View previous topic :: View next topic |
Author |
Message |
Fog_Watch Apprentice
Joined: 24 Jul 2006 Posts: 268 Location: Utility Muffin Research Kitchen
|
Posted: Fri Dec 14, 2018 7:44 am Post subject: How to get DAHDI working with kernel 4.19 |
|
|
UPDATE
Following on:
Code: | # uname -r
4.19.57-gentoo |
Code: | cd /tmp
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1.tar.gz
tar -xf dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1.tar.gz
cd dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1/linux/
mkdir drivers/staging
cp -fR /usr/src/linux/drivers/misc/echo drivers/staging
sed -i "s|#obj-m += dahdi_echocan_oslec.o|obj-m += dahdi_echocan_oslec.o|" drivers/dahdi/Kbuild
sed -i "s|#obj-m += ../staging/echo/|obj-m += ../staging/echo/|" drivers/dahdi/Kbuild
echo 'obj-m += echo.o' > drivers/staging/echo/Kbuild
|
I could not build 3.1.
drivers/dahdi/wctdm.c was missing, which was needed for my TDM400P.
So I downloaded the old version:
Code: | cd /tmp
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1.tar.gz
tar -xf dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1.tar.gz
cp dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1/linux/drivers/dahdi/wctdm.c dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1/linux/drivers/dahdi/ |
And added in the required lines:
Code: | # grep DAHDI_WCTDM dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1/linux/drivers/dahdi/{Kconfig,Kbuild}
Kconfig:config DAHDI_WCTDM
Kconfig:config DAHDI_WCTDM24XXP
Kbuild:obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM) += wctdm.o
Kbuild:obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM24XXP) += wctdm24xxp/
|
I could then
Code: | cd /tmp/dahdi-linux-complete-3.0.0-rc1+3.0.0-rc1/linux
make
make install
reboot |
Code: | # lsmod | grep -E 'oslec|dahdi'
dahdi_echocan_oslec 16384 2
echo 16384 1 dahdi_echocan_oslec
dahdi 221184 4 wctdm,dahdi_echocan_oslec
crc_ccitt 16384 1 dahdi
|
Last edited by Fog_Watch on Fri Nov 29, 2019 5:19 am; edited 1 time in total |
|
Back to top |
|
|
jcandle n00b
Joined: 19 Nov 2019 Posts: 1
|
Posted: Tue Nov 19, 2019 3:03 am Post subject: |
|
|
I'm going to res this old thread only because somebody will find this useful and there's no other place on the webs that I could find anyone posting this.
To make wctdm working with DAHDI 3.1.0 the following changes need to be made in addition to the changes posted by @Fog_Watch
file: wctdm.c
line: 1135
< DAHDI_IRQ_HANDLER(wctdm_interrupt)
> static irqreturn_t wctdm_interrupt(int irq, void *dev_id)
line: 2853
< res = dahdi_pci_module(&wctdm_driver);
> res = pci_register_driver(&wctdm_driver); |
|
Back to top |
|
|
Fog_Watch Apprentice
Joined: 24 Jul 2006 Posts: 268 Location: Utility Muffin Research Kitchen
|
Posted: Fri Nov 29, 2019 5:14 am Post subject: |
|
|
Code: | # uname -r
4.19.82-gentoo
|
Code: | cd /tmp/
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-3.1.0+3.1.0.tar.gz
tar -xf dahdi-linux-complete-3.1.0+3.1.0.tar.gz
cd dahdi-linux-complete-3.1.0+3.1.0/linux
mkdir drivers/staging
cp -fR /usr/src/linux/drivers/misc/echo drivers/staging
sed -i "s|#obj-m += dahdi_echocan_oslec.o|obj-m += dahdi_echocan_oslec.o|" drivers/dahdi/Kbuild
sed -i "s|#obj-m += ../staging/echo/|obj-m += ../staging/echo/|" drivers/dahdi/Kbuild
echo 'obj-m += echo.o' > drivers/staging/echo/Kbuild
|
Include wctdm.c:
Code: | cd /tmp
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1.tar.gz
tar -xf dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1.tar.gz
cp dahdi-linux-complete-2.11.1-rc1+2.11.1-rc1/linux/drivers/dahdi/wctdm.c dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/
|
Code: | # grep DAHDI_WCTDM dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/{Kconfig,Kbuild}
dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/Kconfig:config DAHDI_WCTDM
dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/Kconfig:config DAHDI_WCTDM24XXP
dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/Kbuild:obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM) += wctdm.o
dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/Kbuild:obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM24XXP) += wctdm24xxp/
|
Edit wctdm.c:
Code: | cd dahdi-linux-complete-3.1.0+3.1.0/linux/drivers/dahdi/
# sed -n -e 1135p -e 2852p wctdm.c
static irqreturn_t wctdm_interrupt(int irq, void *dev_id)
res = pci_register_driver(&wctdm_driver);
|
Build:
Code: | cd /tmp/dahdi-linux-complete-3.1.0+3.1.0/linux/
make
make install
reboot
|
Code: | hostname ~ # asterisk -rx "dahdi show version"
DAHDI Version: 3.1.0 Echo Canceller: OSLEC
|
|
|
Back to top |
|
|
ajorians n00b
Joined: 27 Mar 2020 Posts: 1
|
Posted: Fri Mar 27, 2020 8:28 pm Post subject: Thanks! |
|
|
This all helped me! I am OpenSuse and hit the issues where the TDM400P is no longer supported with DAHDI 3. So I made the changes you all supplied, built and installed the drivers and all worked. So thanks again. |
|
Back to top |
|
|
Fog_Watch Apprentice
Joined: 24 Jul 2006 Posts: 268 Location: Utility Muffin Research Kitchen
|
Posted: Mon May 25, 2020 9:28 am Post subject: |
|
|
The above works for 5.4. In addition the following change is needed.
