| View previous topic :: View next topic |
| Author |
Message |
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
 Posted: Sat Oct 22, 2016 5:35 pm Post subject: [SOLVED] Wierd Ralink Wifi issue |
 |
|
Hi
I'm having a wierd issue with my Ralink wifi card.
| Code: | Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at c3510000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-9f-50-6b-70-2a-9c
Kernel driver in use: rt2800pci
Kernel modules: rt2800pci
|
| Code: | CONFIG_RT2800PCI_RT3290=y
|
Ok First i thought its was Network Manager related, so i'm using wpa_supplicant , but nothing has changed.
Ok here's the weird thing.
If i reboot my laptop, then the Hardware is not detected, no wifi.
If i shutdown my Laptop, no matter how, and restart, wifi works, no problem at all.
I also tried some Intel cards that i have lying around, but got sick of the ucode not loaded hell, so i gave up.
The Ralink card works, just not if i reboot the laptop.
I looked into rfkill,
here what it looks like when i shutdown the system.
| Code: | 0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
|
and if i reboot.
| Code: |
Oct 22 18:45:25 my_laptop kernel: ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
Oct 22 18:45:26 my_laptop kernel: ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
Oct 22 18:45:26 my_laptop kernel: ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
Oct 22 18:45:26 my_laptop /etc/init.d/wpa_supplicant[2674]: start-stop-daemon: failed to start `/usr/sbin/wpa_supplicant'
Oct 22 18:45:26 my_laptop /etc/init.d/wpa_supplicant[2653]: ERROR: wpa_supplicant failed to start
Could not set interface wlan0 flags (UP): Input/output error
nl80211: Could not set interface 'wlan0' UP
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
wlan0: Failed to initialize driver interface
Oct 22 18:45:28 my_laptop dhcpcd[2699]: no interfaces have a carrier
Oct 22 18:45:28 my_laptop dhcpcd[2699]: forked to background, child pid 2729
|
And when i reboot the system
| Code: | 0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
|
Same ,but wifi driver is not activated 
And no connection at all
if i press FN+(WIFI(F12 in my case) ) then i can only Toggle Soft block ON or OFF.
Anybody had or having similar issue with this card.
Thanks in advanced.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz
Last edited by spidark on Sun Mar 05, 2017 8:24 pm; edited 1 time in total |
|
| Back to top |
|
 |
Ant P.
Watchman
Joined: 18 Apr 2009
Posts: 6920
|
| Posted: Sat Oct 22, 2016 7:05 pm Post subject: |
|
|
I've seen those errors a long time ago, but turning it off and on again usually fixed it. Mine was only a RT2860 though.
It might help to have your driver as a module, and make sure PCIE hotplug is enabled in the kernel. It might not make sense, but on mine it was necessary for the keyboard switch to work. |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sat Oct 22, 2016 8:25 pm Post subject: |
|
|
| Ant P. wrote: | I've seen those errors a long time ago, but turning it off and on again usually fixed it. Mine was only a RT2860 though.
It might help to have your driver as a module, and make sure PCIE hotplug is enabled in the kernel. It might not make sense, but on mine it was necessary for the keyboard switch to work. |
Hi Ant P
| Code: |
CONFIG_RT2800PCI_RT3290=y
CONFIG_HOTPLUG_PCI_PCIE=y |
Both are activated.
The RT2800PCI is noted as EXPERIMENTAL
| Code: |
<M> Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support │ │
│ │ [ ] rt2800pci - Include support for rt33xx devices │ │
│ │ [ ] rt2800pci - Include support for rt35xx devices (EXPERIMENTAL) │ │
│ │ [ ] rt2800pci - Include support for rt53xx devices (EXPERIMENTAL) │ │
│ │ [*] rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)
|
With Keyboard switch i guessing the FN+ keys.
This works.
I have no Hardware switch on this machine.
Saw on the net that HP_WMI should be disabled, but this is not enabled in the kernel.
So im puzzled on this one.
I know it worked in another distro, so there is something i'm missing.
