| View previous topic :: View next topic |
| Author |
Message |
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
 Posted: Fri Nov 14, 2003 3:16 pm Post subject: [agpgart] Il mio chipset nn c'è tra quelli del kernel... |
 |
|
Alura, sarò diretto:
Sto cercando di avere l'acc. 3d sul laptop (dal quale ho tolto tutto di Win, compresa l'etichetta col logo 'Designed for Microsoft Windows XP' !!!), un Fujitsu-siemens Amilo A 600...
Monta una Radeon Mobility IGP320M (ho già letto il post di tavec https://forums.gentoo.org/viewtopic.php?t=99232&highlight=igp320), ma nn è il metodo che voglio usare.
Volevo partire provando con xfree-drm.
Allora inizio a mettere i pezzi di kernel giusti, indi
| Code: | #cd /usr/src/linux
#make menuconfig |
e cerco il chipset giusto nella sezione character devices, sopo aver selezionato agpgart.
Il problema:
| Code: | #lspci | grep AGP
00:00.0 Host Bridge: Ati Technologies Inc AGP Bridge [IGP 320M] (rev 13)
|
Benebenebene, queso nei vari chipset (Intel, VIA, AMD, SiS, ALI, Serverworks) nn c'è!!!!!!!!!!
Che fo?????????
Grazie....
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
 |
Gandalf98
Guru
Joined: 28 Feb 2003
Posts: 472
Location: Loano
|
| Posted: Fri Nov 14, 2003 4:08 pm Post subject: |
|
|
| Perchè non ti piace il metodo del post che hai linkato? |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Fri Nov 14, 2003 4:20 pm Post subject: |
|
|
1- Mi sono sempre trovato molto bene col DRM
2- Non mi va di passare al vanilla
3- Non mi va di patchare XFree86
4- Ho provato a ricompilare il kernel con TUTTI i supporti per tutti i vari chipset, ho installato il DRM, ho modificato XF86Config, ho caricato il modulo radeon, ho dato startx ed X va, purtroppo col poratile nn posso dare glxinfo | grep rendering perchè nn ho il tasto | (so che il codice ascii è 124, ma ho provato con ALT+FN+JKU (con FN trasformo JKU in 124) o CTRL+FN+JKU o ogni possibile cominazione di tasti funz. ma nn mi fa inserire i codici ascii), se lancio glxgears le rotelle girano, anche se lentamente.
A dopo!!
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
mirko_3
l33t
Joined: 02 Nov 2003
Posts: 605
Location: Birreria
|
| Posted: Fri Nov 14, 2003 4:38 pm Post subject: |
|
|
potrebbe essere solo perchè la mia kernel è 2.6.0, ma io ho chipset ATI sotto agpgart... con molti altri che non hai elencato...
se lo hanno aggiunto nel 2.6.0, forse ti conviene aggiornare, tanto ormai è stabile... e veloce..
_________________
Non fa male! Non fa male! |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Fri Nov 14, 2003 4:40 pm Post subject: |
|
|
Stai facendo confusione.
Non c'entra il chipset con quello che hai postato.
Posta l'output del comando dmesg.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Sat Nov 15, 2003 12:45 am Post subject: |
|
|
Roger, eccoti il dmesg
| Code: | Linux version 2.4.20-gentoo-r8 (root@PortatilOne) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #3 ven nov 14 20:01:11 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
BIOS-e820: 0000000017f00000 - 0000000018000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
382MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 98032
zone(0): 4096 pages.
zone(1): 93936 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7790
ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x17efbcc8
ACPI: FADT (v001 ATI Raptor 01540.00000) @ 0x17efee9c
ACPI: SSDT (v001 PTLTD POWERNOW 01540.00000) @ 0x17efef10
ACPI: DSDT (v001 COMPAL CY26____ 01540.00000) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: root=/dev/hda3 video=vesa:ywrap,mtrr vga=0x318
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1191.742 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2378.95 BogoMIPS
Memory: 382120k/392128k available (1572k kernel code, 7444k reserved, 264k data, 124k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD mobile AMD Athlon (tm) 1400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1192.2449 MHz.
