| View previous topic :: View next topic |
| Author |
Message |
incubator
Guru
Joined: 05 Jun 2003
Posts: 584
Location: Belgium
|
 Posted: Sat Nov 22, 2003 8:42 pm Post subject: xawtv segfaulted |
 |
|
When I run xawtv I receive a segmentation fault, bur I have no idea wether it is a hardware or software issue.
Memtest says my memory is clean and this is the output I get from xawtv -debug 2:
| Code: |
This is xawtv-3.86, running on Linux/i686 (2.4.20-gentoo-r7)
visual: id=0x21 class=4 (TrueColor), depth=24
visual: id=0x22 class=5 (DirectColor), depth=24
visual: id=0x23 class=4 (TrueColor), depth=24
visual: id=0x24 class=4 (TrueColor), depth=24
visual: id=0x25 class=4 (TrueColor), depth=24
visual: id=0x26 class=4 (TrueColor), depth=24
visual: id=0x27 class=4 (TrueColor), depth=24
visual: id=0x28 class=4 (TrueColor), depth=24
visual: id=0x29 class=4 (TrueColor), depth=24
visual: id=0x2a class=4 (TrueColor), depth=24
visual: id=0x2b class=4 (TrueColor), depth=24
visual: id=0x2c class=4 (TrueColor), depth=24
visual: id=0x2d class=4 (TrueColor), depth=24
visual: id=0x2e class=5 (DirectColor), depth=24
visual: id=0x2f class=5 (DirectColor), depth=24
visual: id=0x30 class=5 (DirectColor), depth=24
visual: id=0x31 class=5 (DirectColor), depth=24
visual: id=0x32 class=5 (DirectColor), depth=24
visual: id=0x33 class=5 (DirectColor), depth=24
visual: id=0x34 class=5 (DirectColor), depth=24
visual: id=0x35 class=5 (DirectColor), depth=24
visual: id=0x36 class=5 (DirectColor), depth=24
visual: id=0x37 class=5 (DirectColor), depth=24
visual: id=0x38 class=5 (DirectColor), depth=24
x11: color depth: 24 bits, 3 bytes - pixmap: 4 bytes
x11: color masks: red=0x00ff0000 green=0x0000ff00 blue=0x000000ff
x11: server byte order: little endian
x11: client byte order: little endian
check if the X-Server is local ... **** ok
x11 socket: me=localhost, server=localhost
main: dga extention...
main: xinerama extention...
main: xvideo extention [video]...
Xvideo: 3 adaptors available.
Xvideo: NV10 Video Overlay: input image, ports 105-105
Xvideo: NV05 Video Blitter: input image, ports 106-137
Xvideo: NVIDIA Video Interface Port: input video, ports 138-138
Xvideo: using port 138 for video
XV_ENCODING get set, 0 -> 1
XV_COLORKEY get set, 0 -> 16777215
XV_AUTOPAINT_COLORKEY get set, 0 -> 1
XV_SET_DEFAULTS set, 0 -> 0
XV_BRIGHTNESS get set, -512 -> 511
XV_CONTRAST get set, 0 -> 8191
XV_SATURATION get set, 0 -> 8191
XV_HUE get set, 0 -> 360
XV_ITURBT_709 get set, 0 -> 1
main: xvideo extention [image]...
image format list for port 105
0x32595559 (YUY2) packed [ok: 16 bit YUV 4:2:2 (packed, YUYV)]
0x32315659 (YV12) planar
0x59565955 (UYVY) packed [ok: 16 bit YUV 4:2:2 (packed, UYVY)]
0x30323449 (I420) planar [ok: 12 bit YUV 4:2:0 (planar)]
main: init main window...
main: install signal handlers...
main thread [pid=5944]
main: checking wm...
