| View previous topic :: View next topic |
| Author |
Message |
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
 Posted: Wed Dec 03, 2003 11:50 pm Post subject: Hard disk lentiiiissimi |
 |
|
Premetto che ho gia' spulciato il forum, ma tutti i tip proposti (perlomeno quelli in una lingua a me comprensibile) non hanno avuto successo.
Ho montato 4 dischi ide su un controller ide aggiuntivo su slot pci sil0680. Il problema e' che risultano lenti in una maniera vergognosa. Ad Esempio:
| Code: | kayak root # hdparm /dev/hdc
/dev/hdc:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 64 (on)
geometry = 15017/255/63, sectors = 241254720, start = 0
kayak root # hdparm -i /dev/hdc
/dev/hdc:
Model=IC35L120AVVA07-0, FwRev=VA6OA52A, SerialNo=VNC602A6C96P1G
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=241254720
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
kayak root # hdparm -tT /dev/hdc
/dev/hdc:
Timing buffer-cache reads: 352 MB in 2.00 seconds = 175.56 MB/sec
Timing buffered disk reads: 6 MB in 3.06 seconds = 1.96 MB/sec
kayak root # |
Per impostare il disco ho usato "hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdc"... Pero' non e' che renda molto... Idee?
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
 |
zUgLiO
l33t
Joined: 12 Aug 2003
Posts: 754
Location: Ferrara (Italy)
|
| Posted: Wed Dec 03, 2003 11:55 pm Post subject: |
|
|
hai provato semplicemente a lanciare lo script di hdparm?
| Code: | | /etc/init.d/hdparm start |
_________________
voglio poi dire che il tempo mi avrà fatto abituare,
ma io non trovo nemmeno brutta la stiva buia di questa nave
|
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Dec 04, 2003 12:11 am Post subject: |
|
|
Of course 
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Thu Dec 04, 2003 10:29 am Post subject: |
|
|
I quattro dischi di che tipo sono?
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Dec 04, 2003 2:28 pm Post subject: |
|
|
Sono 3 ibm GXP (2x100gb e 1x120gb) e 1 maxtor diamond plus 9 (80gb)
Onde evitare di tralasciae particolari importanti:
| Code: | kayak root # hdparm -i /dev/hdc
/dev/hdc:
Model=IC35L120AVVA07-0, FwRev=VA6OA52A, SerialNo=VNC602A6C96P1G
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=241254720
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
kayak root # hdparm -i /dev/hdd
/dev/hdd:
Model=IC35L100AVVA07-0, FwRev=VA5OA52A, SerialNo=VNC6R0A6G9PSLA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=201045600
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
kayak root # hdparm -i /dev/hde
/dev/hde:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2N7QH3E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
kayak root # hdparm -i /dev/hdf
/dev/hdf:
Model=IC35L100AVVA07-0, FwRev=VA5OA52A, SerialNo=VNC6R0A6GA92AA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=201045600
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
kayak root # |
Tutti collegati con cavi ata133 80 poli, gia' sostituiti
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Fri Dec 05, 2003 12:46 am Post subject: |
|
|
Ciao
io ho la tua stessa scheda ide (con due dischi in raid )
prima di tutto direi:
e se proprio nn lo digerisci prova con:
per il maxtor che supporta UDMA133
| Code: | | hdparm -X70 /dev/hde |
e per l'IBM che e' un UDMA100
| Code: | hdparm -X69 /dev/hdc
hdparm -X69 /dev/hdd |
Bye! |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Fri Dec 05, 2003 2:28 am Post subject: |
|
|
Non cambia nulla... Gia' che ci sei mi dici i moduli che hai abilitato nel kernel e se dai qualche opzione particolare al boot o chissa' dove?
Tnx 
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Sat Dec 06, 2003 1:16 am Post subject: |
|
|
Beh, devo dire che io ho dovuto applicare una patch al kernel x poter usare i dischi in raid, altrimenti il controller viene rilevato come un comunissimo ATA.
