| View previous topic :: View next topic |
| Author |
Message |
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
 Posted: Wed Nov 09, 2016 5:36 pm Post subject: OpenRC - problem with status of service |
 |
|
I need help about init script.
I start the script and it says that it is ok (* Starting cored server ...) and when i hit one more time start command it's written * WARNING: cored has already been started. BUT when check status it's written crashed ( * status: crashed). When I do stop, script stops service on correct way.
The issue is status of service. I didn't implement status because it is built-in. Please help me how to solve issue about status.
Below is script
------------------------------------------------------------------------------------------------ | Code: |
#!/sbin/openrc-run
# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
depend() {
#need localmount
use net
}
start() {
ebegin "Starting cored server"
start-stop-daemon --umask 0 -d /home/app/control --user test --background --start --exec \
env GENICAM_GENTL32_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_32bit" GENICAM_GENTL64_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_64bit" \
/home/app/control/vmsis_cored \
#--make-pidfile --pidfile /var/run/vmsis_cored.pid
eend $?
}
stop() {
ebegin "Stopping vmsis_cored server"
start-stop-daemon --user vlatacom --stop --exec /home/app/control/vmsis_cored \
#--pidfile /var/run/vmsis_cored.pid --retry 5
eend $?
} |
------------------------------------------------------------------------------------------------
Application /home/app/control/vmsis_cored is a daemon.
When I start application in console everything is ok.
[Moderator edit: added [code] tags to preserve output layout. -Hu] |
|
| Back to top |
|
 |
Atom2
Apprentice
Joined: 01 Aug 2011
Posts: 185
|
| Posted: Wed Nov 09, 2016 10:20 pm Post subject: Re: OpenRC - problem with status of service |
|
|
kolanim,
I don't really know what you are trying to do, but this command line
| Code: | start-stop-daemon --umask 0 -d /home/app/control --user test --background --start --exec \
env GENICAM_GENTL32_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_32bit" GENICAM_GENTL64_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_64bit" \
/home/app/control/vmsis_cored \
#--make-pidfile --pidfile /var/run/vmsis_cored.pid |
looks plain wrong syntactically.
Without going into too much further details of the rest of your script, I assume the respective code line should read as follows (NOTE: I have also re-orderd the command line to make it more logical - this, however, is not strictly necessary): | Code: | start-stop-daemon --start --background \
--env GENICAM_GENTL32_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_32bit" \
--env GENICAM_GENTL64_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_64bit" \
--umask 0 \
--chdir /home/app/control \
--user test \
--pidfile /var/run/vmsis_cored.pid --make-pidfile \
--exec /home/app/control/vmsis_cored |
Regards Atom2 |
|
| Back to top |
|
|
Roman_Gruber
Advocate
Joined: 03 Oct 2006
Posts: 3846
Location: Austro Bavaria
|
| Posted: Wed Nov 09, 2016 10:41 pm Post subject: |
|
|
Please use the code tags, (buttons) and quote (buttons). There is a reason why they are there
I'm not sure if it's good coding practise to refer to a home subdirectory for a service? Should it not belong to /usr /var or somewhere else to the reference (FHS standard)? |
|
| Back to top |
|
|
pjp
Administrator
Joined: 16 Apr 2002
Posts: 20549
|
| Posted: Thu Nov 10, 2016 4:40 am Post subject: Re: OpenRC - problem with status of service |
|
|
| kolanim wrote: | | when check status it's written crashed ( * status: crashed). When I do stop, script stops service on correct way. |
| kolanim wrote: | | The issue is status of service. I didn't implement status because it is built-in. Please help me how to solve issue about status. |
What do you do to check the status to get the message "status: crashed" message?
_________________
Quis separabit? Quo animo? |
|
| Back to top |
|
|
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
| Posted: Thu Nov 10, 2016 9:07 am Post subject: Re: OpenRC - problem with status of service |
|
|
| Atom2 wrote: | kolanim,
I don't really know what you are trying to do, but this command line
| Code: | start-stop-daemon --umask 0 -d /home/app/control --user test --background --start --exec \
env GENICAM_GENTL32_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_32bit" GENICAM_GENTL64_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_64bit" \
/home/app/control/vmsis_cored \
#--make-pidfile --pidfile /var/run/vmsis_cored.pid |
looks plain wrong syntactically.
