| View previous topic :: View next topic |
| Author |
Message |
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
 Posted: Sun Nov 15, 2020 8:58 pm Post subject: Display messed up with kernel version 5.4.72 |
 |
|
After a long time of not updating the kernel, I finally got around to doing this. Unfortunately, when I start a desktop session, the display is messed up. There are sets of rectangles that appear to be in the wrong place on the screen.
See image:
https://ibb.co/SfjMXpV
This only happens with 5.4.72. It is independent of the user (I created a new user to test this).
I am running an AMD CPU with onboard graphics:
| Code: | more /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 23
model : 17
model name : AMD Ryzen 3 2200G with Radeon Vega Graphics
stepping : 0
microcode : 0x8101016
cpu MHz : 2524.867
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext f
xsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1
sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wd
t tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed
adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass
bogomips : 6987.53
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14] |
| Code: | lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0]
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7
01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller (rev 01)
01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)
01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
07:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] (rev 10)
08:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] (rev c8)
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller
09:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
09:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
09:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
09:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller
0a:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61)
|
Note that I have booted into the old kernel so that I can post this:
| Code: |
$ emerge --info
/usr/lib64/python3.6/site-packages/portage/package/ebuild/_config/KeywordsManager.py:69: UserWarning: /etc/portage/package.keywords is deprecated, use /etc/portage/package.accept_keywords instead
UserWarning)
Portage 3.0.8 (python 3.6.12-final-0, default/linux/amd64/17.1, gcc-9.3.0, glibc-2.32-r2, 4.19.82-gentoo-systemd x86_64)
=================================================================
System uname: Linux-4.19.82-gentoo-systemd-x86_64-AMD_Ryzen_3_2200G_with_Radeon_Vega_Graphics-with-gentoo-2.7
KiB Mem: 14267160 total, 5395740 free
KiB Swap: 10485756 total, 10485756 free
Timestamp of repository gentoo: Sat, 14 Nov 2020 19:00:01 +0000
Head commit of repository gentoo: 45f5f956082f662b8551dde6b9ef532c1fc0b514
Head commit of repository java: fa5711b35fdd36112cadee95cbb5a56cfa492dcc
Head commit of repository nx: f1e8a1e5ab44439275a274d1e5ec4ac9cd857b2f
Head commit of repository yurij-overlay: 7d0d8f3ef5e02c663f32021319b0f4756e664a47
sh bash 5.0_p18
ld GNU ld (Gentoo 2.34 p6) 2.34.0
app-shells/bash: 5.0_p18::gentoo
dev-java/java-config: 2.3.1::gentoo
dev-lang/perl: 5.30.3::gentoo
dev-lang/python: 3.6.12::gentoo, 3.7.9::gentoo, 3.8.5::gentoo, 3.9.0::gentoo
dev-util/cmake: 3.17.4-r1::gentoo
dev-util/pkgconfig: 0.29.2::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/openrc: 0.42.1::gentoo
sys-apps/sandbox: 2.20::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
sys-devel/automake: 1.13.4-r2::gentoo, 1.16.1-r1::gentoo
sys-devel/binutils: 2.34-r2::gentoo
sys-devel/gcc: 9.3.0-r1::gentoo
sys-devel/gcc-config: 2.3.2::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.2.1-r4::gentoo
sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.32-r2::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-max-age: 24
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
localrepo
location: /home/localrepo
masters: gentoo
java
location: /var/lib/layman/java
sync-type: git
sync-uri: git://anongit.gentoo.org/proj/java.git
masters: gentoo
priority: 50
nx
location: /var/lib/layman/nx
sync-type: git
sync-uri: https://anongit.gentoo.org/git/proj/nx.git
masters: gentoo
priority: 50
yurij-overlay
location: /var/lib/layman/yurij-overlay
sync-type: git
sync-uri: https://github.com/yurijmikhalevich/yurij-overlay.git
masters: gentoo
priority: 50
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -mtune=generic"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/maven-bin-3.6/conf /var/bind"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -mtune=generic"