wm cap: _NET_WM_STATE
wm cap: _NET_WM_STATE_STICKY
wm cap: _NET_WM_STATE_SHADED
wm cap: _NET_WM_DESKTOP
wm cap: _NET_CLIENT_LIST
wm cap: _NET_NUMBER_OF_DESKTOPS
wm cap: _NET_CURRENT_DESKTOP
wm cap: _NET_ACTIVE_WINDOW
wm cap: _NET_CLOSE_WINDOW
wm cap: _NET_MOVERESIZE_WINDOW
wm cap: _NET_DESKTOP_NAMES
wm cap: _NET_SUPPORTING_WM_CHECK
wm cap: _NET_WM_STATE
wm cap: _NET_WM_STATE_STICKY
wm cap: _NET_WM_STATE_SHADED
wm cap: _NET_WM_DESKTOP
wm cap: _NET_CLIENT_LIST
wm cap: _NET_NUMBER_OF_DESKTOPS
wm cap: _NET_CURRENT_DESKTOP
wm cap: _NET_ACTIVE_WINDOW
wm cap: _NET_CLOSE_WINDOW
wm cap: _NET_MOVERESIZE_WINDOW
wm cap: _NET_DESKTOP_NAMES
wm cap: _NET_SUPPORTING_WM_CHECK
wm cap: _NET_WM_STATE
wm cap: _NET_WM_STATE_STICKY
wm cap: _NET_WM_STATE_SHADED
wm cap: _NET_WM_DESKTOP
wm cap: _NET_CLIENT_LIST
wm cap: _NET_NUMBER_OF_DESKTOPS
wm cap: _NET_CURRENT_DESKTOP
wm cap: _NET_ACTIVE_WINDOW
wm cap: _NET_CLOSE_WINDOW
wm cap: _NET_MOVERESIZE_WINDOW
wm cap: _NET_DESKTOP_NAMES
wm cap: _NET_SUPPORTING_WM_CHECK
main: creating windows ...
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
main: init frequency tables ...
freq: reading /usr/share/xawtv/Index.map
main: read config file ...
main: checking for vidmode extention ...
main: checking for lirc ...
lirc: not enabled at compile time
main: checking for joystick ...
main: checking for midi ...
main: adding kbd hooks ...
main: mapping main window ...
xt: pointer show
main: initialize hardware ...
xv: get XV_BRIGHTNESS: 0
xv: get XV_CONTRAST: 4096
xv: get XV_SATURATION: 4096
xv: get XV_HUE: 0
[pid=5944] segfault catched, aborting
Aborted
|
for your information here is the output of dmesg:
| Code: |
Linux version 2.4.20-gentoo-r7 (root@homeworld) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #17 SMP Wed Nov 5 19:52:37 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000fa290
ACPI: RSDT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0030
ACPI: DSDT (v001 SiS 735 00000.00256) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=linux ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1526.928 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3047.42 BogoMIPS
Memory: 511036k/524224k available (2460k kernel code, 10624k reserved, -2964k data, 136k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) XP 1800+ stepping 02
per-CPU timeslice cutoff: 731.80 usecs.
task migration cache decay timeout: 5 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1526.3955 MHz.
..... host bus clock speed is 265.2644 MHz.
cpu: 0, clocks: 1327644, slice: 663822
CPU0<T0:1327632,T1:663808,D:2,S:663822,C:1327644>
migration_task 0 on cpu=0
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.4a [Flags: R/O].
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
i2c-core.o: i2c core module version 2.7.0 (20021208)
i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208)
i2c-pport.o: i2c Primitive parallel port adapter module version 2.7.0 (20021208)
i2c-proc.o version 2.7.0 (20021208)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS735
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 6L020J1, ATA DISK drive
hdb: ST3120023A, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive
hdd: IDE/ATAPI CD-ROM 50XS, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c01cd224, I/O limit 4095Mb (mask 0xffffffff)
hda: 40132503 sectors (20548 MB) w/1819KiB Cache, CHS=2498/255/63, UDMA(100)
blk: queue c01cd374, I/O limit 4095Mb (mask 0xffffffff)
hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
/dev/ide/host0/bus0/target1/lun0: [PTBL] [14593/255/63] p1 < p5 > p2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Linux video capture interface: v1.00
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
Mediavision Pro Movie Studio driver 0.02
PMS type is 0
Board not found.