Thanks for your answer and help.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sat Oct 22, 2016 9:17 pm Post subject: |
|
|
Install linux-firmware. If this does not work, look on the network firmware for this card. Give us the outcome of these commands lsusb, and modinfo modules that you are using.
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 7:20 am Post subject: |
|
|
| olejseba wrote: | | Install linux-firmware. If this does not work, look on the network firmware for this card. Give us the outcome of these commands lsusb, and modinfo modules that you are using. |
Good Morning olejseba,
Here's the outputs you requested.
$ eix -I linux-firmware
| Code: | [I] sys-kernel/linux-firmware
Available versions: 20151207 ~20160223 20160331 ~20160616 ~20160628 **99999999 {savedconfig}
Installed versions: 20160331(01:45:50 AM 10/22/2016)(savedconfig)
Homepage: https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git
Description: Linux firmware files
|
#lsusb
| Code: |
Bus 002 Device 003: ID 0bda:58de Realtek Semiconductor Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0461:4d81 Primax Electronics, Ltd Dell N889 Optical Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
modinfo rt2800pci
| Code: |
filename: /lib/modules/4.4.21-gentoo/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
license: GPL
firmware: rt2860.bin
description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 26CCED9E0CE5EFBFA9B8882
alias: pci:v00001814d00003290sv*sd*bc*sc*i*
alias: pci:v00001A3Bd00001059sv*sd*bc*sc*i*
alias: pci:v00001462d0000891Asv*sd*bc*sc*i*
alias: pci:v00001432d00007768sv*sd*bc*sc*i*
alias: pci:v00001432d00007758sv*sd*bc*sc*i*
alias: pci:v00001432d00007748sv*sd*bc*sc*i*
alias: pci:v00001432d00007738sv*sd*bc*sc*i*
alias: pci:v00001432d00007728sv*sd*bc*sc*i*
alias: pci:v00001432d00007727sv*sd*bc*sc*i*
alias: pci:v00001432d00007708sv*sd*bc*sc*i*
alias: pci:v00001814d00003092sv*sd*bc*sc*i*
alias: pci:v00001814d00003091sv*sd*bc*sc*i*
alias: pci:v00001814d00003090sv*sd*bc*sc*i*
alias: pci:v00001814d00000781sv*sd*bc*sc*i*
alias: pci:v00001814d00000701sv*sd*bc*sc*i*
alias: pci:v00001814d00000681sv*sd*bc*sc*i*
alias: pci:v00001814d00000601sv*sd*bc*sc*i*
depends: rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree: Y
vermagic: 4.4.21-gentoo SMP mod_unload
parm: nohwcrypt:Disable hardware encryption. (bool) |
# grep -i EEPROM .config
| Code: |
# EEPROM support
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_TTPCI_EEPROM is not set
|
# grep -i MMIO .config
| Code: |
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_MMIOTRACE is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
|
Im guessing BT issues here but im not sure.
So i activated these BT options
grep -i CONFIG_BT .config
| Code: |
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIUART_3WIRE is not set
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_BCM is not set
# CONFIG_BT_HCIUART_QCA is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BTRFS_FS is not set
|
All the same, a reboot turns off the card somehow
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54834
Location: 56N 3W
|
| Posted: Sun Oct 23, 2016 8:46 am Post subject: |
|
|
spidark,
How many different network control packages do you have installed and active?
Having them installed is OK but having more than one active at a time means that they fight over the intrface(s),
As a result, none of them work properly.
| Code: | | Oct 22 18:45:26 my_laptop /etc/init.d/wpa_supplicant[2653]: ERROR: wpa_supplicant failed to start |
can be an indicator of this issue.
To make the Intel WiFI work, the two parts of the driver, the kernel module and its firmware need to be in the same place.
When the kernel module is configured as <*>, the firmware must be built into the kernel too.
When the kernel module is configured as <M>, the firmware must be in /lib/firmware/...
No other combinations work. The firmware mus be present when the kernel module is initalised.
Make it work as <M>, so you don't need a kernel rebuild to fix missing firmware. At your next routine kernel update change to build in if you want to.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 9:40 am Post subject: |
|
|
| NeddySeagoon wrote: | spidark,
How many different network control packages do you have installed and active?
|
Hi NeddySeagoon
plasma-meta pulls in NetworkManager by default, but its not activated.
