| View previous topic :: View next topic |
| Author |
Message |
MarioMaster100
Tux's lil' helper
Joined: 25 Jul 2014
Posts: 86
|
 Posted: Tue Dec 15, 2015 4:53 am Post subject: USB 3.0 not detected in 3.0 port |
 |
|
I've had this issue on both the 4.I.6 and the 4.3.2 kernel. I have both XHCI_HCD and USB_XHCI_PCI set as modules in the kernel but the 3.0 usb's won't show up in the 3.0 port with lsblk. The 3.0 devices do show up in the 2.0 port though and 2.0 devices show up in either port. Here is a sample dmesg:
| Code: | $ dmesg|grep -i usb
[ 6.801985] ACPI: bus type USB registered
[ 6.802015] usbcore: registered new interface driver usbfs
[ 6.802026] usbcore: registered new interface driver hub
[ 6.802056] usbcore: registered new device driver usb
[ 6.939847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.972338] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.995085] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.995222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.995224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.995226] usb usb1: Product: EHCI Host Controller
[ 6.995228] usb usb1: Manufacturer: Linux 4.3.2-gentoo ehci_hcd
[ 6.995230] usb usb1: SerialNumber: 0000:00:1a.0
[ 6.995439] hub 1-0:1.0: USB hub found
[ 6.995689] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.015111] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 7.015235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.015237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.015238] usb usb2: Product: EHCI Host Controller
[ 7.015240] usb usb2: Manufacturer: Linux 4.3.2-gentoo ehci_hcd
[ 7.015241] usb usb2: SerialNumber: 0000:00:1d.0
[ 7.015416] hub 2-0:1.0: USB hub found
[ 7.315330] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 7.322589] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 7.332531] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.332533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.332535] usb usb3: Product: xHCI Host Controller
[ 7.332536] usb usb3: Manufacturer: Linux 4.3.2-gentoo xhci-hcd
[ 7.332537] usb usb3: SerialNumber: 0000:03:00.0
[ 7.332676] hub 3-0:1.0: USB hub found
[ 7.332798] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 7.332826] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.332855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.332856] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.332858] usb usb4: Product: xHCI Host Controller
[ 7.332859] usb usb4: Manufacturer: Linux 4.3.2-gentoo xhci-hcd
[ 7.332860] usb usb4: SerialNumber: 0000:03:00.0
[ 7.332972] hub 4-0:1.0: USB hub found
[ 7.345365] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 7.465853] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 7.465862] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.466146] hub 1-1:1.0: USB hub found
[ 7.495862] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 7.495865] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.496182] hub 2-1:1.0: USB hub found
[ 7.745710] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 7.775717] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 7.856546] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07d6
[ 7.856555] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.856560] usb 1-1.1: Product: Intel(R) Centrino(R) Wireless-N + WiMAX 6150
[ 7.856564] usb 1-1.1: Manufacturer: Intel Corporation
[ 7.889200] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 7.889208] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.889212] usb 2-1.2: Product: USB Receiver
[ 7.889216] usb 2-1.2: Manufacturer: Logitech
[ 7.935853] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 8.108136] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5710
[ 8.108145] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 8.108150] usb 1-1.2: Product: USB 2.0 UVC VGA WebCam
[ 8.108154] usb 1-1.2: Manufacturer: Azurewave
[ 8.108158] usb 1-1.2: SerialNumber: 0x0001
[ 9.962749] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 9.969146] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
[ 9.969198] usbcore: registered new interface driver uvcvideo
[ 9.969199] USB Video Class driver (1.1.1)
[ 10.169398] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input19
[ 10.169672] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 10.171760] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input20
[ 10.228213] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 10.228251] usbcore: registered new interface driver usbhid
[ 10.228252] usbhid: USB HID core driver
[ 1476.742192] usb usb3: root hub lost power or was reset
[ 1476.742199] usb usb4: root hub lost power or was reset
[ 1477.742990] usb usb3: root hub lost power or was reset
[ 1477.742998] usb usb4: root hub lost power or was reset
[ 1478.743823] usb usb3: root hub lost power or was reset
[ 1478.743831] usb usb4: root hub lost power or was reset
[ 1479.744659] usb usb3: root hub lost power or was reset
[ 1479.744667] usb usb4: root hub lost power or was reset
[ 1480.745495] usb usb3: root hub lost power or was reset
[ 1480.745503] usb usb4: root hub lost power or was reset
[ 1481.746331] usb usb3: root hub lost power or was reset
[ 1481.746338] usb usb4: root hub lost power or was reset
[ 1482.747164] usb usb3: root hub lost power or was reset
[ 1482.747172] usb usb4: root hub lost power or was reset
