View previous topic :: View next topic |
Author |
Message |
dominik Tux's lil' helper
Joined: 22 Nov 2003 Posts: 84
|
Posted: Wed Dec 03, 2003 6:56 pm Post subject: k3b doesn't start burning |
|
|
i installed k3b with scsi emulation and everything seems to be all right.
it starts without and error and i can buid a project.
i start burning as root and after get the following error after a short while:
Code: | System
-----------------------
K3b Version: 0.9
KDE Version: 3.1.4
QT Version: 3.2.2
cdrecord
-----------------------
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX140E '
Revision : '1.0s'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 4183808 = 4085 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB
Total size: 1 MB (00:05.98) = 449 sectors
Lout start: 1 MB (00:07/74) = 449 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12488 (97:15/37)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 70
Manufacturer: NAN-YA Plastics Corporation
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 355433 Blocks remaining: 354984
Starting to write CD/DVD at speed 1 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
/usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.009s timeout 200s
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 9.431s
/usr/bin/cdrecord: fifo had 15 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=1 -dao -eject -data -tsize=449s -
mkisofs
-----------------------
449
Total translation table size: 0
Total rockridge attributes bytes: 298
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 2000
449 extents written (0 Mb)
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V CDROM -volset -A K3B THE CD KREATOR VERSION 0.9 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.9 -sysid LINUX -volset-size 1 -volset-seqno 1 -r -hide-list /tmp/kde-root/k3breKZxb.tmp -l -iso-level 2 -path-list /tmp/kde-root/k3bIB5eyb.tmp
|
|
|
Back to top |
|
|
trajedi n00b
Joined: 16 Jul 2003 Posts: 73 Location: Dallas
|
Posted: Wed Dec 03, 2003 7:48 pm Post subject: |
|
|
shouldn't this be under the Multimedia category.? |
|
Back to top |
|
|
dominik Tux's lil' helper
Joined: 22 Nov 2003 Posts: 84
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|