Same issue with plain xfce4, with no NetworManager installed just plain wpa_supplicant and dhcpcd.
At the moment i'm back on plasma.
| Code: | rc-status --all
Runlevel: nonetwork
local [ started ]
Runlevel: default
syslog-ng [ started ]
wpa_supplicant [ started ]
dhcpcd [ started ]
netmount [ started ]
consolekit [ started ]
xdm [ started ]
cronie [ started ]
local |
| NeddySeagoon wrote: |
| Code: | | Oct 22 18:45:26 my_laptop /etc/init.d/wpa_supplicant[2653]: ERROR: wpa_supplicant failed to start |
can be an indicator of this issue.
|
Above only happens when i reboot the system, i did install a different distro on the Laptop, and had no issues, rebooting gave no issues, so i'm missing something 
On gentoo if i enable NetworkManager with plasma-NM, it does show the wifi button, but no wifi broadcast are shown in the list.
| NeddySeagoon wrote: |
To make the Intel WiFI work, the two parts of the driver, the kernel module and its firmware need to be in the same place.
When the kernel module is configured as <*>, the firmware must be built into the kernel too.
When the kernel module is configured as <M>, the firmware must be in /lib/firmware/...
No other combinations work. The firmware mus be present when the kernel module is initalised.
Make it work as <M>, so you don't need a kernel rebuild to fix missing firmware. At your next routine kernel update change to build in if you want to. |
Hmmm i think both parts of the driver was build into the kernel,which worked, but when i rebooted , i got some could not load firmware trunck error, hmmm i did not pay much attention, but i think this also happend when i rebooted the system.
I gave up pretty quick.
Maybe i can try out the Intel card again.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sun Oct 23, 2016 9:59 am Post subject: |
|
|
Ok. It's a full PCI bus card. Give us lspci. Something like that.
#lspci
| Code: |
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-V (rev 05)
|
Then:
lspci -n -v -s 00:19.0
| Code: |
00:19.0 0200: 8086:15a1 (rev 05)
Subsystem: 1043:85c4
Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0
Memory at fb300000 (32-bit, non-prefetchable) [size=128K]
Memory at fb339000 (32-bit, non-prefetchable) [size=4K]
I/O ports at f020 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
|
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 10:03 am Post subject: |
|
|
Ok olejseba
lspci
| Code: |
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
07:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
07:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
|
lspci -n -v -s 07:00.0
| Code: |
07:00.0 0280: 1814:3290
Subsystem: 103c:18ec
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at c3510000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-9f-50-6b-70-2a-9c
Kernel driver in use: rt2800pci
Kernel modules: rt2800pci
|
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sun Oct 23, 2016 10:26 am Post subject: |
|
|
ok. It means that hw -> kernel (firmware) is ok. vendor and model are supported by the module. So, the problem probably is in the configuration of NetworkManager / wpa_supplicant dhcp.
Give us:
ps -ef | egrep "wpa | Network | dhcp" and ifconfig -a
Also check the wifi use a flag in the package networkmanager.