..... host bus clock speed is 264.4988 MHz.
cpu: 0, clocks: 1324988, slice: 662494
CPU0<T0:1324976,T1:662480,D:2,S:662494,C:1324988>
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE63
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10, enabled at IRQ 5)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10, disabled)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 10 *11)
ACPI-1103: *** Error: Method execution failed, AE_AML_UNINITIALIZED_LOCAL
ACPI: PCI Interrupt Link [LNKU] (IRQs 9, disabled)
ACPI: Embedded Controller [EC0] (gpe 25)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI-1103: *** Error: Method execution failed, AE_AML_UNINITIALIZED_LOCAL
ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 0
PCI: No IRQ known for interrupt pin A of device 00:02.0 - using IRQ 11
PCI: No IRQ known for interrupt pin A of device 00:04.0<6>PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xe0000000, mapped to 0xd8809000, size 2304k
vesafb: mode is 1024x768x24, linelength=3072, pages=55
vesafb: protected mode interface info at c000:5137
vesafb: pmi: set display start = c00c51cb, set palette = c00c5217
vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 20
PCI: No IRQ known for interrupt pin A of device 00:04.0ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2018GAS, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c016cba4, I/O limit 4095Mb (mask 0xffffffff)
hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0x8c00, 00:02:3f:b0:30:92, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 320M
agpgart: unsupported bridge
agpgart: no supported devices found.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Yenta IRQ list 0000, PCI irq11
Socket status: 30000006
Yenta IRQ list 0000, PCI irq11
Socket status: 30000006
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
Adding Swap: 987988k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: QSI Model: DVD/CDRW SBW-161 Rev: SX09
Type: CD-ROM ANSI SCSI revision: 02
usb.c: registered new driver hub
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
spurious 8259A interrupt: IRQ7.
|
Cmq l'accelerazione 3d ho visto che nn va...
Cmq dando adesso una scorsa all'output ho visto che nn è l'unica cosa che nn funge...
Vabbè, una alla volta...
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Sat Nov 15, 2003 4:35 am Post subject: |
|
|
Oki, ho scarricato e installato il kernel 2.6.0-test9...
Mi piace....
Bè, questo è il mio nuovo dmesg con suddetto kernel... | Code: |
Linux version 2.6.0-test9 (root@PortatilOne) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #3 Sat Nov 15 07:24:05 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
BIOS-e820: 0000000017f00000 - 0000000018000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
382MB LOWMEM available.
On node 0 totalpages: 98032
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 93936 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7790
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x17efbcc8
ACPI: FADT (v001 ATI Raptor 0x06040000 ATI 0x000f4240) @ 0x17efee9c
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x17efef10
ACPI: DSDT (v001 COMPAL CY26____ 0x06040000 MSFT 0x0100000e) @ 0x00000000
Building zonelist for node : 0
Kernel command line: root=/dev/hda3 video=vesa:ywrap,mtrr vga=0x318
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1192.380 MHz processor.
Console: colour dummy device 80x25
Memory: 384236k/392128k available (2076k kernel code, 7124k reserved, 804k data, 160k init, 0k highmem)
Calibrating delay loop... 2318.33 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon (tm) 1400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1192.0417 MHz.
..... host bus clock speed is 264.0981 MHz.
NET: Registered protocol family 16
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 10 *11)
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (Node d7e2f700), AE_AML_UNINITIALIZED_LOCAL
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (Node d7e2f700), AE_AML_UNINITIALIZED_LOCAL
ACPI: PCI Interrupt Link [LNKU] (IRQs 9)
ACPI: Embedded Controller [EC0] (gpe 25)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f77c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa032, dseg 0x400
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
SCSI subsystem initialized
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (Node d7e2f700), AE_AML_UNINITIALIZED_LOCAL
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (Node d7e2f700), AE_AML_UNINITIALIZED_LOCAL
_CRS returns NULL! Using IRQ 9 for device (PCI Interrupt Link [LNKU]).
ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: No IRQ known for interrupt pin A of device 0000:00:04.0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xe0000000, mapped to 0xd8809000, size 16384k
vesafb: mode is 1024x768x24, linelength=3072, pages=55
vesafb: protected mode interface info at c000:5137
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
powernow: AMD K7 CPU detected.
