| View previous topic :: View next topic |
| Author |
Message |
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
 Posted: Mon Dec 01, 2003 9:31 pm Post subject: GLX-Problem mit Kernel 2.6 [gelöst] |
 |
|
Kann mir jemand mit meiner xfree-config helfen?
| Code: | macfly@netkiffer:/> glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x22 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
macfly@netkiffer:/> glxgears
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
|
und als root bekomm ich | Code: | root@netkiffer:/> /usr/X11R6/bin/glxinfo
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Error: unable to open display (null)
|
Dies kommt auch immer, wenn ich als root ein Prog mit gui aufrufe...
Was stimmt da nicht?
Last edited by Mac Fly on Sat Jan 03, 2004 5:09 am; edited 1 time in total |
|
| Back to top |
|
 |
ProtectionFault
Apprentice
Joined: 14 Nov 2003
Posts: 170
Location: /dev/zero
|
| Posted: Tue Dec 02, 2003 12:22 pm Post subject: |
|
|
Was hast du fuer eine Grafikkarte?
Falls du eine Nvidia Karte hast, musst du den Treiber mit dem Patch von www.minion.de neu installieren...
_________________
ASUS Z87-PLUS, i7-4770, 2x8GB DDR3-1600, 700W OCZ Power Supply, EVGA GTX760 4GB, 3TB HDD, Gentoo ~amd64 (3.10.10, dm-crypt full disk, awesome) |
|
| Back to top |
|
|
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
| Posted: Tue Dec 02, 2003 10:59 pm Post subject: |
|
|
Jep, is ne NVidia Gforce 2 mx 
Besten Dank, werd ich bei Gelegenheit mal testen  |
|
| Back to top |
|
|
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
| Posted: Mon Dec 22, 2003 8:01 pm Post subject: |
|
|
Bei meinem aktuellen Kernel wird AFAIK der Patch schon beim emergen hinzugefügt.
Das Prob besteht aber weiterhin... |
|
| Back to top |
|
|
UTgamer
Veteran
Joined: 10 Aug 2003
Posts: 1326
Location: Troisdorf (Köln) Deutschland
|
| Posted: Mon Dec 22, 2003 9:13 pm Post subject: |
|
|
Ich hatte auch mal ein gleiches oder ähnliches Problem und hatte es nicht von alleine geschaft.
Tip 1: Ich vermute dein glx Modul ist nicht sauber installiert. Wegen der Meldung:
Xlib: extension "GLX" missing on display ":0.0"
Nachholen mit emerge nvidia-glx
Und da du gleichzeitig noch diesen Fehler hast:
Error: couldn't get an RGB, Double-buffered visual
Musst du an dieser Stelle:
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
^ eine Raute (#) einsetzen, oder den nvidia-treiber auch noch gleich mal neu emergen.
Tip 2: Konfig wegkopieren und eine neue mit dem "öden" Konfigtool neu erstellen, dann wen es läuft von Hand die nvidia Teile einfügen.
Es liegt evtl auch an der XF86Config als Beispiel mal meine relevanten Abschnitte:
| Code: |
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
DisplaySize 360 270
HorizSync 31-91
Identifier "Monitor[0]"
ModelName "1280X1024@85HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-85
UseModes "Modes[0]"
ModeLine "1152x864/84Hz" 135 1152 1464 1592 1776 864 864 876 908 +HSync +VSync
ModeLine "1280x1024/85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 66.29 1024 1040 1216 1328 768 768 775 802
Modeline "1024x768" 79.55 1024 1040 1216 1328 768 768 777 802
Modeline "1024x768" 89.75 1024 1040 1216 1328 768 768 778 802
Modeline "800x600" 40.56 800 816 928 1040 600 600 606 626
Modeline "800x600" 48.67 800 816 928 1040 600 600 607 626
Modeline "800x600" 54.91 800 816 928 1040 600 600 608 626
Modeline "640x480" 25.96 640 656 720 832 480 480 485 501
Modeline "640x480" 31.15 640 656 720 832 480 480 485 501
Modeline "640x480" 35.14 640 656 720 832 480 480 486 501
Modeline "1280x1024" 157.50 1280 1328 1488 1728 1024 1025 1028 1072
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024/85Hz" "1024x768" "800x600" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024/85Hz" "1024x768" "800x600" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024/85Hz" "1024x768" "800x600" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024/85Hz" "1024x768" "800x600" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024/85Hz" "1024x768" "800x600" "640x480"
Virtual 0 0
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "GeForce2 Ultra"
# Driver "nv"
Driver "nvidia"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "NVidia"
Option "NvAGP" "3"
Option "DigitalVibrance" "0"
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen[0]"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
So jetzt wollen die definierten Screens ja auch noch angesprochen werden. Mit den folgenden Einträgen lege ich diese Screens fest; und ein kleiner Nebeneffekt ist noch das ich jetzt auch als Benutzer mehrere Screens nutzen kann. Dieser Eintrag ist normalerweise für den Anmeldemanager kdm, aber ich glaube nachdem die diese Settings gemacht hatte waren meine
Error: unable to open display (null) , Fehlermeldungen weg.