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 10:43 am Post subject: |
|
|
ps -ef | egrep "wpa"
| Code: | root 2654 1 0 09:10 ? 00:00:00 /usr/sbin/wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0
root 19113 19007 0 12:33 pts/1 00:00:00 grep -E --colour=auto wpa |
ps -ef | egrep network
| Code: |
root 19158 19007 0 12:37 pts/1 00:00:00 grep -E --colour=auto network
|
ps -ef | egrep dhcp
| Code: |
root 2701 1 0 09:10 ? 00:00:00 /sbin/dhcpcd -q
root 19162 19007 0 12:37 pts/1 00:00:00 grep -E --colour=auto dhcp |
ifconfig -a
| Code: |
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 38:ea:a7:ea:74:a3 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 1162 bytes 104604 (102.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1162 bytes 104604 (102.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sit0: flags=128<NOARP> mtu 1480
sit txqueuelen 1 (IPv6-in-IPv4)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.188.19 netmask 255.255.255.0 broadcast 192.168.188.255
inet6 fe80::f28:5ddc:c077:a6b4 prefixlen 64 scopeid 0x20<link>
ether 9c:2a:70:6b:50:9f txqueuelen 1000 (Ethernet)
RX packets 151731 bytes 196133391 (187.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 92046 bytes 10227923 (9.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 10:47 am Post subject: |
|
|
| Code: | kde-frameworks/networkmanager-qt
Latest version available: 5.26.0-r2
Latest version installed: 5.26.0-r2
Unstable version: 5.27.0
Use Flags (stable): -debug -teamd -test
Size of downloaded files: 153 kB
Homepage: https://www.kde.org/
Description: NetworkManager bindings for Qt
License: LGPL-2
* net-misc/networkmanager
Latest version available: 1.4.0-r1
Latest version installed: 1.4.0-r1
Unstable version: 1.4.2
Use Flags (stable): +bluetooth +consolekit +dhclient +introspection +modemmanager +ncurses +nss +ppp +wext +wifi -abi_x86_32 -audit -connection-sharing -gnutls -json -ofono -resolvconf -systemd -teamd -test -test -vala
Size of downloaded files: 3,612 kB
Homepage: https://wiki.gnome.org/Projects/NetworkManager
Description: A set of co-operative tools that make networking simple and straightforward
License: GPL-2+
net-wireless/wpa_supplicant
Latest version available: 2.6
Latest version installed: 2.6
Unstable version: 2.6
Use Flags (stable): +dbus +hs2-0 +qt5 +readline +ssl -ap -eap-sim -fasteap -gnutls -p2p -qt4 -smartcard -tdls -uncommon-eap-types -wps
Size of downloaded files: 2,688 kB
Homepage: http://hostap.epitest.fi/wpa_supplicant/
Description: IEEE 802.1X/WPA supplicant for secure wireless transfers
License: || ( GPL-2 BSD )
|
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sun Oct 23, 2016 10:54 am Post subject: |
|
|
OK. As you can see you receive network parameters. Are they correct ?. Show us the result of the command route, ethtool wlan0. And cat /etc/resolv.conf.
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54834
Location: 56N 3W
|
| Posted: Sun Oct 23, 2016 11:03 am Post subject: |
|
|
spidark,
... and The idea being to see if wpa_supplicant is being started several times.
That in itself is not an error but if its started several times, it means that several things are trying to use it.
With several calls, the interface be just get confused.
wpa_supplicant can be added to the default runlevel. Don't do that.
dhcpcd can start wpa_supplicant, if its configured that way.
Network Manager can start wpa_supplicant too.
Disable Network Manager and if wpa_supplicant is in any runlevel, take it out.
If wpa_supplicant is being started still, something else is doing it. Possibly, dhcpcd, maybe the network scripts.
Find out what it is and fix it so that wpa_supplicant does not start. At this point, your WiFi won't work at all but its an essential step.
With no wpa_supplicant at startup, you can choose exactly one way start it. Network Manager will do, if that's what you want to use.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 12:53 pm Post subject: |
|
|
Ok im back,
Sorry
| Code: | binfmt | boot
bluetooth | default
bootmisc | boot
consolekit | default
cronie | default
devfs | sysinit
dmesg | sysinit
fsck | boot
hostname | boot
hwclock | boot
iptables | sysinit
keymaps | boot
killprocs | shutdown
kmod-static-nodes | sysinit
local | default nonetwork
localmount | boot
loopback | boot
modules | boot
mount-ro | shutdown
mtab | boot
netmount | default
procfs | boot
root | boot
savecache | shutdown
swap | boot
swapfiles | boot
sysctl | boot
sysfs | sysinit
syslog-ng | default
termencoding | boot
tmpfiles.dev | sysinit
tmpfiles.setup | boot
udev | sysinit
urandom | boot
xdm | default |
Hi NeddySeagoon
Well i tried different combo's
I noticed that i had dhcpcd and wpa_supplicant added to the startup default levels.