DISTDIR="/usr/portage/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="3dnow X acl alsa amd64 apm berkdb bluetooth bzip2 cdr cli crypt cups dbus dri dv dvd dvdr dvdread elogind esd fortran gdbm gimpprint gphoto2 iconv ipv6 jpeg libglvnd libtirpc lm_sensors logrotate mbox mjpeg mmx mp3 mpeg mtp multilib ncurses nls nptl ogg openmp pam pcre png ppds pulseaudio python readline samba seccomp split-usr sse sse2 ssl swat sync-plugin-portage tcpd tiff truetype unicode usb vcd vim-syntax wmf x265 xattr zlib" ABI_X86="64 32" ADA_TARGET="gnat_2018" ALSA_CARDS="intel8x0" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 f16c fma3 mmx mmxext pclmul popcnt sha sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64 pc" INPUT_DEVICES="evdev keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2 php7-3 php7-4" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_7" PYTHON_TARGETS="python2_7 python3_7" RUBY_TARGETS="ruby25 ruby26" SANE_BACKENDS="hp" USERLAND="GNU" VIDEO_CARDS="amdgpu radeonsi vesa r600" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
|
|
| Back to top |
|
 |
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Fri Nov 20, 2020 9:52 pm Post subject: |
|
|
| No ideas from anyone? |
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Fri Nov 27, 2020 7:23 pm Post subject: Display messed up with kernel version 5.4.72 |
|
|
I haven't got any responses to this in the Kernel and Hardware forum, so I was wondering if a Desktop expert might be able to shed some light on the problem. The issue only affects desktop logins, so perhaps this is a more appropriate forum?
Original post is here:
https://forums.gentoo.org/viewtopic-t-1123534.html?sid=62f7c5d38339bdfe146a6d0a2ad2b384
After a long time of not updating the kernel, I finally got around to doing this. Unfortunately, when I start a desktop session, the display is messed up. There are sets of rectangles that appear to be in the wrong place on the screen.
See image:
https://ibb.co/SfjMXpV
This only happens with 5.4.72. It is independent of the user (I created a new user to test this).
I am running an AMD CPU with onboard graphics:
| Code: | more /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 23
model : 17
model name : AMD Ryzen 3 2200G with Radeon Vega Graphics
stepping : 0
microcode : 0x8101016
cpu MHz : 2524.867
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext f
xsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1
sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wd
t tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed
adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass
bogomips : 6987.53
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14] |
| Code: | lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0]
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7
01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller (rev 01)
01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)
01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
07:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] (rev 10)
08:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] (rev c8)
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller
09:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
09:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
09:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
09:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller
0a:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61)
|
Note that I have booted into the old kernel so that I can post this:
| Code: |
$ emerge --info
/usr/lib64/python3.6/site-packages/portage/package/ebuild/_config/KeywordsManager.py:69: UserWarning: /etc/portage/package.keywords is deprecated, use /etc/portage/package.accept_keywords instead
UserWarning)
Portage 3.0.8 (python 3.6.12-final-0, default/linux/amd64/17.1, gcc-9.3.0, glibc-2.32-r2, 4.19.82-gentoo-systemd x86_64)
=================================================================
System uname: Linux-4.19.82-gentoo-systemd-x86_64-AMD_Ryzen_3_2200G_with_Radeon_Vega_Graphics-with-gentoo-2.7
KiB Mem: 14267160 total, 5395740 free
KiB Swap: 10485756 total, 10485756 free
Timestamp of repository gentoo: Sat, 14 Nov 2020 19:00:01 +0000
Head commit of repository gentoo: 45f5f956082f662b8551dde6b9ef532c1fc0b514
Head commit of repository java: fa5711b35fdd36112cadee95cbb5a56cfa492dcc
Head commit of repository nx: f1e8a1e5ab44439275a274d1e5ec4ac9cd857b2f
Head commit of repository yurij-overlay: 7d0d8f3ef5e02c663f32021319b0f4756e664a47
sh bash 5.0_p18
ld GNU ld (Gentoo 2.34 p6) 2.34.0
app-shells/bash: 5.0_p18::gentoo
dev-java/java-config: 2.3.1::gentoo
dev-lang/perl: 5.30.3::gentoo
