Ralink 3070 kernel 4.10.x-4.11 link is not ready (ARCH=arm)

[n05ph3r42]

Hi all,
I made a rootfs for PAZ00 (tegra2 soc), and got issue with wifi (ralink 3070):
IPv6 ADDRVONF(NETDEV_UP) wlan0: link is not ready

Dmesg is here https://paste.pound-python.org/show/vS4uExSqj1atGAZ3qnq3/

lsmod:

rt2800usb
rt2x00usb
rt2800lib
rty2x00lib
cdc_ether
dm9601
usbnet
mii
btusb
btintel

rc-status says NetworkManager is inactive, but usb-network ethernet (dm9601) works fine.
ifconfig shows ralink card w/o IP, while dm9601 have IP.

Any ideas?

[n05ph3r42]

Also i tried to scan AP's with wpa_supplicant via wlan0. It say's "network not found". Gonna try to remove networkmanager at all, and retry with wpa_supplicant only.