| View previous topic :: View next topic |
| Author |
Message |
bandreabis
Advocate
Joined: 18 Feb 2005
Posts: 2495
Location: イタリアのロディで
|
 Posted: Mon Dec 04, 2017 10:49 am Post subject: Crash SSD durante la compilazione |
 |
|
Ciao a tutti.
Ieri mi è venuto un colpo.
notebook di un anno con Gentoo su SSD. Mentre compilava si è bloccato il PC e ha dato un errore di disco.
Non ho preso purtroppo nota.
Ho installato e fatto partire smartmontools che mi ha dato:
| Quote: | smartctl --all /dev/sda
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.12.12-gentoo] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD8SNAT-128G-1006
Serial Number: 161828445468
LU WWN Device Id: 5 001b44 4a4b52a34
Firmware Version: Z2311006
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 4 11:19:53 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 217
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 287
171 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0033 100 100 005 Pre-fail Always - 27
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 60
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 2
194 Temperature_Celsius 0x0022 064 044 000 Old_age Always - 36 (Min/Max 0/56)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 3
230 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 258
244 Unknown_Attribute 0x0032 000 100 000 Old_age Always - 0
SMART Error Log Version: 255
Warning: ATA error count 65535 inconsistent with error log pointer 3
ATA Error Count: 65535 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was in a vendor specific state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 65534 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was in a vendor specific state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 65533 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was in a vendor specific state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 65532 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was in a vendor specific state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 65531 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA
b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 50% 37 -
# 2 Short offline Aborted by host 50% 37 -
Selective Self-tests/Logging not supported
|
EDIT: ho fatto il test "Shirt offline" ed è passato senza errori.
| Quote: | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 217 -
# 2 Short offline Aborted by host 50% 37 -
# 3 Short offline Aborted by host 50% 37 -
|
Per compilare uso tmpfs (spero) come dovrebbe vedersi con
| mount wrote: | mount
/dev/sda2 on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,nosuid,relatime,size=10240k,nr_inodes=2039397,mode=755)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run type tmpfs (rw,nodev,relatime,size=1638384k,mode=755)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (ro,relatime)
cgroup_root on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755)
openrc on /sys/fs/cgroup/openrc type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/lib64/rc/sh/cgroup-release-agent.sh,name=openrc)
none on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cpuset on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cpu on /sys/fs/cgroup/cpu type cgroup (rw,nosuid,nodev,noexec,relatime,cpu)
cpuacct on /sys/fs/cgroup/cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct)
freezer on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
rdma on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cachedir on /lib64/splash/cache type tmpfs (rw,nosuid,nodev,noexec,noatime,size=4096k,mode=755)
/dev/sda1 on /boot/efi type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb4 on /documenti type xfs (rw,relatime,attr2,inode64,noquota)
/dev/sda3 on /home type ext4 (rw,relatime,data=ordered)
tmpfs on /tmp type tmpfs (rw,noatime,size=12582912k)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
none on /run/user/1000 type tmpfs (rw,relatime,mode=700,uid=1000)
|
Ditemi voi se mi devo preoccupare. Il PC ha un anno ma so anche che adata non è la miglior marca di SSD.
EDIT: che poi in realtà è un SSD della Sandisk?
Grazie per il vostro aiuto.
Andrea
_________________
Il numero di post non fa di me un esperto! Anzi! |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31326
Location: here
|
| Posted: Mon Dec 04, 2017 11:36 am Post subject: |
|
|
Non saprei dirti per l'output di smartctl, non ne so abbastanza.
Posso solo dirti che non mi pare usi tmpfs per la compilazione, infatti dovresti vedere qualcosa del genere con mount
| Code: | | tmpfs on /var/tmp/portage type tmpfs (rw,noatime,size=10485760k,mode=775,uid=250,gid=250) |
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
bandreabis
Advocate
Joined: 18 Feb 2005
Posts: 2495
Location: イタリアのロディで
|
| Posted: Mon Dec 04, 2017 11:41 am Post subject: |
|
|
Grazie del tuo aiuto.
| fedeliallalinea wrote: | Non saprei dirti per l'output di smartctl, non ne so abbastanza.
Posso solo dirti che non mi pare usi tmpfs per la compilazione, infatti dovresti vedere qualcosa del genere con mount
| Code: | | tmpfs on /var/tmp/portage type tmpfs (rw,noatime,size=10485760k,mode=775,uid=250,gid=250) |
|
nemmeno tmpfs on /tmp type tmpfs (rw,noatime,size=12582912k) ?