So sieht zB. dann auch die /etc/X11/xdm/Xservers Datei aus:
| Code: |
# :0 local /usr/X11R6/bin/X :0 vt07
:0 local@tty1 /usr/X11R6/bin/X :0 -dpi 100 -nolisten tcp vt7
:1 local reserve /usr/X11R6/bin/X :1 -dpi 100 -nolisten tcp vt8
:2 local reserve /usr/X11R6/bin/X :2 -dpi 100 -nolisten tcp vt9
:3 local reserve /usr/X11R6/bin/X :3 -dpi 100 -nolisten tcp vt10
|
|
|
| Back to top |
|
|
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
| Posted: Tue Dec 23, 2003 8:32 pm Post subject: |
|
|
Ich krieg das nicht hin, so ein Mist.
Hier mal meine /etc/X11/XF86Config | Code: | # **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe" # This loads the DBE extension module.
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "AutoRepeat" "500 30"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "mv700"
HorizSync 30-70
VertRefresh 50-100
# 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 85.0Hz; hfreq=43.269001, vfreq=85.008003
ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 85.0Hz; hfreq=53.674000, vfreq=85.060997
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 85.0Hz; hfreq=68.677002, vfreq=84.997002
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "gforce2mx"
Driver "nv"
VendorName "All"
BoardName "All"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen1"
Device "gforce2mx"
Monitor "mv700"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 32
Modes "1152x864"
ViewPort 0 0
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
dann hab ich mal | Code: | | startx &> /home/macfly/log.txt |
ausgeführt und danach X wieder beendet.
Die log.txt | Code: | hostname: Unknown host
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-gss i686 [ELF]
Build Date: 06 December 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Dec 23 20:18:06 2003
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXLastContext from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXFree from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
Symbol __glXMalloc from module /usr/X11R6/lib/modules/extensions/libGLcore.a is unresolved!
(EE) [GLX]: Failed to add GLX extension (NVIDIA XFree86 driver not found)
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
X connection to :0.0 broken (explicit kill or server shutdown).
xinit: connection to X server lost. |
nvidia-kernel und nvidia-glx wurden neu emerged und ein modules-update wurde danach auch ausgeführt.
Wo is da der Wurm drin? |
|
| Back to top |
|
|
el*Loco
Tux's lil' helper
Joined: 29 Jan 2003
Posts: 91
Location: Cologne, Germany
|
| Posted: Tue Dec 23, 2003 9:36 pm Post subject: |
|
|
Hilft vielleicht ein
| Code: | | opengl-update nvidia |
?
_________________
WARNING: Do not let Dr. Mario touch your genitals. He is not a real doctor! |
|
| Back to top |
|
|
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
| Posted: Tue Dec 23, 2003 9:42 pm Post subject: |
|
|
Leider wars das au net.
Muss das Command nach jedem reboot ausgeführt werden oder nur einmal?
| Code: | macfly@netkiffer:~> sudo opengl-update nvidia
Password:
* Switching to nvidia OpenGL interface... [ ok ]
macfly@netkiffer:~> glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x22 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
|
|
|
| Back to top |
|
|
JOHNY_B
n00b
Joined: 18 Dec 2003
Posts: 6
|
| Posted: Fri Dec 26, 2003 2:17 pm Post subject: |
|
|
I have got the same problem under X I couldn't run q3a or ut2003 it displays me something:
bash-2.05b$ ut2003
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Couldn't set video mode: Couldn't find matching GLX visual
History:
Exiting due to error
and nothing else |
|
| Back to top |
|
|
RealGeizt
l33t
Joined: 22 Apr 2003
Posts: 700
|
| Posted: Fri Dec 26, 2003 6:08 pm Post subject: |
|
|
| emerged mal die neuen treiber für den 2.6 kernel. sprich: nvidia-kernel und nvidia-glx. die neusten treiber sind noch maskiert! |
|
| Back to top |
|
|
JOHNY_B
n00b
Joined: 18 Dec 2003
Posts: 6
|
| Posted: Fri Dec 26, 2003 11:00 pm Post subject: |
|
|
Ok it's fix
mine friend fix it
there was problem with kernel (miss one module) and chmod, emerge nvidia-kernel and glx has nothing to do it
My brother install new kernel and he don't relaod it |
|
| Back to top |
|
|
Mac Fly
Guru
Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart
|
| Posted: Sat Jan 03, 2004 5:10 am Post subject: |
|
|
Ich habs: | Code: | Section "Device"
Identifier "gforce2mx"
Driver "nv" |
und es funktioniert auf einmal |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