bttv: driver version 0.7.106 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0f.0, irq: 5, latency: 64, mmio: 0xcddfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
i2c-dev.o: Registered 'bt848 #0' as minor 0
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tvmixer: debug: (tuner unset)
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=25 tuner=1 radio=no stereo=no
bttv0: using tuner=1
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected SiS 735 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on SiS @ 0xd0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on SiS @ 0xd0000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
es1371: version v0.30 time 19:55:43 Nov 5 2003
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xdc00 irq 11
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: v9(SigmaTel STAC9721/23)
btaudio: driver version 0.7 loaded [digital+analog]
btaudio: Bt878 (rev 17) at 00:0f.1, irq: 5, latency: 64, mmio: 0xcddff000
btaudio: using card config "default"
btaudio: registered device dsp2 [digital]
btaudio: registered device dsp3 [analog]
btaudio: registered device mixer1
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:55:56 Nov 5 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-ohci.c: USB OHCI at membase 0xe0834000, IRQ 10
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe0836000, IRQ 5
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
i2c-core.o: i2c core module version 2.7.0 (20021208)
i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
devfs_mk_dir(i2c): using old entry in dir: c25195c0 ""
i2c-pport.o: i2c Primitive parallel port adapter module version 2.7.0 (20021208)
i2c-proc.o version 2.7.0 (20021208)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
FAT: bogus logical sector size 0
hub.c: new USB device 00:13.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x915/0xac82) is not claimed by any active driver.
hub.c: new USB device 00:13.0-2, assigned address 3
hub.c: USB hub found
hub.c: 4 ports detected
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
hub.c: new USB device 00:13.0-2.4, assigned address 4
usb-uhci.c: interrupt, status 3, frame# 1659
input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb2:4.0
Adding Swap: 594396k swap-space (priority -1)
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
ide-cd: ignoring drive hdc
ide-cd: ignoring drive hdd
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Vendor: ATAPI Model: CD-ROM 50X Rev: 185D
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 8x/11x cd/rw xa/form2 cdda tray
spurious 8259A interrupt: IRQ7.
lp0: using parport0 (polling).
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 324 bytes per conntrack
HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
N_HDLC line discipline registered.
|
I also tried re-emerging, unemerging and emerging it again, but to no avail  |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54793
Location: 56N 3W
|
| Posted: Sat Nov 22, 2003 11:38 pm Post subject: |
|
|
incubator,
xawtv expectes to find your Video for Linux device at /dev/video0.
Gentoo puts a symbolic link there but xawtv chokes on it.
When your video device has been detected, you should find that /dev/v4l/video0 exists. Tell xawtv about it with | Code: | | xawtv -c /dev/v4l/video0 |
xawtv -h (or is it --help) will tell you a lot more. man xawtv is good to.
Regards,
NeddySeagoon
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
alex-b
n00b
Joined: 29 Jul 2003
Posts: 37
|
| Posted: Sun Nov 23, 2003 3:14 am Post subject: |
|
|
I had exactly the same error, seems like the xv extension is busting your balls.
xawtv -noxv to fix this "issue" |
|
| Back to top |
|
|
incubator
Guru
Joined: 05 Jun 2003
Posts: 584
Location: Belgium
|
| Posted: Mon Nov 24, 2003 5:57 pm Post subject: |
|
|
that fixed it indeed 
however now I still get no image (app starts, I hear sound, but cannot watch tv)
xawtv returns this output:
| Code: |
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
ioctl: VIDIOCCAPTURE(int=1): Invalid argument
ioctl: VIDIOCCAPTURE(int=0): Invalid argument
ioctl: VIDIOCCAPTURE(int=1): Invalid argument
|
edit: fixed now, seems xf86config has an optional thing to disable dga, now I can finally watch tv  |
|
| Back to top |
|
|
kwiqsilver
Guru
Joined: 19 Mar 2003
Posts: 360
|
| Posted: Mon Nov 24, 2003 7:15 pm Post subject: |
|
|
I had the same problem so being lazy, I switched from xawtv to tvtime.
It is so much better. I definitely recommend you try it out. The controls are better (you can get an onscreen brightness, contrast, etc. slider, alter it then save the settings for that channel or for all channels). And the picture on some cable channels that didn't appear too clearly under xawtv are clearer under tvtime. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