[ 1483.747998] usb usb3: root hub lost power or was reset
[ 1483.748006] usb usb4: root hub lost power or was reset
[ 1484.748879] usb usb3: root hub lost power or was reset
[ 1484.748886] usb usb4: root hub lost power or was reset
[ 1485.749672] usb usb3: root hub lost power or was reset
[ 1485.749680] usb usb4: root hub lost power or was reset
[ 1486.750505] usb usb3: root hub lost power or was reset
[ 1486.750513] usb usb4: root hub lost power or was reset
[ 1487.751341] usb usb3: root hub lost power or was reset
[ 1487.751349] usb usb4: root hub lost power or was reset
[ 1488.752176] usb usb3: root hub lost power or was reset
[ 1488.752184] usb usb4: root hub lost power or was reset
[ 1489.753014] usb usb3: root hub lost power or was reset
[ 1489.753022] usb usb4: root hub lost power or was reset
[ 1490.753891] usb usb3: root hub lost power or was reset
[ 1490.753898] usb usb4: root hub lost power or was reset
[ 1491.754681] usb usb3: root hub lost power or was reset
[ 1491.754689] usb usb4: root hub lost power or was reset
[ 1492.755519] usb usb3: root hub lost power or was reset
[ 1492.755527] usb usb4: root hub lost power or was reset
[ 1493.756398] usb usb3: root hub lost power or was reset
[ 1493.756405] usb usb4: root hub lost power or was reset
[ 1494.757232] usb usb3: root hub lost power or was reset
[ 1494.757240] usb usb4: root hub lost power or was reset
[ 1495.758069] usb usb3: root hub lost power or was reset
[ 1495.758077] usb usb4: root hub lost power or was reset
[ 1496.758908] usb usb3: root hub lost power or was reset
[ 1496.758916] usb usb4: root hub lost power or was reset
[ 1654.910893] usb usb3: root hub lost power or was reset
[ 1654.910901] usb usb4: root hub lost power or was reset
[ 1655.911743] usb usb3: root hub lost power or was reset
[ 1655.911751] usb usb4: root hub lost power or was reset
[ 1656.912584] usb usb3: root hub lost power or was reset
[ 1656.912591] usb usb4: root hub lost power or was reset
[ 1657.913418] usb usb3: root hub lost power or was reset
[ 1657.913425] usb usb4: root hub lost power or was reset
[ 1658.914237] usb usb3: root hub lost power or was reset
[ 1658.914244] usb usb4: root hub lost power or was reset
[ 1659.915087] usb usb3: root hub lost power or was reset
[ 1659.915095] usb usb4: root hub lost power or was reset
[ 1660.915925] usb usb3: root hub lost power or was reset
[ 1660.915933] usb usb4: root hub lost power or was reset
[ 1661.916741] usb usb3: root hub lost power or was reset
[ 1661.916749] usb usb4: root hub lost power or was reset
[ 1662.917596] usb usb3: root hub lost power or was reset
[ 1662.917604] usb usb4: root hub lost power or was reset
[ 1664.919263] usb usb3: root hub lost power or was reset
[ 1664.919270] usb usb4: root hub lost power or was reset
[ 1665.505141] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1665.521917] usb 4-1: New USB device found, idVendor=125f, idProduct=db8a
[ 1665.521926] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1665.521930] usb 4-1: Product: ADATA USB Flash Drive
[ 1665.521934] usb 4-1: Manufacturer: ADATA
[ 1665.521938] usb 4-1: SerialNumber: 13B05085408402EB
[ 1665.605940] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1665.606015] scsi host6: usb-storage 4-1:1.0
[ 1665.606131] usbcore: registered new interface driver usb-storage
[ 1665.616046] usbcore: registered new interface driver uas
[ 1666.764836] scsi 6:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 6
[ 1669.092642] usb 4-1: USB disconnect, device number 2
[ 1720.965985] usb usb3: root hub lost power or was reset
[ 1720.965993] usb usb4: root hub lost power or was reset
[ 1721.376131] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[ 1721.576933] usb 3-1: New USB device found, idVendor=0781, idProduct=556b
[ 1721.576942] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1721.576946] usb 3-1: Product: Cruzer Edge
[ 1721.576950] usb 3-1: Manufacturer: SanDisk
[ 1721.576954] usb 3-1: SerialNumber: 20042204621130C2A945
[ 1721.578464] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1721.578645] scsi host7: usb-storage 3-1:1.0
[ 1736.409673] usb 3-1: USB disconnect, device number 4
[ 2807.963232] usb usb3: root hub lost power or was reset
[ 2807.963240] usb usb4: root hub lost power or was reset
[ 2808.569191] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2808.589475] usb 4-1: New USB device found, idVendor=125f, idProduct=db8a
[ 2808.589486] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2808.589493] usb 4-1: Product: ADATA USB Flash Drive
[ 2808.589499] usb 4-1: Manufacturer: ADATA
[ 2808.589506] usb 4-1: SerialNumber: 13B05085408402EB
[ 2808.591193] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 2808.591479] scsi host8: usb-storage 4-1:1.0
[ 2809.752280] scsi 8:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 6 |
|
|
| Back to top |
|
 |
chithanh
Developer
Joined: 05 Aug 2006
Posts: 2158
Location: Berlin, Germany
|
| Posted: Tue Dec 15, 2015 9:49 pm Post subject: |
|
|
| Check withthat the kernel actually has the xhci_hcd driver in use for your USB 3.0 controller. |
|
| Back to top |
|
|
MarioMaster100
Tux's lil' helper
Joined: 25 Jul 2014
Posts: 86
|
| Posted: Tue Dec 15, 2015 11:38 pm Post subject: |
|
|
| chithanh wrote: | | Check withthat the kernel actually has the xhci_hcd driver in use for your USB 3.0 controller. |
Looks like it is.