So i removed wpa_supplicant, starting the system with only dhcpcd, this works as long if i shutdown the system.
Rebooting the system still gives issue.
I also removed both wpa_supplicant and dhcpcd and only added dhcpd
same issue
| Code: | * Starting WPA Supplicant Daemon ...
Successfully initialized wpa_supplicant
Could not set interface wlan0 flags (UP): Input/output error
nl80211: Could not set interface 'wlan0' UP
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
wlan0: Failed to initialize driver interface
* start-stop-daemon: failed to start `/usr/sbin/wpa_supplicant'
* Failed to start wpa_supplicant
Starting DHCP Client Daemon ...
wlan0: starting wpa_supplicant
wlan0: failed to start wpa_supplicant
wlan0: Successfully initialized wpa_supplicant
Could not set interface wlan0 flags (UP): Input/output error
nl80211: Could not set interface 'wlan0' UP
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
wlan0: Failed to initialize driver interface [ ok ]
* /var/run/dhcp: creating directory
* /var/run/dhcp: correcting owner
* /var/lib/dhcp: correcting owner
* /var/lib/dhcp/dhcpd.leases: creating file
* /var/lib/dhcp/dhcpd.leases: correcting mode
* /var/lib/dhcp/dhcpd.leases: correcting owner
* Starting dhcpd ...
* start-stop-daemon: failed to start `/usr/sbin/dhcpd' [ !! ]
* ERROR: dhcpd failed to start |
My wpa_supplicant config.
| Code: | # Allow users in the 'wheel' group to control wpa_supplicant
ctrl_interface=DIR=/var/run/wpa_supplicant
ctrl_interface_group=wheel
# Make this file writable for wpa_gui / wpa_cli
#update_config=1
network={
ssid="MY_WIRELESS_ID ENCODED"
#psk="MY WIFI KEY ENCODED"
psk=a7657497286b2e5e1beeca4e340f1468a3fd340639c1523838bfd1ed4bffa169
scan_ssid=1
proto=RSN
key_mgmt=WPA-PSK
group=CCMP TKIP
pairwise=CCMP TKIP
priority=5
} |
Something is preventing driver access on reboot.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 1:15 pm Post subject: |
|
|
route
| Code: |
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.178.1 0.0.0.0 UG 304 0 0 wlan0
loopback 0.0.0.0 255.0.0.0 U 0 0 0 lo
192.168.178.0 0.0.0.0 255.255.255.0 U 304 0 0 wlan0 |
ethtool wlan0
| Code: |
Settings for wlan0:
Link detected: yes
|
cat /etc/resolv.conf
| Code: |
# Generated by dhcpcd from wlan0.dhcp
# /etc/resolv.conf.head can replace this line
domain myisp
nameserver 1234567
nameserver 1234567
# /etc/resolv.conf.tail can replace this line
|
dhcpcd generates this file.
Im installing plasma-nm and activating Networkmanager to see what's changed.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 1:29 pm Post subject: |
|
|
dmesg output.
| Code: |
[ 10.705379] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 11.805319] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 11.805327] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 23.134648] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 24.234598] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 24.234601] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 25.338573] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 26.438549] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 26.438557] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 38.145890] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 39.245858] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 39.245865] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 40.349787] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 41.449733] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 41.449740] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 53.145083] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 54.245094] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 54.245101] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 55.349038] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 56.448981] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 56.448989] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) |
Above Error only is i reboot the system.
Kinda remind me of old hdd that needed to spin down before you start the system.
Puzzled and interesting.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sun Oct 23, 2016 2:55 pm Post subject: |
|
|
In my opinion you have a good ip correct rooting. only dns bad. Give us a ping roue defaul ip.
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54834
Location: 56N 3W
|
| Posted: Sun Oct 23, 2016 3:02 pm Post subject: |
|
|
spidark,
| Code: | * Starting WPA Supplicant Daemon ...
Successfully initialized wpa_supplicant
Could not set interface wlan0 flags (UP): Input/output error
nl80211: Could not set interface 'wlan0' UP |
When this happens does wlan0 actually exist or is it called something else?