file: tmp/dahdi-linux-complete-3.1.0+3.1.0/linux/include/dahdi/kernel.h
line: 62
< #include <linux/pci-aspm.h>
> #include <linux/pci.h>
Code: | # uname -r
5.4.38-gentoo
|
Code: | # asterisk -rx "dahdi show version"
DAHDI Version: 3.1.0 Echo Canceller: OSLEC
|
|
|
Back to top |
|
|
Hyper_Eye Guru
Joined: 17 Aug 2003 Posts: 463 Location: Huntsville, AL.
|
|
Back to top |
|
|
Fog_Watch Apprentice
Joined: 24 Jul 2006 Posts: 268 Location: Utility Muffin Research Kitchen
|
Posted: Thu Apr 22, 2021 6:32 am Post subject: |
|
|
This works with 5.4.97. With kernel 5.10.27 the ebuild ends in error 2. Ahh. |
|
Back to top |
|
|
kalgonite n00b
Joined: 27 Aug 2021 Posts: 4
|
Posted: Fri Aug 27, 2021 10:26 am Post subject: |
|
|
Fog_Watch wrote: | This works with 5.4.97. With kernel 5.10.27 the ebuild ends in error 2. Ahh. |
Same frustrating problem here on 5.10.
Not really being into kernel headers and such, the only thing I could find is that a specific function, file_operations, seems to have been replaced by proc_ops: https://lore.kernel.org/linux-fsdevel/20191225172228.GA13378@avx2/
I've tried making changes accordingly on dahdi-base.c, but it really requires some more expertise to get something working out of it.. _________________ My shell is case sensitive |
|
Back to top |
|
|
Hu Administrator
Joined: 06 Mar 2007 Posts: 22861
|
Posted: Fri Aug 27, 2021 3:59 pm Post subject: |
|
|
The pastebin link from Fog_Watch has long since expired, and no one quoted the error messages it contained. Without those errors, anyone who wants to help you would first need to set up an environment to reproduce those errors. |
|
Back to top |
|
|
kalgonite n00b
Joined: 27 Aug 2021 Posts: 4
|
Posted: Fri Aug 27, 2021 4:11 pm Post subject: |
|
|
Hu wrote: | The pastebin link from Fog_Watch has long since expired, and no one quoted the error messages it contained. Without those errors, anyone who wants to help you would first need to set up an environment to reproduce those errors. |
I believe that the error isn't related specifically to gentoo's ebuild system, it depends on a kernel function change, to which I'm desperately trying to find a solution.
The same error is reproducible on different distros using the vanilla make procedure. _________________ My shell is case sensitive |
|
Back to top |
|
|
Hu Administrator
Joined: 06 Mar 2007 Posts: 22861
|
Posted: Fri Aug 27, 2021 4:51 pm Post subject: |
|
|
There may be people who could tell you how to fix it, but who have no interest in setting up to build DAHDI just to find out how it is broken. If you post the errors you get, someone might be able to tell you what to do. As is, all we know is that if we set up to build DAHDI, we will (probably) get the errors you saw. |
|
Back to top |
|
|
Fog_Watch Apprentice
Joined: 24 Jul 2006 Posts: 268 Location: Utility Muffin Research Kitchen
|
Posted: Fri Aug 27, 2021 11:16 pm Post subject: |
|
|
After 15 years of sterling service my OpenVox A400P11 has gone to meet its maker. So unfortunately this thread is no longer relevant to me.
With respect to pastebin links though, Hu, I hear you.