| Code: | lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family DRAM Controller
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family MEI Controller
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. HM65 Express Chipset Family LPC Controller
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family SMBus Controller
Kernel modules: i2c_i801
02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67)
Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: ASUSTeK Computer Inc. ASM1042 SuperSpeed USB Host Controller
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
Subsystem: ASUSTeK Computer Inc. AR8151 v2.0 Gigabit Ethernet
Kernel driver in use: atl1c
|
|
|
| Back to top |
|
|
MarioMaster100
Tux's lil' helper
Joined: 25 Jul 2014
Posts: 86
|
| Posted: Sun Dec 20, 2015 9:11 pm Post subject: |
|
|
| Now in the 4.3.3 kernel the usb 3.0 port isn't working with any usb devices. This problem just refuses to go away :/ |
|
| Back to top |
|
|
MarioMaster100
Tux's lil' helper
Joined: 25 Jul 2014
Posts: 86
|
| Posted: Fri Apr 08, 2016 7:20 pm Post subject: |
|
|
Update: I'm on the 4.5.0 kernel and nothing shows up in the 3.0 port. I have discovered I can get it to work if I first plug in the device then run | Code: | | rmmod xhci_pci && modprobe xhci_pci |
Still no permanent solution though. |
|
| Back to top |
|
|
1clue
Advocate
Joined: 05 Feb 2006
Posts: 2569
|
| Posted: Fri Apr 08, 2016 8:57 pm Post subject: |
|
|
| Is your system checking for usb2 devices before it checks for usb3 devices? |
|
| Back to top |
|
|
MarioMaster100
Tux's lil' helper
Joined: 25 Jul 2014
Posts: 86
|
| Posted: Fri Apr 08, 2016 9:28 pm Post subject: |
|
|
| 1clue wrote: | | Is your system checking for usb2 devices before it checks for usb3 devices? |
I really don't know. |
|
| Back to top |
|
|
1clue
Advocate
Joined: 05 Feb 2006
Posts: 2569
|
| Posted: Fri Apr 08, 2016 10:53 pm Post subject: |
|
|
| And I don't really know how to check. It's just an idea that came up. I checked mine, I have a system which came with usb2 and added a usb3/sata3 card. My usb3 is recognized correctly. I've never had this problem. |
|
| Back to top |
|
|
mastacloak
Apprentice
Joined: 01 Aug 2004
Posts: 174
Location: Berlin / Germany
|
| Posted: Mon May 16, 2016 6:35 pm Post subject: |
|
|
Not 100% sure if it's related to the problem, but my USB 3.0 disk didn't show up, too.
I have a different USB 3.0 Controller:
| Code: | | 45:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) |
dmesg only printed something like
| Code: | | usb 3-2: new high-speed USB device number 2 using xhci_hcd |
and nothing more happened.
Since I have a tailored kernel with all necessary stuff compiled in and without an initramfs, I thought I give genkernel a try.
And in fact, when I booted the system with genkernel-baked kernel, I could plug in my USB 3 disk and it showed up. dmesg now shows something like
| Code: | usb 3-2: new high-speed USB device number 2 using xhci_hcd
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd |
and continues further discovering partitions and so on.
So, I examined my kernel config and the one provided by genkernel. I came to the conclusion that my kernel config was not missing any relevant config options, but the main difference was that most of the genkernel config options were built as modules.
To see if that really makes a difference, I changed the following in the gernkernel config:
| Code: | | CONFIG_BLK_DEV_SD=m |
to | Code: | | CONFIG_BLK_DEV_SD=y |
After that the genkernel kernel didn't show the USB 3 disk, too!
Long story short:
My new kernel config selects the following options as module instead of built-in:
BLK_DEV_SD, USB_XHCI_HCD, USB_XHCI_PCI, EXT4_FS, USB_STORAGE
and additionally most of the USB_STORAGE_* even if I don't need them, but without them my USB 3 disk will not be recognized.
Due to the modularization the new kernel now requires an initramfs to boot it.
Maybe you give this a try or you may directly try a genkernel-baked kernel.
I'm not a kernel expert, but for me this looks like a timing issue. Perhaps USB_STORAGE probes through the USB_STORAGE_* modules and that somehow gives time to recognize the SuperSpeed device. But that's only speculation. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
