CaptainBlood
Advocate
Joined: 24 Jan 2010
Posts: 3999
|
 Posted: Tue Apr 07, 2020 5:44 pm Post subject: dmesg: ata3.00 LPM support broken, forcing max_power |
 |
|
I got this under | Code: | uname -r
5.6.2-gentoo |
SATA2 HD | Code: | IDE 200.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.Z4qWf_sACh7
Parent ID: abAj.p8sU12Rg_4A
SysFS ID: /class/block/sda
SysFS BusID: 2:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:17.0/ata3/host2/target2:0:0/2:0:0:0
Hardware Class: disk
Model: "ST1000LM024 HN-M"
Vendor: "ST1000LM024"
Device: "HN-M"
Revision: "0001"
Serial ID: "S32XJ9EF463019"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Files: /dev/sda, /dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S32XJ9EF463019, /dev/disk/by-id/wwn-0x50004cf20d0efa0c
Device Number: block 8:0-8:15
Geometry (Logical): CHS 121601/255/63
Size: 1953525168 sectors a 512 bytes
Capacity: 931 GB (1000204886016 bytes)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (SATA controller)
|
Is it due to SATA2? If not any idea what to check?
Thks 4 ur attention, interest & support. |
|
Kernel & Hardware
