| View previous topic :: View next topic |
| Author |
Message |
mile_slo
Tux's lil' helper
Joined: 29 Apr 2003
Posts: 91
Location: Ljubljana, Slovenia
|
 Posted: Thu Dec 04, 2003 8:13 pm Post subject: pptp problems with 2.6.0 |
 |
|
hello
Before kernel update (from 2.4.20 to 2.6.0-test11-love1)I had working VPN connection to another location.
With new kernel , I cant connect any more...
I applied this patch to kernel
http://www.polbox.com/h/hs001/linux-2.6.0-mppe-mppc-0.98.patch.gz
pppd is
http://www.polbox.com/h/hs001/ppp-2.4.2-cvs20030715.tar.gz
with this patch
http://www.polbox.com/h/hs001/ppp-2.4.2-mppe-mppc-0.82.patch.gz
Here are my options for pppd
| Code: |
noauth
lock
nobsdcomp
nodeflate
mppe required
mppe stateless
mtu 1000
mru 1000
debug
dump
logfd 2
nodetach
lcp-echo-failure 10
lcp-echo-interval 10
|
and output looks like this
| Code: |
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 10.0.0.2>]
rcvd [CCP ConfNak id=0x1 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x2]
rcvd [CCP ConfReq id=0x5 <mppe +H -M +S -L -D +C>]
sent [CCP ConfNak id=0x5 <mppe +H +M +S +L -D +C>]
rcvd [IPCP ConfAck id=0x2 <addr 10.0.0.2>]
local IP address 10.0.0.2
remote IP address xxx.77.147.92
Script /etc/ppp/ip-up started (pid 6136)
Script ?? finished (pid 6127), status = 0x0
Script /etc/ppp/ip-up finished (pid 6136), status = 0x0
rcvd [CCP ConfNak id=0x2 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x3]
rcvd [CCP ConfReq id=0x6 <mppe +H -M +S -L -D +C>]
sent [CCP ConfNak id=0x6 <mppe +H +M +S +L -D +C>]
rcvd [CCP ConfNak id=0x3 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x4]
rcvd [CCP ConfReq id=0x7 <mppe +H -M +S -L -D +C>]
sent [CCP ConfNak id=0x7 <mppe +H +M +S +L -D +C>]
rcvd [CCP ConfNak id=0x4 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x5]
rcvd [CCP ConfReq id=0x8 <mppe +H -M +S -L -D +C>]
sent [CCP ConfNak id=0x8 <mppe +H +M +S +L -D +C>]
rcvd [CCP ConfNak id=0x5 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x6]
rcvd [CCP ConfReq id=0x9 <mppe +H -M +S -L -D +C>]
sent [CCP ConfRej id=0x9 <mppe +H +M +S +L -D +C>]
rcvd [CCP ConfNak id=0x6 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x7]
rcvd [CCP ConfNak id=0x7 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x8]
rcvd [CCP ConfNak id=0x8 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0x9]
rcvd [CCP ConfNak id=0x9 <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0xa]
rcvd [CCP ConfNak id=0xa <mppe -H -M -S -L -D -C>]
sent [CCP ConfReq id=0xb]
rcvd [LCP TermReq id=0xa 0a 44 5c 48 00 3c cd 74 00 00 02 e6]
LCP terminated by peer (^JD\H^@<M-Mt^@^@^BM-f)
Script /etc/ppp/ip-down started (pid 6138)
sent [LCP TermAck id=0xa]
Script /etc/ppp/ip-down finished (pid 6138), status = 0x0
Connection terminated.
Connect time 0.1 minutes.
Sent 140 bytes, received 190 bytes.
|
Any idea?
thanks |
|
| Back to top |
|
 |
mile_slo
Tux's lil' helper
Joined: 29 Apr 2003
Posts: 91
Location: Ljubljana, Slovenia
|
| Posted: Sat Dec 06, 2003 1:19 pm Post subject: |
|
|
nobody?  |
|
| Back to top |
|
|
scraglar
n00b
Joined: 30 Sep 2003
Posts: 2
|
| Posted: Sat Jan 03, 2004 7:55 pm Post subject: |
|
|
Hello,
Did you figure it out? I am running a 2.6.0 kernel and have it working. There is another patch you need to apply. If you go to the above mentioned website, at the bottom of the page, you will find the patch, I believe it should fix your problem. I was getting the same errors as you. Hope this helps.
Jason |
|
| Back to top |
|
|
alterself.com
Apprentice
Joined: 13 Nov 2003
Posts: 175
Location: Iowa
|
| Posted: Wed Feb 11, 2004 7:58 pm Post subject: patch? |
|
|
| How do you "apply the patches"? |
|
| Back to top |
|
|
|
Networking & Security