I'm beginning to think that the hardware reset signal which is generated from the PSU pwr_good signal does something for your WiFi chip that a reboot fails to do.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 3:48 pm Post subject: |
|
|
| NeddySeagoon wrote: |
When this happens does wlan0 actually exist or is it called something else?
|
I think so
After a reboot i can do this.
ip addr
| Code: | 4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether blablabla |
But i cannot do this.
| Code: |
ifconfig wlan0 up
SIOCSIFFLAGS: Input/output error |
and funny rfkill states, nothing is blocked.
| Code: | rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no |
I can however soft block the wifi with FN+F12(wifi on/off key combo)
I also removed net.ifnames=0 from grub,
issue remains.
Original name is wlo1
| NeddySeagoon wrote: |
I'm beginning to think that the hardware reset signal which is generated from the PSU pwr_good signal does something for your WiFi chip that a reboot fails to do. |
It's not a big deal, i can live with a shutdown and restart, but i'm very curious to know what's causing this. 
So is this hardware ??
But it worked, just not on gentoo
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54834
Location: 56N 3W
|
| Posted: Sun Oct 23, 2016 4:00 pm Post subject: |
|
|
spidark,
It may be the kernel driver. Try an older/newer kernel.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 4:04 pm Post subject: |
|
|
| NeddySeagoon wrote: | spidark,
It may be the kernel driver. Try an older/newer kernel. |
Trying kernel-4.4.26 
Ill let you know if that fixed the issue.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54834
Location: 56N 3W
|
| Posted: Sun Oct 23, 2016 4:30 pm Post subject: |
|
|
spidark,
4.8.x is in testing. | Code: | $ uname -a
Linux NeddySeagoon_Static 4.8.1-gentoo #3 SMP PREEMPT Fri Oct 14 15:59:40 BST 2016 x86_64 AMD Phenom(tm) II X6 1090T Processor AuthenticAMD GNU/Linux |
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
olejseba
Tux's lil' helper
Joined: 04 Sep 2005
Posts: 95
|
| Posted: Sun Oct 23, 2016 5:04 pm Post subject: |
|
|
Decide. Do you want to be configured with or without NetworkManager'a.
Without -> / etc / init.d / NetworkManager stop, /etc/init.d/dhcpcd stop. /etc/init.d/wpa_supplicant start. See only ping a default route # ping IP
With NetworkManager -> /etc/init.d/dhcpcd stop, stop /etc/init.d/wpa_supplicatnt, /etc/init.d/NetworkManager start nmtui as root -> create new connections.
_________________
"Logic will get you from A to B. Imagination will take you everywhere."
Albert Einstein |
|
| Back to top |
|
|
spidark
Tux's lil' helper
Joined: 01 Sep 2011
Posts: 147
|
| Posted: Sun Oct 23, 2016 7:26 pm Post subject: |
|
|
Hi Neddy and Olejseba
Ok back again.
gentoo-sources-4.8.4 did not fix the issue.
sys-kernel/linux-firmware-20160628 ( unstable) did not fix the issue.
This fixed the reboot issue.
I still need to do a full shutdown to get a connection.
But if i have an active connection, and before rebooting the system, i deactivate the wifi card with FN+F12( disable wifi) and reboot, ( maybe this also works if i do rfkill block all, not sure).
But after the systems reboots ,i get a connection.
| olejseba wrote: |
With NetworkManager -> /etc/init.d/dhcpcd stop, stop /etc/init.d/wpa_supplicatnt, /etc/init.d/NetworkManager start nmtui as root -> create new connections. |
This fixed the not auto connecting issue with NetworkManager
| NeddySeagoon wrote: |
spidark,
4.8.x is in testing.
|
Did not find 4.8.1 in portage.
So im testing 4.8.4.
Not sure where to go from here, to me it's Partially solved. 
Maybe test my Intel-Cards
Thanks for the Help Neddy and Olejseba and of course Ant P.
_________________
Laptop HP Pavilion G6 2310-SD Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz |
|
| Back to top |
|
|
|
Networking & Security