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: Found PSB header at c00f0640
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 14 PST tables. (Only dumping ones relevant to this CPU).
powernow: PST:0 (@c00f0650)
powernow: cpuid: 0x780 fsb: 133 maxFID: 0xc startvid: 0xb
powernow: FID: 0x4 (5.0x [665MHz]) VID: 0x13 (1.200V)
powernow: FID: 0x6 (6.0x [798MHz]) VID: 0x12 (1.225V)
powernow: FID: 0x9 (7.5x [997MHz]) VID: 0xd (1.350V)
powernow: FID: 0xc (9.0x [1197MHz]) VID: 0xb (1.450V)
powernow: Minimum speed 665 MHz. Maximum speed 1197 MHz.
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
ACPI: Thermal Zone [THRM] (66 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP320/M chipset
agpgart: Maximum main memory to use for agp memory: 320M
agpgart: AGP aperture is 64M @ 0xd4000000
[drm] Initialized radeon 1.9.0 20020828 on minor 0
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xd9833800, 00:02:3f:b0:30:92, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Warning: ATI Radeon IGP Northbridge is not yet fully tested.
ALI15X3: IDE controller at PCI slot 0000:00:04.0
ACPI: No IRQ known for interrupt pin A of device 0000:00:04.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2018GAS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Console: switching to colour frame buffer device 128x48
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 160k freed
Adding 987988k swap on /dev/hda2. Priority:-1 extents:1
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
|
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
Gandalf98
Guru
Joined: 28 Feb 2003
Posts: 472
Location: Loano
|
| Posted: Sat Nov 15, 2003 8:15 am Post subject: |
|
|
A parte gli errori dell'ACPI, mi sembra che con il 2.6 non ci siano problemi. AGPgart ha riconosciuto il tuo device e non dà nessun errore!
Funziona tutto? |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Sat Nov 15, 2003 10:09 am Post subject: |
|
|
Infatti.
Comunque non sono riuscito a vedere il chipset della tua scheda madre...
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
Gandalf98
Guru
Joined: 28 Feb 2003
Posts: 472
Location: Loano
|
| Posted: Sat Nov 15, 2003 10:54 am Post subject: |
|
|
Probabilmente è dovuto al fatto che la scheda video è integrata!
Sul mio pc con scheda video non integrata scrive il modello del chipset della MB
| Code: | agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
|
Invece nel suo dmesg indica direttamente la scheda video!!
| Quote: | | agpgart: Detected Ati IGP320/M chipset |
Cià |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Sat Nov 15, 2003 11:16 am Post subject: |
|
|
Forse non ci stiamo capendo.
I chipset che elencava stefanonafets all'inizio del post NON sono della scheda video, ma del chipset della piastra madre!
| stefanonafets wrote: | | Benebenebene, queso nei vari chipset (Intel, VIA, AMD, SiS, ALI, Serverworks) nn c'è!!!!!!!!!! |
Era questo che volevo sottolineare 
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Sat Nov 15, 2003 12:22 pm Post subject: |
|
|
Bè, quello che intendevo (a scanso di equivoci) è quello che in lspci viene indicato come AGP Bridge, ke è un ATI, nn supportato dal 2.4.x, ma lo è dal 2.6.0-testX...
Problema: do startx (apparte il fatto che il pan nn funge +), do glxgears e le rotelle girano mooolto + velocemente di prima (~200fps), ma glxinfo mi da sempre rendering: off...
Non capisco, inquanto l'acc.3d semba fungere, ma glxinfo dice di no (programmino pessimista...  )
Ho emerso tuxkart per provare, ma il comando tuxkart sembra nn esistere (e se do emerge -p tuxkart mi dice [ebuild R ] ...
Mo sto ricompilando xfree xchè nell'output mi diceva una roba tipo system: 2.4.20-gentoo ecc, ma io ho cambiato kernel!!!
Un paio di orette (sono le 13.00, dovrebbe finire per le ~15.00) e vedum se cambia qualche cosa...
Un'ultima domanda, ma questa è circa XF86Config, nella sezione modules devo toglierlo 'radeon', visto ke l'ho compilato staticamente??