Apparte questo, nn ho fatto nulla di +
controlla solo d aver abilitato nel kernel PCI Bus master DMA e use PCI DMA by default when available
| Code: | [*] PCI IDE chipset support
[*] Generic PCI IDE Chipset Support
[*] Sharing PCI IDE interrupts support
[*] Generic PCI bus-master DMA support
[ ] Boot off-board chipsets first support <--questo lo devi abilitare solo se il disco con il quale fai il boot e' collegato alla scheda
[ ] Force enable legacy 2.0.X HOSTS to use DMA
[*] Use PCI DMA by default when available
[ ] Enable DMA only for disks
[ ] ATA Work(s) In Progress (EXPERIMENTAL)
<*> Silicon Image
< > SiS5513 chipset support
< > SLC90E66 chipset support
< > Tekram TRM290 chipset support
< > VIA82CXXX chipset support
[ ] IGNORE word93 Validation BITS
<*> Support for IDE Raid controllers (EXPERIMENTAL)
< > Support Promise software RAID (Fasttrak(tm)) (EXPERIMENTAL)
< > Highpoint 370 software RAID (EXPERIMENTAL)
<*> Medley software RAID (CMD/Silicon Image) |
Questo e' il mio kernel, potrebbe differire dal tuo in alcune voci x via della patch che ho applicato, cmq dovresti avere grosso modo le stesse cose abilitate e chiaramente se nn lo usi e' inutile che attivi il supporto x il raid .
Bye! |
|
| Back to top |
|
|
cn73
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 120
Location: Italy
|
| Posted: Sat Dec 06, 2003 9:55 am Post subject: |
|
|
| zUgLiO wrote: | hai provato semplicemente a lanciare lo script di hdparm?
| Code: | | /etc/init.d/hdparm start |
|
Cosa fa di preciso questo script?? |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Sat Dec 06, 2003 10:02 am Post subject: |
|
|
| cn73 wrote: |
Cosa fa di preciso questo script?? |
Avvia al boot hdparm.
"Cos'è hdparm?"
oppure una ricerca su internet che da ottimi risultati, tipo questo.
Per dirla alla freshmeat "hdparm is a Linux shell utility for viewing and manipulating various IDE drive and driver parameters. Most drives can benefit from improved performance using a command similar to "hdparm -qm8 -qu1 -qc1 -qd1 /dev/hda".
Buona lettura
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
cn73
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 120
Location: Italy
|
| Posted: Sat Dec 06, 2003 12:57 pm Post subject: |
|
|
Ti tingrazio Questo il mio output, che ti sembra? 
| Code: |
root@cn_machine cn73 # hdparm -i /dev/hda
/dev/hda:
Model=QUANTUM FIREBALLP AS30.0, FwRev=A1Y.1500, SerialNo=193115478862
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1902kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58633344
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
root@cn_machine cn73 # hdparm -i /dev/hdb
/dev/hdb:
Model=MAXTOR 6L020J1, FwRev=A93.0500, SerialNo=661203023907
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40132503
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
root@cn_machine cn73 # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 1152 MB in 2.00 seconds = 576.00 MB/sec
Timing buffered disk reads: 100 MB in 3.02 seconds = 33.11 MB/sec
oot@cn_machine cn73# hdparm -tT /dev/hdb
/dev/hdb:
Timing buffer-cache reads: 1100 MB in 2.00 seconds = 550.00 MB/sec
Timing buffered disk reads: 120 MB in 3.05 seconds = 39.34 MB/sec
|
|
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Sat Dec 06, 2003 1:25 pm Post subject: |
|
|
...ma gia' che ci sono...
com'e' che se do: | Code: | | bash-2.05b# hdparm -tT /dev/hda |
lui mi risponde con | Code: |
/dev/hda:
could not allocate sharedmem buf: Function not implemented
could not allocate sharedmem buf: Function not implemented
|
eppure il sistema nn e' lento...bah...stranezze..
P.S: mi sono agganciato qui x' mi sembrava un *simil-problema* un po' irrilevante x aprire un altro post |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Tue Dec 09, 2003 5:33 pm Post subject: |
|
|
Scusate ma ho avuto da fare in questi giorni...