dev-lang/python: 3.6.12::gentoo, 3.7.9::gentoo, 3.8.5::gentoo, 3.9.0::gentoo
dev-util/cmake: 3.17.4-r1::gentoo
dev-util/pkgconfig: 0.29.2::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/openrc: 0.42.1::gentoo
sys-apps/sandbox: 2.20::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
sys-devel/automake: 1.13.4-r2::gentoo, 1.16.1-r1::gentoo
sys-devel/binutils: 2.34-r2::gentoo
sys-devel/gcc: 9.3.0-r1::gentoo
sys-devel/gcc-config: 2.3.2::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.2.1-r4::gentoo
sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.32-r2::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-max-age: 24
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
localrepo
location: /home/localrepo
masters: gentoo
java
location: /var/lib/layman/java
sync-type: git
sync-uri: git://anongit.gentoo.org/proj/java.git
masters: gentoo
priority: 50
nx
location: /var/lib/layman/nx
sync-type: git
sync-uri: https://anongit.gentoo.org/git/proj/nx.git
masters: gentoo
priority: 50
yurij-overlay
location: /var/lib/layman/yurij-overlay
sync-type: git
sync-uri: https://github.com/yurijmikhalevich/yurij-overlay.git
masters: gentoo
priority: 50
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -mtune=generic"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/maven-bin-3.6/conf /var/bind"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -mtune=generic"
DISTDIR="/usr/portage/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="3dnow X acl alsa amd64 apm berkdb bluetooth bzip2 cdr cli crypt cups dbus dri dv dvd dvdr dvdread elogind esd fortran gdbm gimpprint gphoto2 iconv ipv6 jpeg libglvnd libtirpc lm_sensors logrotate mbox mjpeg mmx mp3 mpeg mtp multilib ncurses nls nptl ogg openmp pam pcre png ppds pulseaudio python readline samba seccomp split-usr sse sse2 ssl swat sync-plugin-portage tcpd tiff truetype unicode usb vcd vim-syntax wmf x265 xattr zlib" ABI_X86="64 32" ADA_TARGET="gnat_2018" ALSA_CARDS="intel8x0" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 f16c fma3 mmx mmxext pclmul popcnt sha sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64 pc" INPUT_DEVICES="evdev keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2 php7-3 php7-4" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_7" PYTHON_TARGETS="python2_7 python3_7" RUBY_TARGETS="ruby25 ruby26" SANE_BACKENDS="hp" USERLAND="GNU" VIDEO_CARDS="amdgpu radeonsi vesa r600" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
Update:
My searching reveals this bug report, which looks similar:
https://bugs.launchpad.net/ubuntu-mate/+bug/1877762
But no resolution of the issue. |
|
| Back to top |
|
|
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3948
|
| Posted: Fri Nov 27, 2020 11:52 pm Post subject: |
|
|
Hi
please try if it works with
| Code: |
emerge -av gentoo-kernel-bin-5.4.72
|
If it works my advice to you stick with that.
Albeit a bit large it is professionally configured and should work nicely.
_________________
 |
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Sat Nov 28, 2020 12:12 am Post subject: |
|
|
| alamahant wrote: | Hi
please try if it works with
| Code: |
emerge -av gentoo-kernel-bin-5.4.72
|
If it works my advice to you stick with that.
Albeit a bit large it is professionally configured and should work nicely. |
Thank you for your suggestion, which I have tried. Unfortunately, it did not improve the display.
I did find someone else reporting what may be the same problem on an Ubuntu MATE system, which might suggest that the problem really lies in MATE:
https://bugs.launchpad.net/ubuntu-mate/+bug/1877762 |
|
| Back to top |
|
|
Tony0945
Watchman
Joined: 25 Jul 2006
Posts: 5127
Location: Illinois, USA
|
| Posted: Sat Nov 28, 2020 2:15 am Post subject: |
|
|
Mate stores those locations in , I believe, gvfs, on a per user basis. Typically, for a new user or other change, Mate will arrange the icons in a rectangular pattern on the left side of the screen. Upper left if the number of icons is that small.
Are you saying that when running on the same machine with the same user, you get that rectangular pattern with 5.4.72 and not with something else with the same kernel configuration?
Have you tried 5.4.66?
As a test, arrange them manually in circke. Does this pattern survive reboot? |
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Sat Nov 28, 2020 2:58 am Post subject: |
|
|
| Tony0945 wrote: | Mate stores those locations in , I believe, gvfs, on a per user basis. Typically, for a new user or other change, Mate will arrange the icons in a rectangular pattern on the left side of the screen. Upper left if the number of icons is that small.
Are you saying that when running on the same machine with the same user, you get that rectangular pattern with 5.4.72 and not with something else with the same kernel configuration?
Have you tried 5.4.66?
As a test, arrange them manually in circke. Does this pattern survive reboot? |
Here is what mgnut's desktop looks like normally:
https://ibb.co/g7T1HBB
Note that the icon's are not moving: they are being displayed wrongly.
'mgnut' is a brand new user that was created with an empty home directory, just to show the problem. The problem occurs for both this new login and my normal login. Obviously, they have very different displays.
The problem does not occur when booted into 4.19.82. This is 100% reproducible on my system. As I noted above, it occurs with both the kernel that I built and with the 'gentoo-kernel-bin' version of 5.4.72. |
|
| Back to top |
|
|
Tony0945
Watchman
Joined: 25 Jul 2006
Posts: 5127
Location: Illinois, USA
|
| Posted: Sat Nov 28, 2020 4:39 am Post subject: |
|
|
| mgnut57 wrote: | The problem does not occur when booted into 4.19.82. This is 100% reproducible on my system. As I noted above, it occurs with both the kernel that I built and with the 'gentoo-kernel-bin' version of 5.4.72.
Back to top
View user's profile Send private message |
So you can reboot into 4.19.82 and the icon placement changes? And changes again if you boot back to 5.4.72?
Not just the first time, but reproducibly.? I'm just rying to clarify the boundaries of the problem.
EDIT:
OK, there are extra "ghost" icons and the bottom panel is shifted right. Like some kind of delay is writing the raster.
Sounds like videocard support problem. |
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Sat Nov 28, 2020 4:46 am Post subject: |
|
|
| Tony0945 wrote: | | mgnut57 wrote: | The problem does not occur when booted into 4.19.82. This is 100% reproducible on my system. As I noted above, it occurs with both the kernel that I built and with the 'gentoo-kernel-bin' version of 5.4.72.
Back to top
View user's profile Send private message |
So you can reboot into 4.19.82 and the icon placement changes? And changes again if you boot back to 5.4.72?
Not just the first time, but reproducibly.? I'm just rying to clarify the boundaries of the problem.
EDIT:
OK, there are extra "ghost" icons and the bottom panel is shifted right. Like some kind of delay is writing the raster.
Sounds like videocard support problem. |
Perhaps, yes.
Update: more searching suggests that it's a problem with the Xorg amdgpu driver:
https://bugzilla.redhat.com/show_bug.cgi?id=1739863 |
|
| Back to top |
|
|
ImmortalSoFar
n00b
Joined: 30 Nov 2020
Posts: 1
|
| Posted: Mon Nov 30, 2020 12:02 pm Post subject: |
|
|
| Yes, this appears to be the same bug. Going into that mode now produces the same results as yours with corrupted blocks and offsets rather than the clean tearing of the original. Glad I'm not going nuts! |
|
| Back to top |
|
|
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3911
Location: Rasi, Finland
|
| Posted: Mon Nov 30, 2020 12:29 pm Post subject: |
|
|
Try to change the resolution of your output display.
If the problem persists, then I'd mask the kernel version causing the issue and compile the last one which worked fine.
_________________
..: Zucca :..
| My gentoo installs: | init=/sbin/openrc-init
-systemd -logind -elogind seatd |
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Sat Feb 20, 2021 6:03 am Post subject: |
|
|
| Zucca wrote: | Try to change the resolution of your output display.
If the problem persists, then I'd mask the kernel version causing the issue and compile the last one which worked fine. |
The problem has gone away, but I wonder if this is due to swapping out the 4x3 display for a 16x10 display. |
|
| Back to top |
|
|
mgnut57
Guru
Joined: 12 Jan 2008
Posts: 309
|
| Posted: Sat Feb 20, 2021 6:07 am Post subject: |
|
|
| Update: the problem has gone away. I am not sure if this is due to updates to X or mesa or some other graphical component, but I also swapped out my monitor from an old 4x3 monitor to a newer 16x10 monitor. |
|
| Back to top |
|
|
pjp
Administrator
Joined: 16 Apr 2002
Posts: 20584
|
| Posted: Sat Feb 20, 2021 7:22 am Post subject: |
|
|
Please don't cross post, thanks.
Merged the two threads from two different forums.
_________________
Quis separabit? Quo animo? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