A ke ci sono vi butto li un'altra domanduola (circa il kernel 2.6), durante gli init, mi dice una roba tipo 'mounting /sys: not mounted, unnecessary in kernels 2.5+ (poi vi do l'output preciso), oki, nn va montato, ma per toglierlo glagli init??
Graaazie...
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
Gandalf98
Guru
Joined: 28 Feb 2003
Posts: 472
Location: Loano
|
| Posted: Sat Nov 15, 2003 1:23 pm Post subject: |
|
|
| Quote: | | Ho emerso tuxkart per provare, ma il comando tuxkart sembra nn esistere |
Mi è successa una cosa simile recentemente! Alcuni giochi ora vengono installati in /usr/games/bin/ che non essendo nel PATH....
Comunque te ne puoi accorgere facilmente con
| Quote: | | Mo sto ricompilando xfree xchè nell'output mi diceva una roba tipo system: 2.4.20-gentoo ecc |
/usr/src/linux dove punta??? Non so come funzionino le cose con la radeon, ma con nvidia se non punta al kernel attualmente in uso quando emergi i driver non parte nulla!!!
| Quote: | | mi dice una roba tipo 'mounting /sys |
Il 2.6 ne ha bisogno!!
| Quote: | | apparte il fatto che il pan nn funge + |
Cosè il pan????
Cià |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Sat Nov 15, 2003 6:44 pm Post subject: |
|
|
Sorry, il pad, il touchpad (Alps Point Device, visto ed utilizzato come psaux).
L' xfree-drm nn è utilizzabile, mi da il chiaro segnale di errore
| Code: | | !!!Please link /usr/src/linux to the 2.4 kernel source. xfree-drm is not yet working with 2.6 kernels, use the DRM in the kernel. |
E così ho fatto, ho compilato il DRI del kernel...
| Code: | qpkg -l tuxkart
-bash: qpkg: command not found |
... (siamo alle solite, che devo emergere xhcè quel comando vada??)
| Quote: | | Alcuni giochi ora vengono installati in /usr/games/bin/ |
Oki, è esattamente li, l'ho lanciato e ho visto che effettivamente il 3d hw non va...
Bo, non so + ke fare visto ke
1- xfree-drm nn va col 2.6
2- i driver del 2.6 nn vanno con xfree-4.3 ...
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
Gandalf98
Guru
Joined: 28 Feb 2003
Posts: 472
Location: Loano
|
| Posted: Sat Nov 15, 2003 7:17 pm Post subject: |
|
|
qpkg fa parte del gentoolkit installalo e datti un'occhiata ai comandi sono UTILISSIMI!!!!!
Per il touchpad non so che dirti, non avendo un portatile non ho mai dovuto affrontare il problema!!!
Cià |
|
| Back to top |
|
|
stefanonafets
l33t
Joined: 10 Feb 2003
Posts: 644
|
| Posted: Sat Nov 15, 2003 7:42 pm Post subject: |
|
|
Ho trovato una patch fhe foorse potrebbe andare...
http://bugs.xfree86.org/attachment.cgi?id=541&action=view
Oki, ma come si applica???
[edit]
Alura, sta notte ho fatto un pò di prove...
Ho provato ad applicare la patch di sopra ma falliva sia sull'xfree-4.3.0-r3 che sul 4.3.99.15.
Allora ho provato ad applicare la patch indicata da tavec all'xfree indicato da tavec, e si applica. L'ho compilato, ho compilato il modulo, indi un riavvio (ho anche cambiato qualcosina al kernel),
| Code: | insmod /usr/tmp/portage/xfree-4.3.99.14/work/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/radeon.o
|
Il modulo si carica correttamente, indi startx, glxinfo e...
No, il 3d hw non è attivo...
Non so se ho fatto bene, ma ho riportato la cosa come bug in http://bugs.xfree86.org...
Non capisco + quale sia il problema...
Mo però se do glxgears nn gira più niente (nel senso che si apre la finestra con le rotelle, ma si richiude in una frazione di secondo...
Mi sa quasi quasi che sto ca**o di portatile mo lo butto giù dalla finestra...
Notare che nelle mie varie prove ho compilato versioni diverse di xfree almeno 3 volte, mo ke sono arrivate le 6 e mezza mi sa che /me va a dormire...
_________________
registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