Tornando al probelma di cui sopra: che kernel hai? io uso un 2.4.20-gentoo-r9e ho solo attivato il supporto x il cmd 680... senza tuning altrimenti la seconda porta ide non funziona
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Tue Dec 09, 2003 6:56 pm Post subject: |
|
|
io uso il 2.4.22 (vanilla)
posta qui il tuo kernel cosi' come l'ho messo io e vediamo se si trova qlcsa che nn va, oppure controlla di avere le cose che ho messo io.
| fiocchini wrote: | | senza tuning altrimenti la seconda porta ide non funziona |
cosa intendi? il canale ide della scheda madre? se e' cosi', quello avra' il suo driver a parte, come ho fatto io abilitando: | Code: | | <*> Intel PIIXn chipsets support |
che altri nn e' che il controllr ide integrato sulla scheda madre.
Cmq se posti la tua configurazione del kernel ci capiamo d+
Bye! |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Wed Dec 10, 2003 2:36 am Post subject: |
|
|
La macchina ha una sola porta ide integrata, essendo una workstation hp kayak XU/300 equipaggiata con un controller scsi.
Quando parlo di porta ide intendo la porta secondaria sul controller aggiuntivo ide: aggiungendo il tuning support infatti, la porta primaria funziona regolarmente mentre sulla seconda porta ide viene visto solo il primo device qualora ve ne siano attaccati due, nulla se ne attacco soltanto uno. Tutto cio' sia con "cable select" sia con l'impostazione "master+slave" dei jumper sugli hd.
Cmq ecco qua il kernel:
| Code: | <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
--- Please see Documentation/ide.txt for help/info on IDE drives
[ ] Use old disk-only driver on primary interface
<*> Include IDE/ATA-2 DISK support
[*] Use multi-mode by default
[ ] Auto-Geometry Resizing support
<*> Include IDE/ATAPI CDROM support
< > Include IDE/ATAPI TAPE support
< > Include IDE/ATAPI FLOPPY support
< > SCSI emulation support
[ ] IDE Taskfile Access
--- IDE chipset support/bugfixes
[ ] CMD640 chipset bugfix/support
[ ] ISA-PNP EIDE support
[ ] RZ1000 chipset bugfix/support
[*] Generic PCI IDE chipset support
[*] Sharing PCI IDE interrupts support
[*] Generic PCI bus-master DMA support
[ ] Force enable legacy 2.0.X HOSTS to use DMA
[*] Use PCI DMA by default when available
[ ] Enable DMA only for disks
[ ] ATA Work(s) In Progress (EXPERIMENTAL)
[ ] AEC62XX chipset support
[ ] ALI M15x3 chipset support
[ ] AMD and nVidia IDE support
[*] CMD64X and CMD680 chipset support
[ ] CMD680 chipset tuning support <----QUESTO DA PROBLEMI SULLA SEC IDE
[ ] CY82C693 chipset support
[ ] Cyrix CS5530 MediaGX chipset support
[ ] HPT34X chipset support
[ ] HPT366/368/370 chipset support
[*] Intel PIIXn chipsets support
[ ] PIIXn Tuning support
[ ] NS87415 chipset support (EXPERIMENTAL)
[ ] OPTi 82C621 chipset enhanced support (EXPERIMENTAL)
[ ] PROMISE PDC202{46|62|65|67|68|69|70} support
[ ] ServerWorks OSB4/CSB5 chipsets support
[ ] SiS5513 chipset support
[ ] SLC90E66 chipset support
[ ] Tekram TRM290 chipset support (EXPERIMENTAL)
[ ] VIA82CXXX chipset support
[*] Other IDE chipset support
--- Note: most of these also require special kernel boot parameters
[ ] Generic 4 drives/port support
[ ] ALI M14xx support
[ ] DTC-2278 support
[ ] Holtek HT6560B support
[ ] PROMISE DC4030 support (EXPERIMENTAL)
[ ] QDI QD65xx support
[ ] UMC-8672 support
[ ] IGNORE word93 Validation BITS
< > Support for IDE Raid controllers (EXPERIMENTAL) |
E gia' che ci siamo ecco pure un lspci:
| Code: | 00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:08.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
00:09.0 SCSI storage controller: Adaptec AIC-7860 (rev 03)
00:10.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II]
00:11.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 02)
00:13.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
|
Spero di essere stato sufficientemente esauriente
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Wed Dec 10, 2003 1:24 pm Post subject: |
|
|
uhm..l'unica cosa che mi viene in mente a questo punto e' di provare con un kernel + aggiornato o provare un altro tipo di kernel...ho il vago sospetto che in quello che usi la scheda nn sia supportata molto bene...