Last edited by Fog_Watch on Sat Aug 28, 2021 4:35 am; edited 1 time in total |
|
Back to top |
|
|
Hu Administrator
Joined: 06 Mar 2007 Posts: 22861
|
Posted: Sat Aug 28, 2021 12:42 am Post subject: |
|
|
Fog_Watch wrote: | After 15 years of sterling service my OpenVox A400P11 has gone to meet its maker. | Securing an RMA after 15 years is impressive. Few things enjoy such a long warranty. Fog_Watch wrote: | With respect to pastebin links though, Hu, I hear you. | To be clear, I was trying to encourage kalgonite to provide the errors seen on a modern kernel. I don't mind that your last paste is long gone, since we currently don't even know if your errors are the same as the ones kalgonite is encountering. |
|
Back to top |
|
|
Hyper_Eye Guru
Joined: 17 Aug 2003 Posts: 463 Location: Huntsville, AL.
|
Posted: Sat Aug 28, 2021 5:26 am Post subject: |
|
|
Fog_Watch wrote: | This works with 5.4.97. With kernel 5.10.27 the ebuild ends in error 2. Ahh. |
kalgonite wrote: | Same frustrating problem here on 5.10.
Not really being into kernel headers and such, the only thing I could find is that a specific function, file_operations, seems to have been replaced by proc_ops: https://lore.kernel.org/linux-fsdevel/20191225172228.GA13378@avx2/
I've tried making changes accordingly on dahdi-base.c, but it really requires some more expertise to get something working out of it.. |
I updated my overlay with dahdi-3.1.0-r3.ebuild. I did not have to change the patch for the legacy modules. This is building without error for me with kernel 5.10.52. https://github.com/HyperEye/dahdi_legacy
Enable it with eselect-repository:
eselect repository add dahdi_legacy git https://github.com/HyperEye/dahdi_legacy
emerge --sync
emerge -av net-misc/dahdi::dahdi_legacy _________________ Gentoo Gaming Videos |
|
Back to top |
|
|
kalgonite n00b
Joined: 27 Aug 2021 Posts: 4
|
Posted: Wed Sep 01, 2021 11:18 am Post subject: |
|
|
Using the last patchset I could successfully compile and finally resume my TDM400P card (using the obsoleted wctdm driver).
The error 2 I encountered during dahdi_tools compilation was the following:
Code: |
make[3]: Entering directory '/usr/src/dahdi-tools-3.1.0/xpp'
CCLD astribank_tool
/usr/bin/ld: ./.libs/libastribank.a(libxtalk_la-xtalk_sync.o):/usr/src/dahdi-tools-3.1.0/xpp/xtalk/xtalk_sync.c:63: multiple definition of `members'; ./.libs/libastribank.a(libastribank_la-mpptalk.o):/usr/src/dahdi-tools-3.1.0/xpp/mpptalk.c:240: first defined here
|
I had to add the following rule on debian to compile dahdi_tools:
Code: | export DEB_LDFLAGS_MAINT_APPEND="-Wl,--allow-multiple-definition" |
I suppose this could work on gentoo, if needed:
Code: | append-ldflags -Wl,--allow-multiple-definition |
Thanks again and have a nice day! _________________ My shell is case sensitive |
|
Back to top |
|
|
Hu Administrator
Joined: 06 Mar 2007 Posts: 22861
|
Posted: Wed Sep 01, 2021 6:41 pm Post subject: |
|
|
While that will allow the compile to succeed, multiple definitions are an error by default for good reason. In this case, are both definitions equivalent in their size, content, and const-ness? Does either file assume it is the sole user of that symbol? If not, the resulting code may misbehave at runtime. |
|
Back to top |
|
|
kalgonite n00b
Joined: 27 Aug 2021 Posts: 4
|
Posted: Wed Sep 01, 2021 11:44 pm Post subject: |
|
|
Hu wrote: | While that will allow the compile to succeed, multiple definitions are an error by default for good reason. In this case, are both definitions equivalent in their size, content, and const-ness? Does either file assume it is the sole user of that symbol? If not, the resulting code may misbehave at runtime. |
You are right in pointing this out, Hu.
The portion of code seems to concern a specific tool to control a subset of USB VoIP devices, called Astribank, produced by Xorcom.
This is what I could quickly find about:
I think it's reasonable to believe that possible exceptions with this compilation (as in the variable duplication/scope error ignored with the additional flag posted in my last message) could appear when executing that specific tool, so my layman's conclusion would be against suggesting its use when having a USB device requiring astribank_tool to drive it.
Unfortunately I can't go further than this without real world testing or having additional knowledge about the toolset's source and dahdi's common interfaces.
Ensuring there aren't additional passed exceptions behind the next corner would get me into a fix, so to speak. _________________ My shell is case sensitive |
|
Back to top |
|
|
|