Without going into too much further details of the rest of your script, I assume the respective code line should read as follows (NOTE: I have also re-orderd the command line to make it more logical - this, however, is not strictly necessary): | Code: | start-stop-daemon --start --background \
--env GENICAM_GENTL32_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_32bit" \
--env GENICAM_GENTL64_PATH="/usr/local/Vimba_1_3/AVTGigETL/CTI/x86_64bit" \
--umask 0 \
--chdir /home/app/control \
--user test \
--pidfile /var/run/vmsis_cored.pid --make-pidfile \
--exec /home/app/control/vmsis_cored |
Regards Atom2 |
I edited script with your re-ordered code and the it behaves the same like before. start,stop, restart does how it is expected.
My service works properly, just status of the service is always crashed.
My application must be run as non-root user.
Any idea? A programmer will implement that a daemon creates pid file but he can do it next week. That's my last hope. |
|
| Back to top |
|
|
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
| Posted: Thu Nov 10, 2016 9:13 am Post subject: Re: OpenRC - problem with status of service |
|
|
| pjp wrote: | | kolanim wrote: | | when check status it's written crashed ( * status: crashed). When I do stop, script stops service on correct way. |
| kolanim wrote: | | The issue is status of service. I didn't implement status because it is built-in. Please help me how to solve issue about status. |
What do you do to check the status to get the message "status: crashed" message? |
/etc/init.d/vmsis_cored status. It's important to give me correct status (started) because I will watchdog that service. |
|
| Back to top |
|
|
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
| Posted: Thu Nov 10, 2016 9:24 am Post subject: |
|
|
| Roman_Gruber wrote: | Please use the code tags, (buttons) and quote (buttons). There is a reason why they are there
I'm not sure if it's good coding practise to refer to a home subdirectory for a service? Should it not belong to /usr /var or somewhere else to the reference (FHS standard)? |
It doesn't matter where is the home directory it will behave same. I need to discover why when I start service the status is crashed but everything works fine. |
|
| Back to top |
|
|
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
| Posted: Thu Nov 10, 2016 10:24 am Post subject: OpenRC - problem with status of service |
|
|
The problem is solved. I forced programmer to implement that daemon creates a pid file. And after that status is ok.
Before the pid of process was different then in pid file. |
|
| Back to top |
|
|
Atom2
Apprentice
Joined: 01 Aug 2011
Posts: 185
|
| Posted: Thu Nov 10, 2016 2:44 pm Post subject: Re: OpenRC - problem with status of service |
|
|
| kolanim wrote: | | Before the pid of process was different then in pid file. |
Well that suggests, that the script itself forced the process into the background (by creating a new process and thus daemonizing the process). As a result of this the PID written into the PID file by start-stop-daemon was clearly different: In fact it was the PID of the process that later started the daemonized process (probably in a double inderection) and that process clearly terminated after the daemonization. The method with --make-pidfile and --background used in your init script only works when the process started actually runs in the foreground. The backgrounding is then done by start-stop-daemon instead.
Have a look at the man page of start-stop-daemon. Under --make-pidfile it states: | Quote: | -m, --make-pidfile
Saves the pid of the daemon in the file specified by the -p, --pidfile option. Only useful when used with daemons
that run in the foreground and forced into the background with the --b, --background option. |
Regards Atom2 |
|
| Back to top |
|
|
kolanim
n00b
Joined: 09 Nov 2016
Posts: 6
|
| Posted: Thu Nov 10, 2016 4:08 pm Post subject: Re: OpenRC - problem with status of service |
|
|
| Atom2 wrote: | | kolanim wrote: | | Before the pid of process was different then in pid file. |
Well that suggests, that the script itself forced the process into the background (by creating a new process and thus daemonizing the process). As a result of this the PID written into the PID file by start-stop-daemon was clearly different: In fact it was the PID of the process that later started the daemonized process (probably in a double inderection) and that process clearly terminated after the daemonization. The method with --make-pidfile and --background used in your init script only works when the process started actually runs in the foreground. The backgrounding is then done by start-stop-daemon instead.
Have a look at the man page of start-stop-daemon. Under --make-pidfile it states: | Quote: | -m, --make-pidfile
Saves the pid of the daemon in the file specified by the -p, --pidfile option. Only useful when used with daemons
that run in the foreground and forced into the background with the --b, --background option. |
Regards Atom2 |
Just to clearly. My daemon is made to go in background but daemon did not make pid file by itself.
The solution is implementation that feature by programmer. Script is not changed, just the order that you posted.
But I agree with you in all what you posted. |
|
| Back to top |
|
|
|
Gentoo on AMD64