| emerge --info wrote: |
emerge --info
Portage 2.3.13 (python 3.5.4-final-0, default/linux/amd64/17.0/desktop/plasma, gcc-6.4.0, glibc-2.25-r9, 4.12.12-gentoo x86_64)
=================================================================
System uname: Linux-4.12.12-gentoo-x86_64-Intel-R-_Core-TM-_i7-6700HQ_CPU_@_2.60GHz-with-gentoo-2.4.1
KiB Mem: 16383828 total, 10409336 free
KiB Swap: 0 total, 0 free
Timestamp of repository gentoo: Sun, 03 Dec 2017 21:00:01 +0000
Head commit of repository gentoo: 4f5dc96976aaa97d86ad6f3937724d96413fcedb
sh bash 4.3_p48-r1
ld GNU ld (Gentoo 2.29.1 p3) 2.29.1
app-shells/bash: 4.3_p48-r1::gentoo
dev-java/java-config: 2.2.0-r3::gentoo
dev-lang/perl: 5.24.3::gentoo
dev-lang/python: 2.7.14::gentoo, 3.5.4::gentoo
dev-util/cmake: 3.8.2::gentoo
dev-util/pkgconfig: 0.29.2::gentoo
sys-apps/baselayout: 2.4.1-r2::gentoo
sys-apps/openrc: 0.34.11::gentoo
sys-apps/sandbox: 2.10-r4::gentoo
sys-devel/autoconf: 2.13::gentoo, 2.69::gentoo
sys-devel/automake: 1.11.6-r2::gentoo, 1.15.1-r1::gentoo
sys-devel/binutils: 2.29.1-r1::gentoo
sys-devel/gcc: 6.4.0::gentoo
sys-devel/gcc-config: 1.8-r1::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers)
sys-libs/glibc: 2.25-r9::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-extra-opts:
OverlayLocale
location: /usr/local/portage
masters: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=broadwell -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/sddm/scripts/Xsetup /usr/share/themes/oxygen-gtk/gtk-2.0"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo"
CXXFLAGS="-march=broadwell -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--jobs=8 --load-average=8"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync multilib-strict news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="it_IT.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j9 -l8"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/tmp"
USE="X a52 aac acl acpi activities alsa amd64 berkdb bluetooth branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups cxx dbus declarative dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif glamor gpm gtk iconv ipv6 jpeg kde kipi kwallet lcms ldap libnotify mad mng modules mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf phonon plasma png policykit ppds qml qt3support qt5 readline sdl seccomp semantic-desktop session spell ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb vaapi vorbis widgets wxwidgets x264 xattr xcb xcomposite xinerama xml xv xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="sse sse2 sse3 sse4_1 sse4_2 ssse3 mmxext mmx" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64" INPUT_DEVICES="synaptics evdev" KERNEL="linux" L10N="it ja" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="nlpsolver pdfimport presenter-console presenter-minimizer" LINGUAS="it ja en" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6 php7-0" POSTGRES_TARGETS="postgres9_5" PYTHON_SINGLE_TARGET="python3_5" PYTHON_TARGETS="python2_7 python3_5" RUBY_TARGETS="ruby22" USERLAND="GNU" VIDEO_CARDS="intel i965 nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
_________________
Il numero di post non fa di me un esperto! Anzi! |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31326
Location: here
|
| Posted: Mon Dec 04, 2017 11:44 am Post subject: |
|
|
No allora ce l'hai visto che la tua PORTAGE_TMPDIR punta a /tmp. Scusa davo per scontato che avessi l'impostazione di default
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
bandreabis
Advocate
Joined: 18 Feb 2005
Posts: 2495
Location: イタリアのロディで
|
| Posted: Mon Dec 04, 2017 11:48 am Post subject: |
|
|
| fedeliallalinea wrote: | | No allora ce l'hai visto che la tua PORTAGE_TMPDIR punta a /tmp. Scusa davo per scontato che avessi l'impostazione di default |
Mi hai fatto sudare freddo 
Grazie per la rassicurazione.
_________________
Il numero di post non fa di me un esperto! Anzi! |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1040
|
| Posted: Mon Dec 04, 2017 9:31 pm Post subject: |
|
|
probabilmente ha riempito la /tmp in compilazione e qualche file utilizzato dal sistema in /tmp non ha trovato spazio 
potrebbe aumentare la dimensione di /tmp o spostare la tmp di portage altrove sempre in RAM
_________________
LRS 64/32 |
|
| Back to top |
|
|
bandreabis
Advocate
Joined: 18 Feb 2005
Posts: 2495
Location: イタリアのロディで
|
| Posted: Tue Dec 05, 2017 8:27 am Post subject: |
|
|
Non a caso è accaduto durante un emerge -e world
Speriamo bene.
Ma non c'è modo di liberare memoria dopo l'installazione di ogni pacchetto?
Non ho mai avuto questo problema con nessun pacchetto preso singolarmente.
Grazie
_________________
Il numero di post non fa di me un esperto! Anzi! |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31326
Location: here
|
| Posted: Tue Dec 05, 2017 8:54 am Post subject: |
|
|
| bandreabis wrote: | | Ma non c'è modo di liberare memoria dopo l'installazione di ogni pacchetto? |
Dovrebbe gia' farlo emerge ogni volta che completa un'installazione
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
bandreabis
Advocate
Joined: 18 Feb 2005
Posts: 2495
Location: イタリアのロディで
|
| Posted: Tue Dec 05, 2017 9:07 am Post subject: |
|
|
É quello che credevo anche io.
Quindi potrebbe non essere così semplice la situazione.
_________________
Il numero di post non fa di me un esperto! Anzi! |
|
| Back to top |
|
|
xdarma
l33t
Joined: 08 Dec 2003
Posts: 720
Location: tra veneto e friuli (italy)
|
| Posted: Sat Dec 09, 2017 8:44 pm Post subject: Re: Crash SSD durante la compilazione |
|
|
| bandreabis wrote: |
| Quote: |
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 217
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 287
[...cut...]
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 3
[...cut...]
Error 65535 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
|
|
L'età del disco è discordante, ma presumo sia corretto il valore di 217 ore.
Può essere vero che lo hai acceso 287 volte? Mediamente, rimarrebbe acceso circa 45minuti per volta. Può essere giusto?
I tre errori UDMA segnalati, alle volte dipendono dal cavo di collegamento SATA, ma il tuo è un portatile che non dovrebbe avere cavi.
In sostanza, ti converrebbe cercare informazioni presso il produttore per capire a cosa si riferiscono i vari codici SMART perché smartmontools usa delle definizioni standard che non sembrano adatte al tuo disco e quindi risultano inutili e/o fuorvianti.
_________________
proud user of faKeDE-4.7.3 -> back to windowmaker -> moved to LXQt |
|
| Back to top |
|
|
sabayonino
Veteran
Joined: 03 Jan 2012
Posts: 1040
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian) 
