩРН ОНДДЕПФХБЮЕР, ОНВЕЛС ЩРН ДНКФМН АШРЭ МЕЯРЮАХКЭМШЛ ?
_________________
LX440, Celeron 434Mhz (Mendocino), 288MB RAM, 20GB IBM, Fortemedia (Genius). Operating systems: Gentoo Linux 1.4, Redhat Linux 6.2, Windows 2000. Uptime: 21 year ;]]]
Back to top
View user's profile Send private message
Jeld
Tux's lil' helper
Tux's lil' helper


Joined: 28 Jun 2002
Posts: 84
Location: NYC, US

PostPosted: Fri Nov 07, 2003 5:26 pm    Post subject: Reply with quote

/dev/hda:

Model=Maxtor 5T060H6, FwRev=TAH71DP0, SerialNo=T6HLDF1C
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0:

* signifies the current active mode

/dev/hdb:

Model=WDC WD600AB-00CDB0, FwRev=22.04A22, SerialNo=WD-WMA9S1062326
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=117231408
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

/dev/hda:
Timing buffer-cache reads: 932 MB in 2.01 seconds = 464.21 MB/sec
Timing buffered disk reads: 100 MB in 3.04 seconds = 32.90 MB/sec

/dev/hdb:
Timing buffer-cache reads: 896 MB in 2.01 seconds = 446.51 MB/sec
Timing buffered disk reads: 98 MB in 3.01 seconds = 32.57 MB/sec


Contents of /etc/conf.d/hdparm
disc0_args="-M192 -B255"
disc1_args="-M128"

uname -a
Linux mitechka 2.6.0-test9 #2 Wed Oct 29 13:37:46 EST 2003 i686 AMD Athlon(tm) XP 1800+ AuthenticAMD GNU/Linux

cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1800+
stepping : 2
cpu MHz : 1537.138
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3022.84

Easy :)
_________________
package JAPH;sub x{$/='$';@1=map{$_=ord;$_--;chr}
split//,<DATA>;@2=map{$_=ord;$_++;chr}split//
,<DATA>;$_=sub{$.++%2?shift@2:shift@1};bless$_;}
1;$x=JAPH->x;for(1..25){print&$x,;}__DATA__
Kt!ouf!fmIdf"$ts@ngqOq`jq
Back to top
View user's profile Send private message
Bor81
n00b
n00b


Joined: 31 Aug 2003
Posts: 68
Location: Kyiv, UA

PostPosted: Fri Nov 07, 2003 6:21 pm    Post subject: Reply with quote

уНРЕКНЯЭ АШ ОНОНДПНАМЕИ НА ЩРНЛ ОЮПЮЛЕРПЕ
Ю РН ЛЮМ ЙПЮРНЙ :(
Quote:

-B Set Advanced Power Management feature, if the drive supports it.
A low value means aggressive power management and a high value
means better performance. A value of 255 will disable apm on the
drive.
Back to top
View user's profile Send private message
Unik
n00b
n00b


Joined: 24 Aug 2003
Posts: 36
Location: Moscow, Russia

PostPosted: Tue Nov 11, 2003 9:45 pm    Post subject: Reply with quote

Bor81 wrote:
уНРЕКНЯЭ АШ ОНОНДПНАМЕИ НА ЩРНЛ ОЮПЮЛЕРПЕ
Ю РН ЛЮМ ЙПЮРНЙ :(
Quote:

-B Set Advanced Power Management feature, if the drive supports it.
A low value means aggressive power management and a high value
means better performance. A value of 255 will disable apm on the
drive.

МЮЯЙНКЭЙН Ъ ОНМЪК, ВЕЛ ЛЕМЭЬЕ ГМЮВЕМХЕ, РЕЛ АНКЭЬЕ БПЕЛЕМХ ДПЮИБ АСДЕР АЕГДЕИЯРБНБЮРЭ ОПЕПЕД СУНДНЛ Б "ЯСЯОЕМД" (ХКХ ЙЮЙ РЮЛ ЕЦН)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Russian All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum