| View previous topic :: View next topic |
| Author |
Message |
azgaroth
n00b
Joined: 06 Jul 2003
Posts: 31
|
 Posted: Sat Nov 22, 2003 4:53 pm Post subject: kan geen dep info vinden voor net.eth0 |
 |
|
Hallo
Onlangs heb ik gentoo moeten herinstalleren en nu krijg ik een fout melding
bij het booten, bij het opstarten van mijn netwerk:
| Code: | cardmgr[682]: + * Could not get dependency info for "net.eth0"!
cardmgr[682]: + * Please run:
cardmgr[682]: +
cardmgr[682]: + * # /sbin/depscan.sh
cardmgr[682]: +
cardmgr[682]: + * to fix this.
(bovenstaande wordt 3maal getoont)
cardmgr[682]: + * Bringing eth0 up...
cardmgr[682]: + * Failed to bring eth0 up
cardmgr[682]: +
cardmgr[682]: start cmd exited with status 1 |
Mijn netwerk kaart is ondersteund door pcmcia_cs en heeft vroeger perfect
gewerkt. Ik heb al geprobeert om /sbin/depscan.sh uit
te voeren maar er komt geen verandering. alles is geconfigureerd zoals het
was voordien dus heb ik geen enkel idee meer.
wat is mijn fout.
azgaroth |
|
| Back to top |
|
 |
garo
Bodhisattva
Joined: 15 Jul 2002
Posts: 860
Location: Edegem,BELGIUM
|
| Posted: Sat Nov 22, 2003 11:02 pm Post subject: |
|
|
Gentoo geeft deze foutmelding als de deps van een init script zijn veranderd,
als je dan depscan uitvoert worden de nieuwe deps onthouden.
Aangezien dit bij jou niet werkt zullen de deps fout zijn opgegeven, kan je het bestand "/etc/init.d/net.eth0" is posten ?
_________________
My favorite links this month:
- Surf Random
- Web-based SSH
- Stop Spam |
|
| Back to top |
|
|
azgaroth
n00b
Joined: 06 Jul 2003
Posts: 31
|
| Posted: Wed Nov 26, 2003 12:49 pm Post subject: |
|
|
hallo,
Hier is mijn net.eth0 script
azgaroth
| Code: | #!/sbin/runscript
# Copyright 1999-2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: /home/cvsroot/gentoo-src/rc-scripts/init.d/net.eth0,v 1.31 2003/09/08 00:11:54 azarah Exp $
#NB: Config is in /etc/conf.d/net
# For pcmcia users. note that pcmcia must be added to the same
# runlevel as the net.* script that needs it.
depend() {
use hotplug pcmcia
}
checkconfig() {
if [ -z "${iface_IFACE}" ]
then
eerror "Please make sure that /etc/conf.d/net has \$iface_$IFACE set"
return 1
fi
if [ -n "${vlans}" -a \! -x /sbin/vconfig ]
then
eerror "For VLAN (802.1q) support, emerge net-misc/vconfig"
return 1
fi
}
setup_env() {
# No reason to check these multiple times in the file
iface="${1/\./_}"
iface_IFACE="$(eval echo \$\{iface_${iface}\})"
dhcpcd_IFACE="$(eval echo \$\{dhcpcd_${iface}\})"
inet6_IFACE="$(eval echo \$\{inet6_${iface}\})"
alias_IFACE="$(eval echo \$\{alias_${iface}\})"
status_IFACE="$(ifconfig | gawk -v IFACE="${iface}" '/Link/ { if ($1 == IFACE) print "up" }')"
vlans="$(eval echo \$\{iface_${IFACE}_vlans\})"
}
iface_start() {
local retval=0
setup_env ${1}
checkconfig || return 1
local IFACE="${1}"
ebegin "Bringing ${IFACE} up"
if [ "${iface_IFACE}" != "dhcp" ]
then
/sbin/ifconfig ${IFACE} ${iface_IFACE} >/dev/null || {
retval=$?
eend ${retval} "Failed to bring ${IFACE} up"
return ${retval}
}
# ifconfig do not always return failure ..
/sbin/ifconfig ${IFACE} &> /dev/null || {
retval=$?
eend ${retval} "Failed to bring ${IFACE} up"
return ${retval}
}
else
# Check that eth0 was not brough up by the kernel ...
if [ "${status_IFACE}" != "up" ]
then
/sbin/dhcpcd ${dhcpcd_IFACE} ${IFACE} >/dev/null || {
retval=$?
eend ${retval} "Failed to bring ${IFACE} up"
return ${retval}
}
fi
fi
eend 0
if [ -n "${alias_IFACE}" ]
then
local x=""
local num=0
local aliasbcast=""
local aliasnmask=""
ebegin " Adding aliases"
for x in ${alias_IFACE}
do
aliasbcast="$(eval echo \$\{broadcast_${iface}\} \| awk \'\{ print \$$((num + 1)) \}\')"
if [ -n "${aliasbcast}" ]
then
aliasbcast="broadcast ${aliasbcast}"
fi
aliasnmask="$(eval echo \$\{netmask_${iface}\} \| awk \'\{ print \$$((num + 1)) \}\')"
if [ -n "${aliasnmask}" ]
then
aliasnmask="netmask ${aliasnmask}"
fi
ebegin " ${IFACE}:${num}"
/sbin/ifconfig ${IFACE}:${num} ${x} \
${aliasbcast} ${aliasnmask} >/dev/null
num=$((num + 1))
eend 0
done
save_options "alias" "${alias_IFACE}"
fi
if [ -n "${inet6_IFACE}" ]
then
local x=""
ebegin " Adding inet6 addresses"
for x in ${inet6_IFACE}
do
ebegin " ${IFACE} inet6 add ${x}"
/sbin/ifconfig ${IFACE} inet6 add ${x} >/dev/null
eend 0
done
save_options "inet6" "${inet6_IFACE}"
fi
if [ -n "${gateway}" ] && [ "${gateway%/*}" = "${IFACE}" ]
then
ebegin " Setting default gateway"
# First delete any existing routes if it was setup by kernel ..
/sbin/route del default dev ${gateway%/*} &>/dev/null
/sbin/route add default gw ${gateway#*/} dev ${gateway%/*} \
netmask 0.0.0.0 metric 1 >/dev/null || {
local error=$?
ifconfig ${IFACE} down &>/dev/null
eend ${error} "Failed to bring ${IFACE} up"
stop
return ${error}
}
eend 0
fi
# Enabling rp_filter causes wacky packets to be auto-dropped by
# the kernel. Note that we only do this if it is not set via
# /etc/sysctl.conf ...
if [ -e /proc/sys/net/ipv4/conf/${IFACE}/rp_filter ] && \
[ -z "$(egrep '^[^#]*rp_filter' /etc/sysctl.conf 2>/dev/null)" ]
then
echo 1 > /proc/sys/net/ipv4/conf/${IFACE}/rp_filter
fi
}
iface_stop() {
local myalias="$(get_options alias)"
local myinet6="$(get_options inet6)"
setup_env ${1}
local IFACE="${1}"
ebegin "Bringing ${IFACE} down"
# Also down the inet6 interfaces
if [ -n "${myinet6}" ]
then
local x=""
for x in ${myinet6}
do
/sbin/ifconfig ${IFACE} inet6 del ${x} >/dev/null
done
fi
# Do some cleanup in case the amount of aliases change
if [ -n "${myalias}" ]
then
local x=""
local num=0
for x in ${myalias}
do
/sbin/ifconfig ${IFACE}:${num} down >/dev/null
num=$((num + 1))
done
fi
if [ "${iface_IFACE}" = "dhcp" ]
then
local count=0
while /sbin/dhcpcd -z ${IFACE} &>/dev/null && [ "${count}" -lt 9 ]
do
# Give dhcpcd time to properly shutdown
sleep 1
count=$((count + 1))
done
if [ "${count}" -ge 9 ]
then
eerror "Timed out trying to stop dhcpcd"
fi
else
/sbin/ifconfig ${IFACE} down >/dev/null
fi
eend 0
}
start() {
iface_start ${IFACE} || return 1
for vlan in ${vlans}
do
/sbin/vconfig add ${IFACE} ${vlan} >/dev/null
iface_start ${IFACE}.${vlan}
done
}
stop () {
setup_env ${IFACE}
checkconfig || return 1
for vlan in ${vlans}
do
iface_stop ${IFACE}.${vlan}
/sbin/vconfig rem ${IFACE}.${vlan} >/dev/null
done
iface_stop ${IFACE}
}
# vim:ts=4 |
|
|
| Back to top |
|
|
garo
Bodhisattva
Joined: 15 Jul 2002
Posts: 860
Location: Edegem,BELGIUM
|
| Posted: Wed Nov 26, 2003 2:31 pm Post subject: |
|
|
wat is de uitvoer van deze 2 commando's ?
| Code: | /etc/init.d/pcmcia status
/etc/init.d/hotplug status |
_________________
My favorite links this month:
- Surf Random
- Web-based SSH
- Stop Spam |
|
| Back to top |
|
|
_hesoez_
Tux's lil' helper
Joined: 09 Jun 2003
Posts: 103
Location: Belgium-Duffel/Leuven
|
| Posted: Wed Nov 26, 2003 6:16 pm Post subject: |
|
|
ik had hetzelfde probleem,
gewoon pcmcia en net.eth0 in dezelfde runlevel zetten(bv boot)
bij stond pcmcia in boot en net.eth0 in default
| Code: |
rc-update del net.eth0 default
rc-update add net.eth0 boot
|
en het was opgelost.
heeft iets te maken met de nieuwe baselayout
grtz |
|
| Back to top |
|
|
azgaroth
n00b
Joined: 06 Jul 2003
Posts: 31
|
| Posted: Fri Nov 28, 2003 6:31 pm Post subject: |
|
|
hallo
het bleek dus zoals in de laatste post dat het in dezelfde run level moest geplaatst worden.  dit is blijkbaar verander want in men handleiding voor de installatie staat het dat het in verschillende moet gezet worden
thx voor de hulp |
|
| Back to top |
|
|
|
Dutch