Fai qlche prova...tanto peggio di cosi' nn credo che possa andare
Bye! |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Wed Dec 10, 2003 1:46 pm Post subject: |
|
|
eheh a questo punto non mi resta che provare il vanilla e vedere se ci ricavo qualcosa di buono...
mi basta dare emerge vanilla-sources, compilarlo e aggiornare bootloader e link in usr/src/linux vero?
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
^Sporting^
Tux's lil' helper
Joined: 06 Oct 2003
Posts: 131
Location: 009°11'28'' E 045°36'39'' N
|
| Posted: Wed Dec 10, 2003 7:18 pm Post subject: |
|
|
Si, nn in quest'ordine xo'
| Code: | emerge vanilla-sources
aggiorna il link in /usr/src/linux
compila
e aggiorna il bootloader |
Buona fortuna!
Bye! |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30965
Location: here
|
| Posted: Wed Dec 10, 2003 9:49 pm Post subject: |
|
|
| ^Sporting^ wrote: | Si, nn in quest'ordine xo'
| Code: | emerge vanilla-sources
aggiorna il link in /usr/src/linux
compila
e aggiorna il bootloader |
Buona fortuna!
Bye! |
E sopratutto monta la cartella di /boot .
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Dec 11, 2003 1:19 am Post subject: |
|
|
Ehehe era solo x sicurezza... Queste cose le ho imparate a mie spese ormai
Cmq non cambia nulla... stessa velocita' ridicola (2mb/s)
Dai stupitemi, tirate fuori qsa dal cilindro magico
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Thu Dec 11, 2003 6:54 am Post subject: |
|
|
Ma non ho capito: cosa ti aspetti dal tuo harddisk?
| Code: | cerrito on GSM root # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 604 MB in 2.01 seconds = 300.39 MB/sec
Timing buffered disk reads: 46 MB in 3.09 seconds = 14.87 MB/sec
cerrito on GSM root # hdparm -i /dev/hda
/dev/hda:
Model=IC25T048ATDA05-0, FwRev=DA8OA76A, SerialNo=68B68LJ3313
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=1806kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=93759120
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:
* signifies the current active mode |
Capisco che il tuo HDD e' molto diverso dal mio, ma non mi sembra nemmeno che ti debba aspettare chissà che.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Dec 11, 2003 11:16 am Post subject: |
|
|
Su un altro pc con su dischi identici riesco a trasferire da un disco all'altro (su porte ide differenti) ad una velocita' di 20mb/s, su questa macchina invece a piu' di 2mb/s non vado... Un fattore 10 di differenza non e' molto normale a mio avviso... O no?
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Thu Dec 11, 2003 1:07 pm Post subject: |
|
|
Come misuri questa differenza? Guarda che devi considerare:
1) piastra madre,
2) chipset (e non e' la stessa cosa di cui sopra)
3) impostazioni bios,
4) configurazioni dei dischi (jumper),
5) cablatura,
6) configurazione OS.
Mi sembra che tu stia facendo una ricerca del problema a ritroso... 
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Dec 11, 2003 1:58 pm Post subject: |
|
|
Uhm... In poche parole mi stai dicendo di lasciar perdere? Ok, pero' mi ruga... Non capisco il perche' di questa lentezza, non ha senso
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
MyZelF
Bodhisattva
Joined: 25 Feb 2003
Posts: 2010
Location: Venice, Italy
|
| Posted: Thu Dec 11, 2003 3:38 pm Post subject: Re: Hard disk lentiiiissimi |
|
|
| flocchini wrote: | | Ho montato 4 dischi ide su un controller ide aggiuntivo su slot pci sil0680. |
Ma alla fine hai provato con un kernel più recente? Io uso il 2.4.23-ck1 e mi pare ci siano novità relative al tuo controller rispetto al 2.4.20:
| Code: |
< > Silicon Image chipset support (NEW) |
| Code: | CONFIG_BLK_DEV_SIIMAGE:
This driver provides (U)DMA support for the SII3112 SATA controllers an
for the CMD/SI680 UDMA/DMA ATA controller.
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
