2.6 error

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

11-5-03 date for the 2.6 livecd
I finished the bootstrap process.
when I do
emerge system
I get the following error
www.mike.daugird.com/gentoo/error.txt

I had to reboot to get the error uploaded to my site.

right now I am at the livecd bash prompt.
anyone know why my "C compiler cannot create executables"?
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

Joffer · Posted: Thu Nov 13, 2003 2:53 pm Post subject:

How did you boot with that CD?

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

the error message gives my cflags list.
are these wrong for the 2.6 kernel?

amd xp 2500
KT400 motherboard (abit KD7-s) S-ata is disabled.
thanks for any input and have a good day
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

joffer, I don't understand your question.
the 2.6 livecd just boots without any input from me.
It gets my network chip and I am up and running.
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

the iso I downloaded and burned is
livecd-2.6_11-05-2003.iso
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

I don't think that it is my cflags.
I re-chrooted and I modified my cflags to be -O2 and that my cpu is an athlon-xp

when I try to emerge glibc I get an error about the size of a long double?

unable to calculate the sizeof(long double) 77
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

the 2.6 version of genkernel needs some work I think.

I got the 2.6 live cd to instal a bootable system with a stage3 tarbal.

problem is when I reboot, I don't have a module for my network card.(this is the card that was autodetected by the live cd which allowed me to download the stage3 tarball.)

I am now redoing the kernel part with the manual kernel config.

My questions are with the manual kernel compile how do I get the initrd image?

it does boot, not much running but I used the mm-sources-test9-mm2
Any help is appreciated.

PS. now that I have things running can I now change my use and cflags and run emerge world?

I only went to stage3 because stage1 told me my compiler couldn't make executables....see above error.txt file.

I would like to optimize this system a little more. (why else would I play with 2.6

)
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support

Joffer · Posted: Thu Nov 13, 2003 11:09 pm Post subject:

mike4148 · l33t Joined: 09 Sep 2003 Posts: 641

The problem is that -yet_exec; is that in your CFLAGS?

badgers · l33t Joined: 04 Sep 2003 Posts: 680 Location: Madison, WI

hello world.
this is my 2.6 install running lynx!
I am having some problems so I will start a new thread but thanks to those who helped.
_________________
Abit KD7-S
Athlon XP2500+
166mHz FSB
512 Meg PC3200 Ram running at 166mHz
LiteOn DVD dual Layer burner(hdc)

2.6.17 Suspend2 kernel with no scsi support