| View previous topic :: View next topic |
| Author |
Message |
T-Bird151
n00b
Joined: 13 Nov 2003
Posts: 5
Location: Pittsburgh, PA
|
 Posted: Thu Nov 13, 2003 9:02 pm Post subject: Question about FujiFilm USB Pen Drive |
 |
|
I really hope that I can soon post in the thread about laptops which are working fully. A few more things to go though.
One problem that I do have right now is getting my USB Harddrive to work. I've followed a couple of guides on these forums but I still cannot get it to work. I also tried to format the USB harddrive, it worked, but the system will still not recognize the USB drive all the time.
Some of the symptoms are:
1. The USB harddrive will sometimes recognize on the system, but it won't recognize almost 95% of the time.
2. When I issue 'dmesg' the USB information comes up as this:
| Code: |
hub.c: new USB device 00:1d.2-1, assigned address 2
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Fujifilm Model: USB Drive Rev: 3.04
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 6
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
|
Any help would be greatly appreciated!
Thanks |
|
| Back to top |
|
 |
T-Bird151
n00b
Joined: 13 Nov 2003
Posts: 5
Location: Pittsburgh, PA
|
| Posted: Sat Nov 15, 2003 3:21 am Post subject: |
|
|
| So any help guys...sorry, I'm new at linux and don't know what to do about the USB drive. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
